Moxa Technologies DA-IRIGB-4DIO-PCI104-EMC4 Bedienungsanleitung

DA-IRIGB-4DIO-PCI104-EMC4 Module

User’s Manual

Edition 2.0, February 2017

www.moxa.com/product

DA-IRIGB-4DIO-PCI104-EMC4 Module

User’s Manual

The software described in this manual is furnished under a license agreement and may be used only in accordance with

the terms of that agreement.

Trademarks

The MOXA logo is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the part of

Moxa.

Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited

to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the

products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for

its use, or for any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas

Toll

-free: 1-888-669-2872

Tel:

+1-714-528-6777

Fax:

+1-714-528-6778

Moxa China (Shanghai office)

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia

-Pacific

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045

Table of Contents

1. Introduction...................................................................................................................................... 1-1

Overview...........................................................................................................................................1-2

Package Checklist...............................................................................................................................1-2

Product Features ................................................................................................................................1-2

Product Specifications .........................................................................................................................1-2

2. Hardware Installation ....................................................................................................................... 2-1

Block Diagram....................................................................................................................................2-2

Pin Assignments.................................................................................................................................2-2

IRIB-B Signal Input .....................................................................................................................2-2

Digital Input and Digital Output.....................................................................................................2-2

Installing the DA-IRIGB-4DIO-PCI104-EMC4..........................................................................................2-3

3. Software Installation and Configuration ........................................................................................... 3-1

Installing the IRIG-B Driver in Linux......................................................................................................3-2

Online Installation .......................................................................................................................3-2

Off-line Installation......................................................................................................................3-3

Using the timesync Daemon in Linux.....................................................................................................3-4

Examples ...................................................................................................................................3-5

Configuring the timesync Daemon.................................................................................................3-5

Using the IRIG-B Utility in Linux ...........................................................................................................3-5

Examples ...................................................................................................................................3-8

Installing the IRIG-B Driver in Windows 7............................................................................................3-10

Installing the IRIG-B Utility in Windows 7 ............................................................................................3-12

Using the IRIG-B Utility in Windows 7 .................................................................................................3-15

Configuring IRIG-B Parameters ..........................................................................................................3-16

Input Signal Type......................................................................................................................3-16

IRIG-B Parity Mode....................................................................................................................3-17

Configuring Time Synchronization Settings in Windows 7.......................................................................3-18

Selecting a Time Input Source ....................................................................................................3-18

Synchronizing with System Time.................................................................................................3-18

Configuring Digital Output and Input Status.........................................................................................3-19

Using the mxIrigUtil Command...........................................................................................................3-20

4. API Reference ................................................................................................................................... 4-1

Get IRIG-B Board Hardware ID.............................................................................................................4-2

Open IRIG-B Device............................................................................................................................4-2

Close IRIG-B Device............................................................................................................................4-2

Get Digital Input Signal .......................................................................................................................4-2

Get Digital Output Signal.....................................................................................................................4-3

Get IRIG-B Parity Check Mode..............................................................................................................4-3

Get Input Interface.............................................................................................................................4-3

Get IRIG-B Output Parity Check Mode ...................................................................................................4-4

Get Output Interface...........................................................................................................................4-4

Get Pule Per Second Output Width........................................................................................................4-4

Get IRIG-B Signal Status .....................................................................................................................4-5

GET RTC Synchronization Source..........................................................................................................4-5

Get RTC from IRIG-B Device ................................................................................................................4-5

Set Digital Output Signal .....................................................................................................................4-6

Set IRIG-B Input Parity Check Mode .....................................................................................................4-6

Set Input Interface .............................................................................................................................4-6

Set IRIG-B Output Parity Check Mode ...................................................................................................4-7

Set Output Interface ...........................................................................................................................4-7

Set Pulse Per Second Output Width.......................................................................................................4-7

Set RTC Synchronization Source...........................................................................................................4-7

Set RTC to IRIG-B Device ....................................................................................................................4-8

Synchronize System Local Time with IRIG RTC.......................................................................................4-8

IRIG-B Program Example.....................................................................................................................4-8

1. Introduction

Thank you for purchasing Moxa’s DA-IRIGB-4DIO-PCI104-EMC4 module for embedded computers that support

the PCI/104 interface.

The DA-IRIGB-4DIO-PCI104-EMC4 module features 3 digital inputs and 4 digital outputs and provides

precision timing information using IRIG-B input signals.

The following topics are covered in this chapter:



Overview



Package Checklist



Product Features



Product Specifications

DA-IRIGB-4DIO-PCI104-EMC4 Module Introduction

1-2

Overview

The DA-IRIGB-4DIO-PCI104-EMC4 module features 3 digital inputs and 4 digital outputs, and provides

precision timing information using IRIG-B input signals. The module is designed for embedded computers that

support the PCI/104 interface. The DA-IRIGB-4DIO-PCI104-EMC4 module includes two DB9 connectors for

IRIG-B input signals and DIOs in embedded computers.

The DA-IRIGB-4DIO-PCI104-EMC4 module includes jumpers that enable you to configure the I/O base address

and the INT vector for each port. In addition, the built-in EMC level 4 protection safeguards the module

connected to the IRIG-B input signals and digital input and digital output devices.

Package Checklist

MOXA performs a careful mechanical and electrical inspection of each module prior to shipping. Your module

should arrive in perfect electrical order, free of any marks or scratches. Please handle the module by the edges

only, since your body’s static charge can damage the integrated circuits. When the module is not in use, keep

it in the anti-static package provided. You may also use this package to return the module if it requires repair.

The DA-IRIGB-4DIO-PCI104-EMC4 module is shipped with the following items:

•DA-IRIGB-4DIO-PCI104-EMC4 module

•2 DB9 connectors

•4 15 mm M/F M3x6/M3x7 spacers

•4 4.8 mm M/F 4-40x7/4-40x4.75 spacers

•4 screws

•Quick installation guide (printed)

•Warranty card

NOTE

Please notify your sales representative if any of the above items are

missing or damaged.

Product Features

The DA-IRIGB-4DIO-PCI104-EMC4 module features the following:

•1 IRIG-B signal input port to support S/W controlled TTL/differential signal input

•3 digital inputs, 4 digital outputs

•Built-in EMC level 4 protection

•Configurable IRQ and I/O settings

•Onboard status LED indicators for IRIG-B signal input

Product Specifications

Hardware

Communication Controller:

FPGA Cyclone IV @ 25 MHz

Bus:

PCI/104

Connectors:

2-pin wafer, 10-pin wafer

Jumper:

PCI resource

Interface

Connector:

DB9 male

Protection

ESD Protection:

8 kV contact, 15 kV Air ESD protection

DA-IRIGB-4DIO-PCI104-EMC4 Module Introduction

1-3

Surge Protection:

2 kV line-to-line and 4 kV line-to-ground surge protection, 8/20 µs waveform

Input Signals

IRIG

-B: TTL or differential

Time Code Input

IRIG

-B: Based on the IRIG STANDARD 200-04 and IEEE 1344

Precision and Accuracy

Accuracy (

Time Synchronization): ±1 µs

Accuracy (Free Running):

±500 ms @ 24 hr

Timebase Precision:

±40 ns

Digital Input

Input Channels:

3, source type

Input Voltage:

0 to 30 VDC

Digital Input Levels for Dry Contacts:

• Logic level 0: Close to GND

• Logic lev

el 1: Open

Digital Input Levels for Wet Contacts:

• Logic level 0: +3 V max.

• Logic level 1: +10 V to +30 V (source to DI)

Isolation:

3 kV optical isolation

Connector Type:

DB9 male

Digital Output

Output Channels:

4, sink type

Output Current:

Max. 200 mA per channel

-state Voltage: 24 VDC nominal, open collector to 30 V

Isolation:

3 kV optical isolation

Connector Type:

DB9

Operating Systems

Windows:

Windows 7E

Linux:

Debian 7

Physical Characteristics

Dimensions:

90 x 96 mm (3.54 x 3.78 in)

Environmental Limits

Operating Temperature:

-10 to 60°C (14 to 140°F)

Storage Temperature:

-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity:

5 to 95% (non-condensing)

Altitude:

Up to 2000 m

Standards and Certifications

EMC:

CE, FCC

EMI

:EN 55032, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class A

EMS:

EN 55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC

61000

-4-8, IEC 61000-4-11

Green Product:

RoHS, CRoHS, WEEE

MTBF (mean time between failures)

Time:

1,145,189 hrs

Database:

Telcordia (Bellcore), GB

Power Requirements

Power Consumption:

2 W

Warranty

Warranty Period:

5 years

2. Hardware Installation

This chapter explains how to install the DA-IRIGB-4DIO-PCI104-EMC4 module.

The following topics are covered in this chapter:



Block Diagram



Pin Assignments

IRIB-B Signal Input

Digital Input and Digital Output



Installing the DA-IRIGB-4DIO-PCI104-EMC4

DA-IRIGB-4DIO-PCI104-EMC4 Module Hardware Installation

4-2

Block Diagram

Pin Assignments

This section includes the pin assignment for the male DB9 connectors to connect to an IRIG-B signal source or

a digital input (DI) or digital output (DO) device.

IRIB-B Signal Input

Pin Differential TTL

1 – –

2 – –

3 Data + TTL

4 Data - GND

5 – –

6 – –

7 – –

8 – –

9 – –

Digital Input and Digital Output

Pin 3DIs, 4DOs

1 DO 0

2 DO 1

3 DO 2

4 DO 3

5 DO COM

6 DI 0

7 DI 1

8 DI 2

9 DI Source

DA-IRIGB-4DIO-PCI104-EMC4 Module Hardware Installation

4-3

Installing the DA-IRIGB-4DIO-PCI104-EMC4

ATTENTION

To prevent damage to your system or the main board, make sure that you turn off the embedded computer

before installing the

DA-IRIGB-4DIO-PCI104-EMC4 module.

1. Turn off the embedded computer.

2. Connect the cables. Complete the following actions:

a. Connect the 2-wire IRIG-B input signal cable.

b. Connect the 4-wire IRIG-B output signal cable.

Andere Handbücher für DA-IRIGB-4DIO-PCI104-EMC4

Inhaltsverzeichnis

Andere Moxa Technologies Steuereinheit Handbücher

Moxa Technologies

Moxa Technologies CA Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPN008 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1261W-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CA Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E2-H Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ABC-01 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioMirror E3200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CB-108 Bedienungsanleitung

Moxa Technologies

Moxa Technologies Industio CI-134 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Z2150 Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPN001 Bedienungsanleitung

Moxa Technologies

Moxa Technologies WFS001 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPN005 Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPA003 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NE-4100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK-3252A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CA-134I Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCC-100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PWR-190-AC/DC Bedienungsanleitung

Moxa Technologies

Moxa Technologies EOM-104 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E1 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung