Moxa Technologies MiiNePort E Series Bedienungsanleitung

P/N: 1802000012013

*1802000012013*

MiiNePort E Series

Quick Installation Guide

Version 1.1, November 2019

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The Moxa MiiNePort E series of serial-to-Ethernet embedded modules

comes with four models: two standard operating temperature models

(MiiNePort E, MiiNePort E-H) and two wide operating temperature

models (MiiNePort E-T, MiiNePort E-H-T). Moxa provides a starter kit for

each MiiNePort E series module; each starter kit contains an evaluation

board that can be used to evaluate the modules and to develop your

own application. The following table lists the model names of all

MiiNePort E series modules, along with the model names of the

corresponding starter kits.

Available Modules

•MiiNePort E1: Embedded device server for TTL devices, drop-in

module, 10/100M with RJ45 connector, 50 bps to 230.4 Kbps

baudrate, 0 to 55°C operating temperature

•MiiNePort E1-T: Embedded device server for TTL devices, drop-in

module, 10/100M with RJ45 connector, 50 bps to 230.4 Kbps

baudrate, -40°C to 85°C operating temperature

•MiiNePort E1-H: Embedded device server for TTL devices, drop-in

module, 10/100M with RJ45 connector, 50 bps to 921.6 Kbps

baudrate, 0 to 55°C operating temperature

•MiiNePort E1-H-T: Embedded device server for TTL devices, drop-

in module, 10/100M with RJ45 connector, 50 bps to 921.6 Kbps

baudrate, -40 to 85°C operating temperature

•MiiNePort E2: Embedded device server for TTL devices, drop-in

module, 10/100M without RJ45 connector, 50 bps to 230.4 Kbps

baudrate, 0 to 55°C operating temperature

•MiiNePort E2-T: Embedded device server for TTL devices, drop-in

module, 10/100M without RJ45 connector, 50 bps to 230.4 Kbps

baudrate, -40 to 85°C operating temperature

•MiiNePort E2-H: Embedded device server for TTL devices, drop-in

module, 10/100M without RJ45 connector, 50 bps to 921.6 Kbps

baudrate, 0 to 55°C operating temperature

•MiiNePort E2-H-T: Embedded device server for TTL devices, drop-

in module, 10/100M without RJ45 connector, 50 bps to 921.6 Kbps

baudrate, -40 to 85°C operating temperature

•MiiNePort E3: Embedded device server for TTL devices, pin-

header module, 10/100M with RJ45 connector, 50 bps to 230.4

Kbps baudrate, 0 to 55°C operating temperature

•MiiNePort E3-T: Embedded device server for TTL devices, pin-

header module, 10/100M with RJ45 connector, 50 bps to 230.4

Kbps baudrate, -40 to 85°C operating temperature

•MiiNePort E3-H: Embedded device server for TTL devices, pin-

header module, 10/100M with RJ45 connector, 50 bps to 921.6

Kbps baudrate, 0 to 55°C operating temperature

•MiiNePort E3-H-T: Embedded device server for TTL devices, pin-

header module, 10/100M with RJ45 connector, 50 bps to 921.6

Kbps baudrate, -40 to 85°C operating temperature

- 3 -

Available Starter Kits

•MiiNePort E1-ST: Starter kit for the MiiNePort E1 Series, module

included

•MiiNePort E1-H-ST: Starter kit for the MiiNePort E1-H Series,

module included

•MiiNePort E2-ST: Starter kit for the MiiNePort E2 Series, module

included

•MiiNePort E2-H-ST: Starter kit for the MiiNePort E2-H Series,

module included

•MiiNePort E3-ST: Starter kit for the MiiNePort E3 Series, module

included

•MiiNePort E3-H-ST: Starter kit for the MiiNePort E3-H Series,

module included

Package Checklist

Each MiiNePort E Series starter kit package contains the following

items:

•1 MiiNePort E Series module

•1 MiiNePort E Series evaluation board

•1 universal power adapter

•2 power cords

•1 null modem serial cable

•1 cross-over Ethernet cable

•1 product warranty booklet

•2 flat cables (MiiNePort E3 Series only)

•1 pack of screw and spacer (MiiNePort E3 Series only)

•Quick installation guide (print)

•Warranty card

NOTE

Please notify your sales representative if any of the above

items are missing or damaged.

Hardware Installation Procedure

Follow these steps to prepare the module and evaluation board for

testing and application development.

STEP 1:

Plug the MiiNePort E module into the sockets on the top of

the evaluation board.

ATTENTION

For detailed information about the pin assignments, wiring, LED

indicators, and board layouts, refer to Chapter 1 and 2 of the

MiiNePort E Series User’s Manual.

STEP 2:

Connect the 12 to 48 VDC power line with the evaluation

board’s power jack.

STEP 3:

Switch on the power switch

STEP 4:

Use an RJ45 Ethernet cable to connect the MiiNePort E

module to an Ethernet network.

- 4 -

STEP 5:

Use the serial data cable to connect the evaluation board to a

serial device.

Software Utility Installation Procedure

Use the following installation procedure for each MiiNePort E model:

Software Installation

For software installation, download the relevant utilities from Moxa's

website: https://www.moxa.com/en/support

1. Start the Device Search Utility (DSU) setup program to begin

the installation. When the Welcome window opens, click Next.

2. Click Install to install program files in the default directory.

3. The Installing window reports the progress of the installation.

4. Click Finish to complete the installation.

Module Configuration

1. Start the DSU program.

2. Select the Search function from the function icons.

3. After the search is finished, all MiiNePort E modules that were found

will be shown in the search window. If you locate more than one

module connected to this network, refer to the MAC address on the

module(s) to determine the modules you wish to configure.

4. Double-click on the MiiNePort E module you wish to configure; your

web browser will be activated with the MiiNePort E’s web console.

5. The default IP address of the MiiNePort E is 192.168.127.254, and

the default login credentials:

username: admin

password: moxa

6. Refer to Chapter 7 of the MiiNePort E Series User’s Manual for

additional configuration instructions.

Evaluation Board Layout

E1 Series

- 5 -

E2 Series

Number

Description

MiiNePort E2 Module Location

Ethernet RJ45 Connector

Serial Interface Jumper

Power Switch

Power Jack

Power and Ready LED

DB9 Male Connector

Serial Port Status LED

Digital IO Terminal Block

Digital Output LED

Digital Input/Output Mode

Digital Input Switch

Circuit Pad

- 6 -

E3 Series

Number

Description

PoE Pin

MiiNePort E3 Module Location

Serial Interface Jumper

Power Switch

Power Jack

Power & Ready LED

DB9 Male Connector

Serial Port Status LED

Digital IO Terminal Block

Digital Output LED

Digital Input/Output Mode

Digital Input Switch

Circuit Pad

- 7 -

Pin Assignment

E1 Series

Serial Signal Pins (MiiNePort E1 Series Modules)

Function

GND

VCC

Reset

Data Out

Data In

Ready/RTSa

Reset to Defaultb

CTSc

a. Pin 6 can be configured as Ready/RTS (RequesttoSend), Ready/DO,

or RS-485 Tx Enabled (the default it Ready/RTS).

b. Pin 7 can be configured as Reset to Default, DIO, DTR, or RS-485

Tx Enabled (the default is Reset to Default).

c. Pin 8 can be configured as CTS (CleartoSend), DI, or DSR (the

default is CTS).

E2 Series

The bottom view of the MiiNePort E2 Series Module

JP1

Signal Name

Function

Ethernet Tx+

Ethernet Transmit Data+

Ethernet Tx-

Ethernet Transmit Data-

Ethernet Rx+

Ethernet Receive Data+

Ethernet Rx-

Ethernet Receive Data-

JP2

Signal Name

Function

100M LED

Ethernet 100M LED

10M LED

Ethernet 10M LED

LRXD

Receive Serial Data

LTXD

Transmit Serial Data

LDCD

Data Carrier Detect

RS485_EN

RS-485 Enable

LRTS

Request To Send

LDTR

Data Terminal Ready

LDSR

Data Set Ready

LCTS

Clear To Send

- 8 -

JP3

Signal Name

Function

DIO0

Programmable Input/Output

DIO1

Programmable Input/Output

DIO2

Programmable Input/Output

DIO3

Programmable Input/Output

Reserved

N/A

Reserved

N/A

SW Reset

Reset To Factory Default

GND

Circuit Ground

Ready LED

System is Ready

VCC

Power Supply

E3 Series

The bottom view of the MiiNePort E3 Series Module

Ethernet Pins (JP2)

Signal Name

Function

Reserve

N/A

Reserve

N/A

Reserve

N/A

Reserve

N/A

PoE signal pair 1

PoE power from Tx signal

PoE spare pair 1

PoE power from RJ45 4, 5 pin

PoE signal pair 2

PoE power from Rx signal

PoE spare pair 2

PoE power from RJ45 7, 7 pin

Serial Pins and Power Pins (JP4)

Signal Name

Function

Serial Rx

Receive Serial Data

Ready LED

System is Ready

Serial Tx

Transmit Serial Data

GPIO

Programmable I/O, DIO0

DCD

Receive Line Signal Detector

GPIO

Programmable I/O, DIO2

RS485_EN0

RS-485 Enabled

GPIO

Programmable I/O, DIO3

RTS

Request to Send

GPIO

Programmable I/O, DIO1

DTR

Data Terminal Ready

Reserve

N/A

- 9 -

Signal Name

Function

DSR

Data Set Ready

Reserve

N/A

CTS

Clear to Send

SW_Reset

Reset to Factory Default

Reserve

N/A

Reserve

N/A

GND

Circuit Ground

VCC

Power Supply

Ethernet Port Pins

RJ45

Signal

Tx+

Tx-

Rx+

Rx-

Evaluation Board Serial Port

DB9 Male

RS-232

RS-485-2W

DCD

–

RxD

–

TxD

D+

DTR

D-

GND

DSR

–

RTS

–

CTS

–

Certification

This product complies with Chinese RoHS (Restriction of

Hazardous Substances) regulations for Electronic

Information Products.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Steuereinheit Handbücher

Moxa Technologies

Moxa Technologies NE-4100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK-3252A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EOM-104 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E2-H Bedienungsanleitung

Moxa Technologies

Moxa Technologies Industio CI-134 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CA-132 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1261W-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Z2150 Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2400 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CA Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies WE-2100T Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CA Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPN005 Bedienungsanleitung

Moxa Technologies

Moxa Technologies PWR-190-AC/DC Bedienungsanleitung

Moxa Technologies

Moxa Technologies ABC-01 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPA003 Bedienungsanleitung

Moxa Technologies

Moxa Technologies PT-G503-PHR-PTP-HV Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-IRIGB-4DIO-PCI104-EMC4 Bedienungsanleitung

Moxa Technologies

Moxa Technologies CA-134I Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioThinx 4500 45ML-5401 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung