Moxa Technologies IA260 series Gebrauchsanweisung

IA260 Hardware User’s Manual

First Edition, September 2008

www.moxa.com/product

Reproduction without permission is prohibited.

IA260 Hardware User’s Manual

Any software described in this manual is furnished under a license agreement and may be used only in

accordance with the terms of that agreement.

Reproduction without permission is prohibited.

Trademarks

MOXA is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the

part of Moxa.

Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but

not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this

manual, or to the products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no

responsibility for its use, or for any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the

publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll-free: 1-888-669-2872

Tel: +1-714-528-6777

Fax: +1-714-528-6778

Moxa China (Shanghai office):

Toll-free: 800-820-5036

Tel: +86-21-5258-9955

Fax: +86-10-6872-3958

Moxa Europe:

Tel: +49-89-3 70 03 99-0

Fax: +49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel: +886-2-8919-1230

Fax: +886-2-8919-1231

Table of Contents

Chapter 1 Introduction..................................................................................................1-1

Overview.................................................................................................................................. 1-2

Model Descriptions and Package Checklist............................................................................. 1-2

Product Features ...................................................................................................................... 1-3

Product Hardware Specifications............................................................................................. 1-3

Hardware Block Diagram........................................................................................................ 1-5

Chapter 2 Hardware Introduction.................................................................................2-1

Appearance .............................................................................................................................. 2-2

Dimensions .............................................................................................................................. 2-3

LED Indicators......................................................................................................................... 2-4

Reset Button............................................................................................................................. 2-4

Real Time Clock ...................................................................................................................... 2-5

Placement Options................................................................................................................... 2-5

DIN-Rail Mounting.................................................................................................... 2-5

Wall Mounting (optional)........................................................................................... 2-6

Chapter 3 Hardware Connection Description .............................................................3-1

Wiring Requirements............................................................................................................... 3-2

Connecting the Power ................................................................................................ 3-2

Grounding the Unit..................................................................................................... 3-3

Connecting to the Console Port ............................................................................................... 3-3

Connecting to a Display........................................................................................................... 3-4

Connecting to a Keyboard and Mouse..................................................................................... 3-4

Connecting to the Network...................................................................................................... 3-4

Connecting to a Serial Device.................................................................................................. 3-5

Connecting to the DI/DO......................................................................................................... 3-5

Digital Input Wiring................................................................................................... 3-6

Digital Output Wiring ................................................................................................ 3-6

Insert CompactFlash Card........................................................................................................ 3-6

USB Hosts ............................................................................................................................... 3-8

Appendix A Regulatory Approval Statements ..............................................................A-1

Chapter 1 Introduction

Thank you for purchasing the Moxa IA260 RISC-based industrial ready-to-run embedded

computer. This computer features 4 RS-232/422/485 serial ports, dual 10/100 Mbps Ethernet ports,

8 digital input and 8 digital output channels, a VGA output, a CompactFlash socket for adding

additional storage space, and USB ports for a keyboard/mouse connection or for adding additional

storage space. These features make the IA260 series ideal for your industrial embedded

applications, such as SCADA, manufacturing automation, and other industrial applications.

This manual introduces the IA260’s hardware. After a brief introduction of the hardware features,

the manual focuses on installation and configuration.

The following topics are covered in this chapter:

Overview

Model Descriptions and Package Checklist

Product Features

Cirrus Logic EP9315 ARM9 CPU, 200 MHz

¾128 MB RAM on-board, 32 MB Flash Disk

¾VGA interface for field site monitoring

¾4 RS-232/422/485 serial ports

¾Dual 10/100 Mbps Ethernet ports for network redundancy

¾8+8 DI/DO channels

¾12 to 48VDC power input design

¾Supports CF socket and USB 2.0 Host

¾Ready-to-Run WinCE 6.0 platform

¾-40 to 75°C wide temperature model available

Product Hardware Specifications

Hardware Block Diagram

IA260 Hardware User’s Manual Overview

Overview

The IA260 embedded computers feature 4 RS-232/422/485 serial ports, dual Ethernet ports, 8

digital input channels, 8 digital output channels, VGA output, 2 USB hosts and a CompactFlash

socket in a compact, industrial-strength aluminum rugged casing. The DIN-Rail vertical form

factor makes the IA260 a cost effective solution for installation in small cabinets. This

space-saving solution also makes wiring easy, and is the best front-end embedded controller for

industrial applications.

Because of its VGA output capability, the IA260 can be used for protocol conversion or data

acquisition for field site devices, and is also suitable for SCADA systems in industrial applications,

such as manufacturing automation, production line process monitoring, and mining automation. It

can serve as an operator interface terminal at a field site by connecting a VGA monitor and

appropriate HMI software.

The IA260 comes with RS-232/422/485 ports, digital inputs and outputs, and dual LAN ports,

making it an ideal communication platform for redundant network applications.

In addition to the standard model, the IA260 also comes in a wide temperature model. The

IA260-T has an operating temperature range of -40 to 75°C, making it suitable for harsh industrial

automation environments. The IA260’s industrial design provides robust and reliable computing,

and the RISC-based architecture allows the IA260 to operate without generating too much heat.

The high communication performance and fan-less design make the IA260 ideal for industrial

automation environments.

The IA260 embedded computer uses a Cirrus Logic EP9315 ARM9, 32-bit, 200 MHz RISC CPU.

Unlike the X86 CPU, which uses a CISC design, the RISC design architecture and modern

semiconductor technology provide the IA260 with a powerful computing engine and

communication functions, but without generating a lot of heat. The built-in 32 MB NOR Flash

ROM and 128 MB SDRAM give you enough memory to run your application software directly on

the IA260.

The IA260 comes with the Windows CE 6.0 operating system pre-installed. WinCE 6.0 supports

general Windows and .NET CF 2.0 environments. This means that programs developed with

standard programming tools such as Embedded Visual C++ or Visual Studio 2005 in Windows PC

environments can operate on the IA260 without too much porting effort.

Model Descriptions and Package Checklist

Two models of the IA260 are available:

IA260-CE

RISC-based embedded computer with VGA, 4 serial ports, dual LANs, DIO, CompactFlash, USB,

WinCE 6.0

IA260-T-CE

RISC-based embedded computer with VGA, 4 serial ports, dual LANs, DIO, CompactFlash, USB,

WinCE 6.0, wide operating temperature

Both models are shipped with the following items:

y1 IA260 Embedded Computer

yWall-Mounting Kit

yDIN-Rail Mounting Kit (attach to the product’s casing)

yQuick Installation Guide

yDocument & Software CD

yCross-over Ethernet cable

1-2

IA260 Hardware User’s Manual Overview

yCBL-4PINDB9F-150: 150 cm, 4-pin header to DB9 female console port cable

yUniversal Power Adaptor (includes terminal block to power jack converter)

yProduct Warranty Statement

NOTE: Notify your sales representative if any of the above items are missing or damaged.

Product Features

yCirrus Logic EP9315 ARM9 CPU, 200 MHz

y128 MB RAM on-board, 32 MB Flash Disk

yVGA interface for field site monitoring

y4 RS-232/422/485 serial ports

yDual 10/100 Mbps Ethernet ports for network redundancy

y8+8 DI/DO channels

y12 to 48VDC power input design

ySupports CF socket and USB 2.0 Host

yReady-to-Run WinCE 6.0 platform

y-40 to 75°C wide temperature model available

Product Hardware Specifications

Computer

CPU Cirrus Logic EP9315 ARM9 CPU, 200 MHz

DRAM 128 MB onboard (optional 256 MB)

Flash 32 MB onboard (optional 64 MB)

Storage Expansion CompactFlash socket

USB USB Host x 2 compliant to USB 2.0 (OHCI), Type A connector

Reset Button Supports “Reset to Factory Default”

OS (pre-installed) WinCE 6.0

LAN Interface

Ethernet Auto-sensing 10/100 Mbps x 2, RJ45 connectors

Magnetic Isolation

Protection 1.5 KV built-in

Serial Interface

Number of Ports 4

Serial Standards RS-232/422/485, software-selectable

Connectors DB9 male

Console/Debugging Port RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)

Serial Communication Parameters

Data Bits 5, 6, 7, 8

Stop Bits 1, 1.5, 2

Parity None, Even, Odd, Space, Mark

Flow Control RTS/CTS, XON/XOFF, ADDC™ (automatic data direction control)

for RS-485

Baudrate 50 bps to 921.6 Kbps (supports non-standard baudrates; see user’s

manual for details)

1-3

IA260 Hardware User’s Manual Overview

Serial Signals RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND

RS-422: TxD+, TxD-, RxD+, RxD-, GND

RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND

RS-485-2w: Data+, Data-, GND

Digital Input

Input Channels 8, source type

Input Voltage 0-30 VDC at 5 KHz

Digital input levels Dry contact:

Logic level 0: Close to GND

Logic level 1: Open

Wet contact:

Logic level 0: +3V max

Logic level 1: +10V ~ +30V (COM to DI)

Connector Type 10-pin screw terminal block (8 points / COM / GND)

Digital Output

Output Channels 8, sink type

On-state Voltage 24 VDC nominal, open collector to 30 V

Connector Type 9-pin screw terminal block (8 points, GND)

Display

Graphics Controller EP9315 internal graphics accelerator engine with TTL graphical

signal support

Display Memory Dynamic video memory (shares system memory)

Graphics Resolution 1024 x 768, 8 bits

Display Interface CRT interface for VGA output, DB15 female connector

LEDs

System Power x 1, Ready x 1, Storage x 1

LAN 10M/Link x 2, 100M/Link x 2 (on connector)

Serial TxD x 4, RxD x 4

Physical Characteristics

Dimensions (W x D x H) 52 x 112.6 x 162 mm (2.05 x 4.43 x 6.38 in)

Gross Weight 1 kg

Housing Aluminum, industrial vertical form factor

Mounting DIN-Rail, wall

Environmental Limits

Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Operating Humidity 5 to 95% RH

Storage Temperature Standard Models: -20 to 80°C (-4 to 176°F)

Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Power Requirements

Input Voltage 12 to 48 VDC (3-pin terminal block)

Power Consumption 480 mA @ 12 VDC (with no load on USB ports)

900 mA @ 12 VDC (with load on 2 USB ports)

1-4

IA260 Hardware User’s Manual Overview

Regulatory Approvals

EMC CE (EN55022 Class A, EN61000-3-2 Class A, EN61000-3-3,

EN55024), FCC (Part 15 Subpart B, CISPR 22 Class A), CCC

(GB9254, GB 17625.1)

Safety UL/cUL (UL60950-1, CSA C22.2 No. 60950-1-03), LVD

(EN60950-1), CCC (GB4943)

Automatic Reboot

Trigger Built-in WDT (watchdog timer)

Warranty 5 years

Please note that the Hardware Specifications apply to the embedded computer unit itself, but not to

accessories. In particular, the wide temperature specification does not apply to accessories such as

the power adaptor and cables.

Hardware Block Diagram

Cirrus Logic EP9315

32-bit ARM9 200 MHz

128MB

RAM

32MB

Flash

Power

Circuit

RTC

Watchdog

LAN

MAC

PHY

Ethernet x 2

LAN

Function

RS-232/422/485 x 4

LAN

Controller

PHY

VGA

USB 2.0

Host x 2

RS-232

UART

Console

Port

DIx8 DOx8

MOXA

UART

ASIC

MOXA

UART

ASIC

MOXA

UART

ASIC

MOXA

UART

ASIC

Serial

Port 1 Serial

Port 2 Serial

Port 3 Serial

Port 4

1-5

Chapter 2 Hardware Introduction

The IA260 embedded computers are compact and rugged, making them suitable for industrial

applications. The LED indicators allow users to monitor performance and identify trouble spots

quickly, and the multiple ports can be used to connect a variety of devices. The IA260 comes with

a reliable and stable hardware platform that lets you devote the bulk of your time to application

development. In this chapter, we provide basic information about the embedded computer’s

hardware and its various components.

In this chapter, we cover the following topics:

Appearance

Dimensions

LED Indicators

Reset Button

Real Time Clock

Placement Options

¾DIN-Rail Mounting

¾Wall Mounting (optional)

IA260 Hardware User’s Manual Hardware Introduction

Appearance

Top View

DI x 8 DO x 8

Power Input (12 to 48 VDC)

Reset

Front View

LED Indicators

10/100 Mbps

Ethernet x 2

CompactFlash

Socket

Power, Ready, Storage

Serial, Tx/Rx

LED Indicators

VGA Output

RS-232/422/485

Serial Port x 4

USB 2.0 Host x 2

Serial, Tx/Rx

LED Indicators

2-2

Andere Handbücher für IA260 series

Inhaltsverzeichnis

Andere Moxa Technologies Desktop Handbücher

Moxa Technologies

Moxa Technologies MC-3201 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies UC-7400-CE Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2406-24I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2616A Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies EXPC-1519 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7122 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-710 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MC-5157-AC/DC Bedienungsanleitung

Moxa Technologies

Moxa Technologies V3200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8410A Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies MC-5157-AC Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies BXP-C100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2403C Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies THINKCORE W311 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7112 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies V3200 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies UC-8580-LX Bedienungsanleitung

Moxa Technologies

Moxa Technologies THINKCORE W311 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies DA-820C Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ThinkCore V481 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DRP Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MC-5150-DC Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7408 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies W406 Series Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

HP Z1 Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung