Moxa Technologies AirWorks AWK-5222 Bedienungsanleitung

Moxa AirWorks AWK-5222

User’s Manual

First Edition, June 2009

www.moxa.com/product

Reproduction without permission is prohibited.

Moxa AirWorks AWK-5222

User’s Manual

The Moxa software described in this manual is furnished under a license agreement and may be used only in

accordance with the terms of that agreement.

Reproduction without permission is prohibited.

Trademarks

MOXA is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the

part of Moxa.

Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but

not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this

manual, or to the products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no

responsibility for its use, or for any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the

publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll-free: 1-888-669-2872

Tel: +1-714-528-6777

Fax: +1-714-528-6778

Moxa China (Shanghai office):

Toll-free: 800-820-5036

Tel: +86-21-5258-9955

Fax: +86-10-6872-3958

Moxa Europe:

Tel: +49-89-3 70 03 99-0

Fax: +49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel: +886-2-8919-1230

Fax: +886-2-8919-1231

Table of Contents

Chapter 1 Introduction..................................................................................................1-1

Overview.................................................................................................................................. 1-2

Package Checklist.................................................................................................................... 1-2

Product Features ...................................................................................................................... 1-2

Product Specifications ............................................................................................................. 1-3

Functional Design.................................................................................................................... 1-5

LED Indicators ............................................................................................................. 1-5

Beeper........................................................................................................................... 1-6

Reset Button ................................................................................................................. 1-6

Relay (Digital Output).................................................................................................. 1-7

Antenna.........................................................................................................................1-8

Chapter 2 Getting Started.............................................................................................2-1

First-time Installation and Configuration................................................................................. 2-2

Communication Testing...........................................................................................................2-3

Function Guiding Map............................................................................................................. 2-4

Chapter 3 Web Console Configuration........................................................................3-1

Configuration by Web Browser ............................................................................................... 3-2

Overview.................................................................................................................................. 3-4

Basic Settings........................................................................................................................... 3-4

System Info Settings..................................................................................................... 3-4

Network Settings .......................................................................................................... 3-5

Time Settings................................................................................................................ 3-6

Wireless Settings...................................................................................................................... 3-8

Operation Mode............................................................................................................ 3-8

WLAN1/WLAN2....................................................................................................... 3-10

WLAN Security Settings............................................................................................ 3-12

Advanced Wireless Settings ....................................................................................... 3-22

WLAN Certification Settings (for EAP-TLS in Redundant Client, Client or Slave

mode only)................................................................................................................. 3-25

Advanced Settings ................................................................................................................. 3-26

DHCP Server (for AP mode only)............................................................................. 3-26

Packet Filters .............................................................................................................. 3-28

RSTP Settings (for Redundant AP or AP mode only)............................................ 3-31

SNMP Agent .............................................................................................................. 3-33

Storm Protection......................................................................................................... 3-35

Auto Warning Settings...........................................................................................................3-36

System Log................................................................................................................. 3-36

Syslog......................................................................................................................... 3-38

E-mail......................................................................................................................... 3-39

Relay...........................................................................................................................3-41

Trap ............................................................................................................................3-42

Status...................................................................................................................................... 3-44

Wireless Status ........................................................................................................... 3-44

Associated Client List (for Redundant AP, AP, or Master mode only)...................... 3-45

DHCP Client List (for AP mode only) ....................................................................... 3-45

System Log................................................................................................................. 3-46

Relay Status................................................................................................................ 3-46

DI and Power Status ................................................................................................... 3-47

Maintenance........................................................................................................................... 3-47

Console Settings......................................................................................................... 3-47

Ping............................................................................................................................. 3-47

Firmware Upgrade...................................................................................................... 3-48

Config Import Export ................................................................................................. 3-49

Load Factory Default.................................................................................................. 3-49

Password..................................................................................................................... 3-49

Misc. Settings ............................................................................................................. 3-50

Save Configuration ................................................................................................................ 3-50

Restart.................................................................................................................................... 3-51

Logout.................................................................................................................................... 3-51

Chapter 4 Other Console Configurations....................................................................4-1

RS-232 Console Configuration (115200, None, 8, 1, VT100)................................................. 4-2

Configuration by Telnet and SSH Consoles............................................................................. 4-4

Configuration by Web Browser with HTTPS/SSL .................................................................. 4-5

Disabling Telnet and Browser Access...................................................................................... 4-6

Chapter 5 References....................................................................................................5-1

Beacon ..................................................................................................................................... 5-2

DTIM....................................................................................................................................... 5-2

Fragment.................................................................................................................................. 5-2

RTS Threshold......................................................................................................................... 5-2

STP and RSTP ......................................................................................................................... 5-2

The STP/RSTP Concept............................................................................................... 5-2

Differences between RSTP and STP............................................................................ 5-3

Chapter 6 Supporting Information...............................................................................6-1

About This User’s Manual....................................................................................................... 6-2

DoC (Declaration of Conformity)............................................................................................ 6-3

Federal Communication Commission Interference Statement ..................................... 6-3

R&TTE Compliance Statement.................................................................................... 6-4

Firmware Recovery.................................................................................................................. 6-4

Technical Support Contact Information................................................................................... 6-6

Chapter 1 Introduction

Moxa AirWorks AWK-5222 with dual-RF wireless capability allows wireless users to access

network resources more reliably. The AWK-5222 is rated to operate at temperatures ranging from

0 to 60°C for standard models and -40 to 75°C for extended temperature models, and is rugged

enough for any harsh industrial environment.

In this chapter, we cover the following topics:

Overview

Package Checklist

Product Features

Product Specifications

Functional

¾LED Indicators

¾Beeper

¾Reset Button

¾Relay (Digital Output)

¾Antenna

AirWorks AWK-5222 User’s Manual Introduction

1-2

Overview

The AWK-5222 Access Point/Bridge and AP Client is ideal for applications that need a more

reliable solution, and are hard to wire, too expensive to wire, or use mobile equipment that

connects to a TCP/IP network. The AWK-5222 can operate at temperatures ranging from 0 to

60°C for standard models and -40 to 75°C for extended temperature models, and is rugged enough

for any harsh industrial environment. Installation is easy, with either DIN-Rail mounting or wall

mounting in distribution boxes. The DIN-rail/wall mounting ability, wide operating temperature

range, and IP30 housing with LED indicators make the AWK-5222 a convenient yet reliable

solution for any industrial wireless application.

Package Checklist

Moxa’s AWK-5222 is shipped with the following items. If any of these items is missing or

damaged, please contact your customer service representative for assistance.

y1 AWK-5222

y2 Swivel-type Antennas (2dBi, RP-SMA, 2.4&5GHz)

y1 Quick Installation Guide

y1 Software CD

y1 Moxa Product Warranty Booklet

y1 Cable Holder with a Screw

y2 Protective Caps

NOTE

The above items come with the AWK-5222 standard version. The package contents may vary in

different a customized version.

Product Features

yIEEE802.11a/b/g Compliant

yThree-in-one design (AP/Bridge/Client)

yDual-RF design for redundant wireless communication

yAdvanced Wireless Security:

¾64-bit and 128-bit WEP/WPA/WPA2

¾SSID Hiding/IEEE 802.1X/RADIUS

¾Packet access control & filtering

ySTP/RSTP support for redundancy of system networking

yLong-distance transmission support

yTurbo RoamingTM enables rapid handover (Client mode)

yDedicated antenna selection

yFree firmware update for more advanced functions

yRS-232 console management

y2DI+1DO for on-site monitoring and warming

AirWorks AWK-5222 User’s Manual Introduction

1-3

yOperating temperature ranges from -40 to 75°C (-T model)

yPower input by redundant 24 VDC power inputs or IEEE802.3af Power over Ethernet

yDIN-Rail or wall mounting ability

yIP30 protected high-strength metal housing

Product Specifications

WLAN

Standards IEEE 802.11a/g/b for Wireless LAN

IEEE 802.11i for Wireless Security

IEEE 802.3u for 10/100BaseT(X)

IEEE 802.3af for Power-over-Ethernet

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid STP

Spread Spectrum and

Modulation DSSS with DBPSK, DQPSK, CCK

OFDM with BPSK, QPSK, 16QAM, 64QAM

Operating Channels

(Central Frequency) US: 2.412 to 2.462 GHz (11 channels)

5.18 to 5.24 GHz (4 channels)

EU: 2.412 to 2.472 GHz (13 channels)

5.18 to 5.24 GHz (4 channels)

JP: 2.412 to 2.472 GHz (13 channels, OFDM)

2.412 to 2.484 GHz (14 channels, DSSS)

5.18 to 5.24 GHz (4 channels for W52)

Security 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal or

Enterprise (IEEE 802.1X/ RADIUS, TKIP and AES)

Protocol

General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP,

RADIUS, SNMP, RTP ,PPPoE, DHCP

AP-only Protocols: ARP, BOOTP, DHCP, dynamic VLAN-Tags for 802.1X-Clients,

STP/RSTP (IEEE 802.1D/w)

Data Rates 802.11b: 1, 2, 5.5, 11 Mbps

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps

Transmit Power 802.11b: 1 to 11 Mbps: Typ. 18±1.5 dBm

802.11g: 6 to 24 Mbps: Typ. 18±1.5 dBm

36 to 48 Mbps: Typ. 16±1.5 dBm

54 Mbps: Typ. 15±1.5 dBm

802.11a: 6 to 24 Mbps: Typ. 16±1.5 dBm

36 to 48 Mbps: Typ. 14±1.5 dBm

54 Mbps: Typ. 13±1.5 dBm

Receiver Sensitivity 802.11b: -92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps,

-88 dBm @ 5.5 Mbps, -84dBm @ 11 Mbps

802.11g: -87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps,

-85 dBm @ 12 Mbps, -82dBm @ 18 Mbps,

-80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps,

-72dBm @ 48 Mbps, -70 dBm @ 54 Mbps

802.11a: -87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps,

-85 dBm @ 12 Mbps, -82dBm @ 18 Mbps,

-80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps,

-72dBm @ 48 Mbps, -70 dBm @ 54 Mbps

AirWorks AWK-5222 User’s Manual Introduction

1-4

Interface

Default Antenna 2dBi dual-band, Omni-directional antenna

Antenna Connector RP-SMA (male)

Connection 10-pin Removable Terminal Block

Alarm Contact 1 relay output (capacity: 1A @24VDC)

Digital Input 2 electrically-isolated inputs

‧+3 to -30V for state “0” (OFF)

‧13 to 30V for state “1” (ON)

‧Max. input current: 8 mA

Console RS-232 (RJ45 type)

LAN Port 10/100BaseT(X) auto negotiation speed

LED Indicators PWR1, PWR2, PoE, FAULT, STATE, Signal Strength, CLIENT

MODE, BRIDGE MODE, WLAN, 10M, 100M

Power

Input Voltage 12 to 48 VDC, redundant dual DC power inputs or 48 VDC

Power-over-Ethernet (IEEE 802.3af)

Input Current 0.494 to 0.121 A (@ 12 to 48 VDC)

Input Current (@ 24VDC) 0.3 A

Overload Current Protection 1.6 A

Reverse Polarity Protection Present

Mechanical

Dimensions 62.05 x 135 x 105 mm (2.44 x 5.31 x 4.13 in)

Weight 880 g

Installation DIN-rail, or Wall Mounting (with optional wall mounting kit)

Casing IP30 protection, aluminum case

Environment

Operating Temperature: Standard models: 0 to 60°C (32 to 140°F)

Wide Temp Models: -40 to 75°C (-40 to 167°F)

Storage Temperature: -40 to 85ºC (-40 to 185ºF)

Ambient Relative Humidity 5 to 95% (non-condensing)

Regulatory Approvals*

Safety: EN60950-1, UL60950-1

EMC: EN301 489-1/-17, FCC Part 15, EN55022/55024, IEC61000-6-2/-4

Environmental/EMC

compliancy EN50155, EN50121-1/-4

*Please check Moxa’s website for the most up-to-date certification status.

Warranty 5 years

Details: See http://

www.moxa.com/warranty

ATTENTION

The AWK-5222 is NOT a portable mobile device and should be located at least 20cm away from

the human body. TheAWK-5222 is NOT designed for the general public. To deploy AWK-5222s

and establish a wireless network safely, a well-trained technician is required for installation.

800mA (@ 12 to 48 VDC)

AirWorks AWK-5222 User’s Manual Introduction

1-5

Functional Design

LED Indicators

The LEDs on the front panel of AWK-5222 allow you to identity the status and wireless settings

quickly.

LED Color State Description

Front Panel LED Indicators (System)

On Power is being supplied from power input 1.

PWR1 Green Off Power is not being supplied from power input

On Power is being supplied from power input 2.

PWR2 Green Off Power is not being supplied from power input

On Power is being supplied via PoE.

PoE Amber Off Power is not being supplied via PoE.

On Relay is on.

Quick Blinking Cannot get an IP address from the DHCP

server (interval: 1 sec)

Slow Blinking IP address conflict (interval: 0.5 sec)

FAULT Red

Off Relay is off.

Green Software Ready

Blinking Green The AWK has been located by AWK Search

Utility (interval: 1sec)

STATE Green/Red

Red Booting or Error condition

Green On WLAN1 functions in Client mode.

Blinking Green WLAN1’s data communication is running in

Client mode

(interval: 1 sec)

Amber On WLAN1 functions in AP/Bridge mode.

Blinking

Amber

WLAN1’s data communication is running in

AP/Bridge mode

(interval: 1 sec)

WLAN1 Green/Amber

Off WLAN1 is not in use.

Green On WLAN2 function is in Client mode.

Blinking Green WLAN2’s data communication is running in

Client mode

(interval: 1 sec)

Amber On WLAN2 function is in AP/Bridge mode.

Blinking

Amber

WLAN2’s data communication is running in

AP/Bridge mode

(interval: 1 sec)

WLAN2 Green/Amber

Off WLAN2 is not in use.

TP Port (LAN1, LAN2) LED Indicators (Port Interface)

On TP port’s 10 Mbps link is active.

Blinking Data is being transmitted at 10 Mbps

10M Yellow Off TP port’s 10 Mbps link is inactive.

On TP port’s 100 Mbps link is active.

Blinking Data is being transmitted at 100 Mbps

100M Green Off TP port’s 100 Mbps link is inactive.

AirWorks AWK-5222 User’s Manual Introduction

1-6

ATTENTION

When the LEDs for STATE (Green), FAULT, WLAN1 and WLAN2 all light up simultaneously

and blink at one-second intervals, it means the system failed to boot. This may be due to improper

operation or uncontrollable issues, such as an unexpected shutdown during firmware update. To

recover the firmware, refer to “Firmware Recovery” in Chapter 6.

Beeper

The beeper signals that the system is ready with two short beeps.

Reset Button

The RESET button is located on the top panel of the AWK-5222. You can reboot the AWK-5222

or reset it to factory default settings by pressing the RESET button with a pointed object such as

an unfolded paper clip.

ySystem reboot: Hold the RESET button down for under 5 seconds and then release.

yReset to factory default: Hold the RESET button down for over 5 seconds until the STATE

LED starts blinking green. Release the button to reset the AWK-5222.

AUX1 AUX2

RESET button

Andere Handbücher für AirWorks AWK-5222

Inhaltsverzeichnis

Andere Moxa Technologies Netzwerk-Hardware Handbücher

Moxa Technologies

Moxa Technologies airworks awk-5232 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Airworks AWK-3131A-M12-RCC Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7110 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MAR-2000 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NE-4100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies RNAS-1200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TAP-125 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MRC-1002 Series Kurzanleitung

Moxa Technologies

Moxa Technologies UC-7420/7410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EOM-G103-PHR-PTP Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TRC-2190 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E3 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5110 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA 5250 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioMirror E3210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NE-4000T Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ThinkCore DA-660-8-CE Bedienungsanleitung

Moxa Technologies

Moxa Technologies V91 Guide Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-661-CE Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5610-8 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung