Moxa Technologies CN2610-8 Bedienungsanleitung

– 1 – – 2 – – 3 –

P/N: 1802026000214

CN2600 Series

Quick Installation Guide

Fourth Edition, September 2014

Overview

The Moxa CN2600 dual-LAN terminal servers have 8 or 16 RS-232

or RS-232/422/485 ports and dual 10/100 Mbps Ethernet LAN

ports, and some models come with dual AC power inputs. The

CN2600 terminal servers are used to connect terminals, modems,

printers, and other serial devices to LAN hosts, and all models

comply with TCP/IP and IEEE 802.3 specifications using standard

twisted pair 10/100BaseTX cable as the transmission medium.

CN2600 Series Models

The CN2600 Series includes the following models: CN2610-8,

CN2610-8-2AC, CN2610-16, CN2610-16-2AC, CN2650-8,

CN2650-8-2AC-T, CN2650-8-2AC, CN2650-16, CN2650-16-2AC-T,

CN2650-16-2AC, CN2650I-8, CN2650I-8-2AC, CN2650I-16,

CN2650I-16-2AC, CN2650I-8-HV-T, CN2650I-16-HV-T.

Package Checklist

The CN2600 dual-LAN terminal server products are shipped with

the following items:

•1 CN2600 series terminal server

•Power cord (AC models only)*

•1 DB9 serial cable (CBL-RJ45F9-150)

•1 DB25 serial cable (CBL-RJ45M25-150)

•Rackmount kit (includes 2 brackets and 8 screws)

•Quick installation guide (this guide)

•Documentation and software CD-ROM

* Power cords are available with US, Euro, UK, and JP plugs.

Hardware Introduction

NOTE

The wide temperature models do not come with the LCM

display panel and push buttons. The LCM description below

applies only to standard temperature models.

Front Panel

LED Color

Description

Reset None

Press the Reset button for 5 seconds to load

factory defaults. The CN2600 will beep twice

when the configuration has been reset.

Ready Red

Used for configuring the IP address and other

parameters.

Green

Lights up when the CN2600 system is ready.

Serial Tx

Green

Flashes to indicate serial port transmission.

Serial Rx

Yellow

Flashes to indicate serial port reception.

Rear Panel

LCM Display

If the CN2600 is working properly, the LCM panel will display a

green color. The red Ready LED will also light up, indicating that

the CN2600 is receiving power. After the red Ready LED turns to

green, you will see a display similar to the following: (Example)

CN2610-16:

The CN2610’s name

03:

The CN2610’s local sequence number

192.168.127.254:

The CN2610’s IP address

There are four push buttons on the CN2600 nameplate:

Button

Name

Action

MENU menu Activates the main menu, or returns to an

upper level.

cursor

Scrolls up through a list of items shown on the

LCM panel’s second line.

down

cursor

Scrolls down through a list of items shown on

the LCM panel’s second line.

SEL select

Selects the option listed on the LCM panel’s

second line.

Use the buttons to access the CN2600’s function menus. As you

move through the functions and settings, the top line shows the

current menu or submenu name, and the bottom line shows the

submenu name or menu item. Press the SEL button to access the

item displayed on the bottom line.

Refer to CN2600 series User’s Manual for more details.

Hardware Installation

Installing the CN2600

Open the package and attach the CN2600 to a desktop, or fasten it

to the rack cabinet.

Wiring Requirements

1. Use separate paths to route wiring for power and devices. If

power wiring and device wiring paths must cross, make sure

the wires are perpendicular at the intersection point.

2. NOTE: Do not run signal or communication wiring and power

wiring in the same wire conduit. To avoid interference, wires

with different signal characteristics should be routed

separately.

3. Where necessary, we strongly advise labeling wiring to all

devices in the system.

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Connecting the Power

AC: Connect the CN2600 100-240 VAC power line with its AC

connector. If the power is properly supplied, the “Ready” LED will

show a solid red color until the system is ready, at which time the

“Ready” LED will change to a green color.

DC: Connect the NPort CN2650I-HV’s power cord to the DC

connector, and then follow the steps given below:

Take

the CN2650I-8-HV-

T as an example. Loosen

the screws on th

e V+ and V- terminals of the

CN2650I-8-HV-T terminal block. Connect the

power cord’s 100 VDC wire to the terminal block’s V+ terminal, and

the power cord’s DC

Power Ground wire to the terminal block’s V-

terminal, and then tighten the terminal block screws. (Note: The

CN2650I

-8-HV-T can still operate even if the DC Power Ground

wires

are reversed.) The “Ready” LED will show a solid red color

until the system is ready,

at which time it will change to a green

color.

Grounding the CN2650I-HV:

Grounding and wire routing help limit the effects

of noise due to electromagnetic interference

(EMI). Run the ground connection from the

ground screw to the grounding surface prior t

connecting devices. The Shielded Ground

(sometimes

called Protected Ground) contact is the second contact

from the right of the 5

pin power terminal block connector located

on the rear panel of the CN2650I

-8-HV-

T. Connect the SG wire to

the Earth ground.

Connecting to the Network

Use an Ethernet cable to connect the CN2600 to the Ethernet

network. There are 2 LED indicators located on the top left and

right corners of the Ethernet connector. If the cable is properly

connected, the CN2600 will indicate a valid connection to the

Ethernet in the following ways:

The top right corner LED indicator maintains a solid

green color when the cable is properly connected to a

100 Mbps Ethernet network.

The top left corner LED indicator maintains a solid

orange color when the cable is properly connected to a

10 Mbps Ethernet network.

Connecting to a Serial Device

Connect the serial data cable between the CN2600 and the serial

device.

Connecting to a Console

A console is a combination of keyboard and monitor, and is used to

configure settings and to monitor the status of your system. If you

do not have a network environment, use a terminal, a PC running

UNIX, or a PC with terminal emulation software (e.g.,

HyperTerminal in Windows; PComm by Moxa). Use an

RJ45-to-DB25 or RJ45-to-DB9 cable to connect the terminal to the

console socket. Refer to the CN2600 User’s Manual for more

details.

Software Installation

Entering the Console Utility

The Console Utility is the main application needed to set up the

server/port configuration, and to execute utilities such as ping,

diagnosis, monitor, and upgrade. There are two ways to enter the

Console Utility. One is to use terminal emulation through a console

terminal, and the other is to telnet from a network terminal.

Refer to the CN2600 User’s Manual for more details.

Pin Assignments and Cable Wiring

10/100BaseTX Port Pinouts

Console Port Pinouts

Signal

Tx+

Tx-

Rx+

Rx-

RS-232

DSR (in)

RTS (out)

GND

TxD (out)

RxD (in)

DCD (in)

CTS (in)

DTR (out)

RJ45 RS

-232/422/485 Port

Pin RS-232

RS-422/

RS-485-4w

RS-485-2w

DSR (in)

–

RTS (out)

TxD+

–

GND

TxD (out)

TxD-

–

RxD (in)

RxD+

Data+

DCD (in)

RxD-

Data-

CTS (in)

–

DTR (out)

–

DB9 (

male) RS-232/422/485 Port

Pin RS-232

RS-422/

RS-485-4w

RS-485-2w

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies NPort Express DE-211 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000A-I/O series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2610 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IAW5000A- I/O Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E1-SDK Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2250A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2610 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6250 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort P5250A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2250A-T-EU Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6450 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5150AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150AI Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung