Moxa Technologies NPort 6650 Bedienungsanleitung

– 1 – – 2 – – 3 –

P/N: 1802066500015

*1802066500015*

NPort 6600 Series

Quick Installation Guide

Sixth Edition, August 2015

Overview

The NPort 6600 series of serial device servers includes 8-port,

16-port, and 32-port models for connecting larger numbers of

serial devices to Ethernet. Some applications now also require

better security when transmitting data through a network. The

NPort 6600 series of device servers use DES, 3DES, and AES data

encryption to provide secure network communication.

Package Checklist

Before Installing your NPort 6600 series secure device server,

verify that the package contains the following items:

•1 NPort 6600 device server

•CBL-RJ45M9-150: 8-pin RJ45 to DB9 male connection cable,

150 cm

•Power Cord (AC models only)

•2 rack-mount ears

•Documentation and software CD

•Quick installation guide (printed)

•Warranty card

Optional Accessories

•DK-35A: 35 mm DIN-Rail Mounting Kit

•DIN-Rail Power Supply

•NM-TX01/NM-TX01-T: Network module with one

10/100BaseTX Ethernet port (RJ45 connector; supports

cascade redundancy)

•NM-FX01-S-SC/NM-FX01-S-SC-T: Network module with one

100BaseFX single mode fiber port (SC connector; supports

cascade redundancy)

•NM-FX02-S-SC/NM-FX02-S-SC-T: Network module with two

100BaseFX single mode fiber ports (SC connectors; supports

cascade redundancy)

•NM-FX01-M-SC/NM-FX01-M-SC-T: Network module with one

100BaseFX multi mode fiber port (SC connector; supports

cascade redundancy)

•NM-FX02-M-SC/NM-FX02-M-SC-T: Network module with two

100BaseFX multi mode fiber ports (SC connectors; supports

cascade redundancy)

NOTE: Please notify your sales representative if any of the above

items is missing or damaged.

Hardware Introduction

Demonstrated 8 port model to be an example.

Reset Button

Press the Reset button continuously for 5 sec to load factory

defaults: Use a pointed object to press the reset button. Release

the button after the Ready LED stops blinking.

RS-485 adjustable pull high/low resistor (150/1 kO)

The NPort 6650 has 3 DIP Switches associated with each serial port

for configuring the pull high/low resistors for RS-485 applications.

The switches are located in a recess on the bottom of the NPort

6650. To access the switches, first remove the panel covering the

recess.

Pull High

Pull Low

Terminator

1 KΩ

120 KΩ

OFF

150 KΩ

–

NOTE: For RS-232 applications, all DIP Switches for the port

should be set to the OFF position.

Rack Mounting

Use four screws to attach the NPort 6610/6650 to a standard rack

LED Indicators

Name

Color

Function

PWR

Red

Power is being supplied to the power input.

Ready

Red

Steady

on:

Power is on and the NPort 6600

series is booting up.

Blinking:

IP conflict, DHCP or BOOTP server

not responding, or relay output.

Check relay output first. If still

blinking, then there is an IP

conflict, or the DHCP or BOOTP

server did not respond properly.

Green

Steady

on:

Power is on and the NPort 6600

series is functioning normally.

Blinking:

The device server has been

located by the Administrator’s

Locator function.

Off Power is off, or power error condition exists.

Link Orange 10 Mbps Ethernet connection.

Green

100 Mbps Ethernet connection.

Off

Ethernet cable is disconnected, or has a

short.

P1-P16 Tx

Green

Serial port is transmitting data.

Off

No data is being transmitted through the

serial port

P1-P16 Rx

Orange

Serial port is receiving data..

Off

No data is being received through the serial

port.

Orange

Steady

on:

Ethernet fiber connection, but port

is idle.

Blinking:

Fiber port is transmitting or

receiving data.

P1-P16

in-use

LEDs

Green

Serial port is opened by server side

software.

Off

Serial port is not opened by server side

software.

Alarm

Red

The relay Dout is open (exception)

Off

The relay Dout is Shorted (normal)

Module

Green

Network module is plugged in and detected

Off

No module present

LCM Display Panel

The NPort 6600 display panel will show the model name, server

name, and IP address when powered up

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Operating the LCM Panel

There are four push buttons on the NPort 6600’s top panel for

operating the server’s LCM panel. The function of each button is

described below:

Button

Action

Activates the main menu, or returns to a lower level.

∧

Scrolls up through a list of items shown on the LCM panel’s

second line.

∨

Scrolls down through a list of items shown on the LCM

panel’s second line.

SEL

Selects the option listed on the LCM panel’s second line.

Detailed LCM panel operating instructions can be found on the

Document and Software CD in the “NPort 6600 Series User’s

Manual.”

Note: LCM display panel and push buttons only for standard

temprature model

Hardware Installation Procedure

STEP 1: Connect the NPort 6600 device server to a suitable power

source.

AC models: Connect the 100 to 240 VAC power cord to the NPort

6600’s power input.

DC models: Connect the terminal block to a battery.

STEP 2: Connect the NPort 6600 series to a network. Use a

standard straight-through Ethernet cable to connect to a hub or

switch. Use a cross-over Ethernet cable when connecting to your

computer’s Ethernet port (e.g., when setting up or testing the

NPort 6600 server).

STEP 3: Connect the NPort 6600’s serial ports to your serial

devices.

Software Installation Information

NPort Search Utility

To install the NPort Search Utility, insert the NPort Document and

Software CD into your computer’s CD-ROM drive. When the NPort

Installation CD window opens, click on the Installation button, and

then follow the instructions on the screen. To view detailed

information about the NPort Search Utility, refer to the pdf version

of the “NPort 6600 Series User’s Manual,” which is located in the

document directory of the CD.

PComm Lite and Console Port (19200, 8, None, 1)

MOXA’s PComm Lite software utility is also included in the

Document and Software CD of the CD-ROM. PComm Lite is often

used to connect to the NPort 6600 through its console port to

configure the IP address for the first time. Use the following serial

console parameters when connecting through the console port:

19200, 8, None, 1.

Pin Assignments and Cable Wiring

Pin Assignments (NPort 6610/6650)

RS-232

RS-422,

4-wire RS -485

2-wire RS-485

DSR

–

RTS

TxD+

–

GND

TxD

TxD-

–

RxD

RxD+

Data+

DCD

RxD-

Data-

CTS

–

DTR

–

Pin Mapping for RS-232 Cables (NPort 6610/6650)

NPort6610/6650

Serial Device

RJ45

DB9(M)

DB9(F)

DB25(M)

DB25(F)

DSR

DTR

RTS

CTS

GND

TxD

RxD

TxD

DCD

CTS

RTS

DTR

DSR

Pin Mapping for RS-422/4W-RS-485 Cables (NPort 6650)

NPort 6650

Serial Device

RJ45

DB9(M)

DB9(F)

DB25(M)

DB25(F)

TxD+

RxD+

GND

TxD-

RxD-

RxD+

TxD+

RxD-

TxD-

Pin Mapping for 2W-RS-485 Cables (NPort 6650)

NPort 6650

Serial Device

RJ45

DB9(M)

DB9(F)

DB25(M)

DB25(F)

GND

Data+

Data-

Specifications

LAN

Ethernet Ports

10/100 Mbps (RJ45)

Protection

Built-in 1.5 KV magnetic isolation

Serial Interface

NPort 6610

NPort 6650

8, 16, or 32 RS-232 ports (8-pin RJ45)

8, 16, or 32 RS-232/422/485 ports (8-pin RJ45)

Signals

RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD,

GND

RS-422: Tx+, Tx-, Rx+, Rx-, GND

RS-485(2W): Data+, Data-, GND

RS-485(4W): Tx+, Tx-, Rx+, Rx-, GND

RS-485 Data

Direction

ADDC™ (Automatic Data Direction Control)

Serial Communication Parameters

Parity

None, Even, Odd, Space, Mark

Data bits

5, 6, 7, 8

Stop bit(s)

1, 1.5, 2

Flow control

RTS/CTS, XON/XOFF, DTR/DSR

Speed

50 bps to 921.6 Kbps

Console port

RS-232 console × 1

Memory Expansion Slot

Slot Type

SD socket (supports up to 2 GB)

Power Requirements

Power input

100 to 240 VAC, 47 to 63 Hz, 88 to 300 VDC,

±48 VDC (20 to 72 VDC, -20 to -72 VDC)

Alarm Contact

Relay output with current carrying capacity of 1A

@ 24 VDC

Mechanical Specifications

Material

SECC sheet metal (1 mm)

Dimensions

(W×D×H)

480×44×195 mm (including ears)

440×44×195 mm (without ears)

Operating Temperatures

Standard Temp. Models: 0 to 55°C (32 to 131°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Storage Temperatures

Standard and Wide Temp. Models: -40 to 75°C (-40 to 167°F)

High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Regulatory Approvals

EMC

FCC Class A, CE Class A

Safety

UL, CUL, EN 60950-1

Dieses Handbuch passt für folgende Modelle

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2004 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2510 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6250 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2610 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies 2140 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort DE-311 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Bedienungsanleitung

Moxa Technologies

Moxa Technologies FLI-1200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 2110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IAW5000A- I/O Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210-T Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung