Moxa Technologies IoLogik E1510-T Bedienungsanleitung

– 1 – – 2 – – 3 –

P/N: 1802015000011

ioLogik E1500 Series

Quick Installation Guide

Second Edition, February 2015

Overview

With a threaded M12 Ethernet port to ensure wired connectivity, a

spring-type terminal block for vibration-resistant cabling, and a

DIN rail mount assembly, the ioLogik E1500 series is designed to

withstand the severe vibrations experienced with rolling stock and

wayside applications. Carefully engineered channel-to-channel

isolation gives protection against cross-line power surges and

crosstalk, ensuring stable data communications. In addition, the

ioLogik E1500 is compliant with EN 50121-3-2, EN 50121-4, and

essential sections of the EN 50155 standard (covering operating

temperature, power input voltage, electrical surges, ESD, and

vibration), all of which are required for electronic equipment used

on or around railway vehicles.

Model Selection

ioLogik

DIO

Relay

RTD

E1510-T

–

E1512-T

–

Package Checklist

•1 ioLogik E1500 series remote I/O product

•Documentation and software CD

•Quick installation guide (printed)

Specifications

System

Ethernet

10/100 Mbps, M12 connector

Protection

1.5 KV magnetic isolation

Protocols

Modbus/TCP, TCP/IP, UDP, DHCP, Bootp,

HTTP

Power Input

24 VDC nominal, 12 to 48 VDC

Wiring

I/O cable, max. 14 AWG

Dimensions

144 x 124 x 30 mm (5.67 x 4.88 x 1.18 in)

Weight

825 g

Operating Temperature

-40 to 85°C (-40 to 185°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Ambient Relative

Humidity

5 to 95% (non-condensing)

Altitude:

Up to 2000 m

Note: Please contact Moxa if you require products guaranteed to

function properly at higher altitudes.

Standards and

Certifications

UL 508, EN 50155, EN 50121-3-2, EN

50121-4

Warranty Period

5 years

Details

See www.moxa.com/warranty

Digital Input

Sensor Type

NPN, PNP, and Dry contact

I/O Mode

DI or Event Counter

Dry Contact

• On: short to GND

• Off: open

Wet Contact • On: 0 to 3 VDC

• Off: 10 to 30 VDC

Isolation

3k VDC or 2k Vrms

Counter/Frequency

250 Hz, power off storage

Digital Output

I/O Mode

DO or Pulse Output

Pulse Wave

Width/Frequency

1 ms/500 Hz

Over-voltage

Protection

45 VDC

Over-current Protection

2.6 A (4 channels @ 650 mA)

Over-temperature

Shutdown

175°C (typical), 150°C (min.)

Current Rating

200 mA per channel

Isolation

3k VDC or 2k Vrms

Installation

Power and Networking

Connect the +12 to +48 VDC power line to the ioLogik E1500’s

terminal block V+ terminal, and connect the ground from the

power supply to the V- terminal. If an earth ground is available,

connect the ground pin ( ).

Mounting and Cabling

The ioLogik E1500 can be used with both DIN rail and wall mounts.

When mounting on a DIN rail, release the bottom mounting kit,

install the ioLogik on the rail, and then restore the bottom

mounting kit to fix the ioLogik to the rail. When using wall

mounting, release both the upper and bottom DIN rail kits.

The ioLogik E1500 has an M12 Ethernet port for connecting either

a standard direct-Ethernet or crossover-Ethernet cable via a

locking M12 connector.

LED Indicators

Type

Color

Description

PWR

Green

System power in ON

Off

System power is OFF

RDY

Green

System is ready

Green Blinking

Located

Red

System Booting-up Error

Green/Red

Blinking

Safe Mode

Red Blinking

Firmware upgrade (LED flashes for 3

seconds then stays red until restart)

Off

System is not ready

LAN

Green

100 Mbps

Amber

10 Mbps

Blinking

Data Transmitting

Off

Ethernet Off

EXP

Green

Expansion Mode Ready

Red

Configuration Failure

Off

Stand-alone Mode

Green

Channel ON

Off

Channel OFF

DIO

Green

Channel ON

Off

Channel OFF

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

I/O Wiring

DI dry contact mode

DI wet contact mode (Ch-Ch isolation)

DI wet contact PNP/NPN mode (No CH-CH isolation)

DIO_DI wet contact mode (no CH-CH isolation)

DIO_DO sink mode

System Configuration

Configuration via Web Console

Configuration of an ioLogik E1500 is done via the web console.

•Default IP Address: 192.168.127.254

•Subnet Mask: 255.255.255.0

Note: Be sure to configure the host PC’s IP address to the same

subnet as the ioLogik E1500. For example, 192.168.127.253.

ioSearch Utility

ioSearch is a search utility that helps users locate an ioLogik E1500

on the local network. The utility can be found in the Documentation

and Software CD under Software ioSearch; the latest version

can be downloaded from Moxa’s website.

Load Factory Default Settings

There are three ways to restore the ioLogik E1500 to the factory

default settings.

1. Remove the two screws and the aluminum plate, and then

press and hold the RESET button for 5 seconds.

2. Right click the specified ioLogik in the ioSearch utility and

select Reset to Default.

3. Select Load Factory Default from the web console.

Modbus Address Table

Refer to the user’s manual for details of the ioLogik’s Modbus

address, or refer to the start address of the I/O channels in the

web console under User-defined Modbus Addressing Default

Address.

Active OPC Server Connection

Take the following steps to connect the ioLogik E1500 to an Active

OPC Server:

1. Disable the user-defined Modbus address function.

2. Install the Active OPC Server Lite Package from the

Documention and Software CD under Software AOPC Lite 

ActiveOPCSetup Install.exe.

3. Install from the Web console under Active OPC Server Settings

AOPC & I/O Settings. and specify the IP address of the

Active OPC Server. Specify the I/O channels that need to be

added to Active OPC Server Lite, submit the settings, and then

click Save/Restart.

4. From the web console under Active OPC Server Settings 

Create AOPC Tag, click the “Create Tag” button.

5. Launch Active OPC Server Lite from Start Programs MOXA

IOServer ActiveOPC ActiveOPC. Save the configuration

before exiting the Active OPC Server Lite program.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies NPort 5250A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S8455I Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Handbuch

Moxa Technologies

Moxa Technologies NPort Server Lite DE-302 Handbuch

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6250 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies 5400 Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2500 Bedienungsanleitung

Moxa Technologies

Moxa Technologies 5600 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies 6150 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 2110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DTL Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S8455I-MM-SC Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6450 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6450 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2510-8 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Moxa Technologies ioLogik E1510-T Bedienungsanleitung

Beliebte Server Handbücher anderer Marken