Moxa Technologies VPort 2110 Bedienungsanleitung

MOXA VPort 2110/2140/2141

Video Server

Quick Installation Guide

Third Edition, July 2006

MOXA Networking Co., Ltd.

Tel: +886-2-2910-1230

Fax: +886-2-2910-1231

www.moxa.com

support@moxanet.com (Worldwide)

support@moxa.com (The Americas)

NOTE: This Quick Installation Guide describes basic installation

procedures for VPort 2110/2140/2141 Video Servers. Please refer to

the User’s Manual on the documentation CD for more detailed

instructions about using these products.

P/N: 1802021100200

MOXA VPort 2110/2140/2141

Video Server Quick Installation Guide

The software described in this manual is furnished under a license

agreement and may be used only in accordance with the terms of that

agreement.

Reproduction without permission is prohibited.

Trademarks

MOXA is a registered trademark of The Moxa Group.

All other trademarks or registered marks in this manual belong to their

respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does

not represent a commitment on the part of Moxa.

Moxa provides this document “as is,” without warranty of any kind, either

expressed or implied, including, but not limited to, its particular purpose.

Moxa reserves the right to make improvements and/or changes to this

manual, or to the products and/or the programs described in this manual, at

any time.

Information provided in this manual is intended to be accurate and reliable.

However, Moxa Technologies assumes no responsibility for its use, or for

any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors.

Changes are periodically made to the information herein to correct such

errors, and these changes are incorporated into new editions of the

publication

Chapter 1 Package Checklist

VPort 2110 Video Server

Standard Accessories

y1 VPort 2110 Video Server

yPower adapter

¾Input: 100 to 240 VAC

¾Output: +12 VDC, 1.5A (UK Standard: +12 VDC, 1.25A)

yPTZ Camera Control Cable

yNull Modem Cable (Female DB9 to Female DB9)

yI/O Terminal Block Kit for

¾1 DI, 1 Relay Output

¾1 RS-485 COM port

yQuick Installation Guide

ySoftware CD

yWrench and Pad

yWarranty Card

Optional Accessories (must be ordered separately)

yDIN-Rail Mounting Kit DK-35A

VPort 2110/2140/2141 Quick Installation Guide

1-2

VPort 2140 Video Server

Standard Accessories

y1 VPort 2140 Video Server

yPower adapter

¾Input: 100 to 240 VAC

¾Output: +12 VDC, 1.5A (UK Standard: +12 VDC, 1.25A)

yPTZ Camera Control Cable

yNull Modem Cable (Female DB9 to Female DB9)

yI/O Terminal Block Kit ×2 for

¾4 DI, 2 Relay Outputs

¾1 RS-485 COM port

¾1 12 VDC Power Output (Max. 500 mA)

¾1 External Power Input (12 VDC, Min. 1.5A)

yQuick Installation Guide

ySoftware CD

yL-type Fixed Aluminum piece and 8 screws

yWarranty Card

VPort 2141 Video Server

Standard Accessories

y1 VPort 2141 Video Server

yPower adapter

¾Input: 100 to 240 VAC

¾Output: +12 VDC, 1.5A (UK Standard: +12 VDC, 1.25A)

yPTZ Camera Control Cable

yI/O Terminal Block Kit ×2 for

¾4 DI, 4 Relay Outputs

¾1 RS-485 COM port

¾1 12 VDC Power Output (Max. 500 mA)

¾1 External Power Input (12-15 VDC/VAC, Min. 1.5A)

yQuick Installation Guide

ySoftware CD

yPanel Mounting Kit with 4 screws

yPad

yWarranty Card

Optional Accessories (must be ordered separately)

yDIN-Rail Mounting Kit DK-35A

Chapter 2 Product Description

Panel Layout

VPort 2110 Video Server

Front Panel

1. BNC video input

Rear Panel

2. 12 VDC power input

3. Network and status LEDs

4. GPIO terminal block for

DI, DO, relay, and RS-485

COM port

5. “Restore default setting”

button

6. RJ45 10/100 Mbps

Ethernet connector

7. RS-232 COM port

VPort 2110/2140/2141 Quick Installation Guide

2-2

VPort 2140 Video Server

Front Panel

1. Reset & default buttons for restoring the system

2. BNC video output (switch on the 75ΩDIP switch)

3. BNC video input

4. Video/camera number

5. 75Ωresistance DIP Switch

6. System status LEDs

7. Network status LEDs

Rear Panel

8. RS-232 COM port for connecting PTZ camera

9. GPIO terminal block PIN description

10. RJ45 10/100 Mbps Ethernet connector

11. RS-232 COM port for connecting modem or PTZ camera

12. GPIO terminal block for DI, DO, relay, RS-485 COM port,

12 VDC power input and output

13. 12 VDC power input

Product Description

2-3

VPort 2141 Video Server

Front Panel

OFF

1234

RESET

POWER

CONNECT

SERIAL

ACTIVE

LINK

FDX

VIDEO 2VIDEO 1 VIDEO 4VIDEO 3

33 1

1. Reset button for restoring the default configuration

2. BNC Video Input (switch off the 75ΩDIP switch)

3. Video/Camera Number

4. 75Ωresistance DIP Switches

5. System Status LEDs

6. Network Status LEDs

Rear Panel

COM 1

(RS-232)

10/100 Mbps

Ethernet

Power OUT: 12 VDC Relay 1

NO C NC NO C NC

Relay 2 D 1ID 2IRS-485

POWER IN

12 VDC

2 3 4 5 6 7 8 9 10 11 12

Power IN: 12-15V DC/AC Relay 3

NO C NC NO C NC

Relay 4 D 3ID 4IRS-485

2615

17 18 19 20 21 22 23 24

123 4 56 789101112

15 16 17 18 19 20 21 22 23 24 25

791011 8

7. RS-232 COM port for connecting PTZ camera

8. GPIO Terminal Block PIN description

9. RJ45 10/100 Mbps Ethernet connector

10. GPIO Terminal Block for DI, DO, relay, RS-485 COM port,

12 VDC power input and output

11. 12 VDC Power Input

Andere Handbücher für VPort 2110

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies NPort IA5000A-I/O series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S8455I Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S9000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-1127 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5610-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2250A-EU Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies 6150 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DTL Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1510-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5000AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MIINEPORT E1 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung