Moxa Technologies NPort 6150 Series Bedienungsanleitung

— 1 — — 2 — — 3 —

NPort 6150 Series

Quick Installation Guide

Third Edition, June 2008

1. Overview

The NPort 6150 series of secure serial device servers provide reliable

serial-to-Ethernet connectivity for a wide range of serial devices. The

NPort 6150 supports TCP Server, TCP Client, UDP, and Pair-Connection

operation modes to ensure the compatibility of network software. In

addition, the NPort 6150 also supports Secure TCP Server, Secure TCP

Client, Secure Pair-Connection, and Secure Real COM modes for security

critical applications such as banking, telecom, access control and remote

site management.

2. Package Checklist

Before Installing the NPort 6150 secure device server, verify that the

package contains the following items:

y1 NPort 6150

yDocument & Software CD

yQuick Installation Guide (this guide)

yPower Adaptor

yProduct Warranty Statement

y2 Wall mount ears

Optional Accessories

yDK-35A: DIN-Rail mounting kit (35 mm)

yDIN-Rail Power Supply

yCBL-RJ45M9-150: 8-pin RJ45 to male DB9 cable

yCBL-RJ45M25-150: 8-pin RJ45 to male DB25 cable

NOTE: Please notify your sales representative if any of the above items

are missing or damaged.

3. Hardware Introduction

LAN RESET POWER JACK

LED Inicators

Reset Button—Press the Reset button continuously for 5 sec to load

factory defaults: Use a pointed object, such as a straightened paper clip or

toothpick, to press the reset button. This will cause the Ready LED to

blink on and off. The factory defaults will be loaded once the Ready LED

stops blinking (after about 5 seconds). At this point, you should release

the reset button.

LED Indicators

LED Name LED Color LED Function

PWR Red Power is being supplied to the power input.

Steady on: Power is on and the NPort

6150 is booting up.

Red

Blinking: Indicates an IP conflict, or, the

DHCP or BOOTP server did

not respond properly or a relay

output occurred. Check the

relay output first. If after

resolving the relay output the

RDY LED is still blinking,

then there is an IP conflict, or

the DHCP or BOOTP server

did not respond properly.

Steady on: Power is on and the NPort

6150 is functioning normally.

Green Blinking: The device server has been

located by the Administrator’s

Location function.

Ready

Off Power is off, or power error condition exists.

Orange 10 Mbps Ethernet connection.

Green 100 Mbps Ethernet connection

Link

Off Ethernet cable is disconnected, or has a

short.

Orange Serial port is receiving data.

Green Serial port is transmitting data.

Off No data is being transmitted or received

through the serial port.

Green Serial port was opened by server side

software.

P1 in-use

LED Off Serial port has not been opened by server

side software.

Adjustable pull high/low resistor for RS-422/485 (150 KΩor 1 KΩ)

JP4, JP5

Jumpers are used to set the pull

high/low resistors. The default is

150 KΩ. Short the jumpers to set

this value to 1 KΩ. Do not use the

KΩsetting with RS-232 mode,

since doing so will degrade the

RS-232 signals and shorten the

communication distance.

P/N: 1802061500012

All manuals and user guides at all-guides.com

— 4 — — 5 — — 6 —

4. Hardware Installation Procedure

STEP 1: Connect the 12-48 VDC power adaptor to the NPort 6150 and

then plug the power adaptor into a DC outlet.

STEP 2: For first-time configuration, use a cross-over Ethernet cable to

connect the NPort 6150 directly to your computer’s Ethernet

cable. For connecting to a network, use a standard

straight-through Ethernet cable to connect to a hub or switch.

STEP 3: Connect the NPort 6150’s serial port to a serial device.

Placement Options

The NPort 6150 can be placed flat on a desktop or other horizontal

surface. In addition, you may use the DIN-Rail or Wall Mount options, as

illustrated below.

Wall Mount Din Rail

NPort6150

5. Software Installation Information

The Document & Software CD contains the User’s Manual, NPort Search

Utility, and the PComm Lite Suite. Insert the CD and follow the

on-screen instructions. Please refer to the User’s Manual for additional

details on using the NPort Search Utility and PComm Lite.

6. PinAssignments and Cable Wiring

RS-232/422/485 PinAssignment (male DB9)

Pin RS-232 RS-422

4-wire RS-485 2-wire RS-485

1 DCD TxD-(A) ---

2 RXD TxD+(B) ---

3 TXD RxD+(B) Data+(B)

4 DTR RxD-(A) Data-(A)

5 GND GND GND

6 DSR --- ---

7 RTS --- ---

8 CTS --- ---

9 --- --- ---

12345

6789

Two serial cables for connecting the NPort 6150 to a serial device can be

purchased separately. The wiring diagrams for the two cables are shown

below.

CBL-RJ45M9-150: 8-pin RJ45 to male DB9

NPort 6150

9 pins 9 pins

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

RS-232

Device

DCD

TxD

RxD

DSR

GND

DTR

CTS

RTS

Cable Wiring

Female DB9 Male DB9Male DB9 Female DB9

CBL-RJ45M25-150: 8-pin RJ45 to Male DB25

NPort 6150

9 pins 25 pins

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

RS-232

Device

DCD

TxD

RxD

DSR

GND

DTR

CTS

RTS

Cable Wiring

Female DB9 Male DB25Male DB9 Female DB25

7. Specifications

LAN

Ethernet: 10/100 Mbps, RJ45

Protection: Built-in 1.5 KV magnetic isolation

Serial

No. of ports: 1

Interface: RS-232/422/485 (male DB9)

Serial Communication Parameters

Parity: None, Even, Odd, Space, Mark

Data bits: 5, 6, 7, 8

Stop bit(s): 1, 1.5, 2

Flow control: RTS/CTS, XON/XOFF, DTR/DSR

Speed: 50 bps to 921.6 Kbps

Console Port: RS-232 (please see the User’s Manual for

detailed operating instructions)

Software Features

Protocols: I C M P, I P, T C P, U D P, D H C P, B O O T P, Te l n e t ,

DNS, SNMP, HTTP, SMTP, HTTPS, SSL, SSH,

PPPoE, RFC2217

Utilities: NPort Search Utility for Windows

98/ME/NT/2000/XP/2003/Vista/XP x64/2003

x64/Vista x64

Security Protocols: DES/3DES/AES

OS Driver Support: Real COM drivers:

Windows 95/98/ME/NT/2000/XP/XP

x64/2003/2003 x64/Vista/Vista x64

Real TTY drivers: Linux 2.4 and 2.6

Fixed TTY drivers: SCO Unix, SCO OpenServer

5, OpenServer 6, UnixWare 7, UnixWare 2.1,

SVR4.2, QNX 4.25, QNX 6, Solaris 10,

FreeBSD 5, FreeBSD 6

Configuration: Web Console, Serial/Telnet Console, Windows

utility

Power Requirements

Power input: 12 to 48 VDC

Mechanical Specifications

Material: Aluminum (1 mm)

Environment

Operating Temperature: 0-55°C (32 to 131°F), 5 to 95% RH

Storage Temperature: -20 to 85°C (-4 to 185°F), 5 to 95%RH

Regulatory Approvals

EMC: FCC Class A, CE Class A

Safety: UL, CUL, TUV

Click here for online support:

www.moxa.com/support

The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872)

Europe: +49-89-3 70 03 99-0

Asia-Pacific: +886-2-8919-1230

China: +86-21-5258-9955 (toll-free: 800-820-5036)

Reproduction without permission is prohibited.

All manuals and user guides at all-guides.com

Andere Handbücher für NPort 6150 Series

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies NPort 5000AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DTL Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A-W4 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000A-I/O series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2510-16 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5610-8 Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2610 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5150AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2510-8 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA-5150-M-SC Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5000AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5610 series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung