Moxa Technologies NPort 5100 Series Bedienungsanleitung

— 1— — 2 — — 3 —

NPort 5100 Series

Quick Installation Guide

Second Edition, June 2009

1. Overview

NPort 5100 series device servers are compact, palm-sized data

communication devices that allow you to control RS-232 (NPort 5110),

RS-422/485 (NPort 5130), and RS-232/422/485 (NPort 5150) serial

devices over a TCP/IP-based Ethernet.

Note: “-T” indicates an extended temperature model.

2. Package Checklist

Before installing the NPort 5100 series device server, verify that the

package contains the following items:

y1 NPort 5100 series 1-port serial device server

y4 stick-on pads

yDocument & Software CD

yNPort 5100 series Quick Installation Guide

yProduct Warranty Statement

Optional Accessory

yDK-35A: DIN-Rail Mounting Kit (35 mm)

Notify your sales representative if any of the above items are missing or

damaged.

3. Hardware Introduction

As shown in the following figures, NPort 5100 series device servers have

one male DB9 port for transmitting RS-232 (NPort 5110), RS-422/485

(NPort 5130), or RS-232/422/485 (NPort 5150) serial data.

Top Panel View

DIN-Rail

screw hole

Wallmount

screw hole

Ready

Link

Tx/Rx

Serial Device Server

5110

10/100M

Ethernet

RESET

12-48 VDC

Port 1 RS-232

Male DB9 serial port

Front Panel View

RJ45 10/100M Ethernet port

Reset button

Power input

Rear Panel View

Stick-on pad

NOTE: The NPort 5110, NPort 5130, and NPort 5150 have the same

form factor.

Reset Button—Press the Reset button continuously for 5 sec to load

factory defaults: Use a pointed object, such as a straightened paper clip or

toothpick, to press the reset button. This will cause the Ready LED to

blink on and off. The factory defaults will be loaded once the Ready LED

stops blinking (after about 5 seconds). At this point, you should release

the reset button.

LED Indicators—NPort 5100’s top panel has three LED indicators,

which are described in the following table.

LED

Name

LED

Color LED Function

Red

Steady on: Power is on and NPort is booting up.

Blinking: Indicates an IP conflict, or DHCP or

BOOTP server is not responding

properly.

Green

Steady on: Power is on and NPort is functioning

normally.

Blinking: The NPort has been located by

NPort Administrator’s Location

function

Ready

Off Power is off, or power error condition exists.

Orange 10 Mbps Ethernet connection.

Green 100 Mbps Ethernet connection.

Link

Off Ethernet cable is disconnected, or has a short.

Orange Serial port is receiving data.

Green Serial port is transmitting data.

Tx/Rx

Off No data is being transmitted or received through

the serial port.

Adjustable pull high/low resistor for RS-422/485 (150 KΩor 1 KΩ)

JP3

JP4

Jumpers are used to set the pull high/low

resistor values. The default is 150 KΩ. Short

the jumpers to set this value to 1 KΩ. Do not

use the KΩsetting with RS-232 mode, since

doing so will degrade the RS-232 signals and

shorten the communication distance.

4. Hardware Installation Information

STEP 1: After removing the NPort 5100 series device server from the

box, the first thing you should do is connect the power adaptor.

STEP 2: Connect the NPort 5100 series device server to a network. Use a

standard straight-through Ethernet cable to connect to a hub or switch.

When setting up or testing the NPort 5100 series device server, you might

find it convenient to connect directly to your computer’s Ethernet port. In

this case, use a cross-over Ethernet cable.

STEP 3: Connect the NPort 5100 series device server’s serial port to a

serial device.

STEP 4: Placement options

In addition to placing

the NPort 5100 on a

desktop or other

horizontal surface, you

may also make use of

the DIN-Rail or Wall

Mount options, as

illustrated here.

Wall Mount DIN-Rail

Ready

Link

Tx/Rx

Serial Device Server

5110

10/100M

Ethernet

RESET

Port 1 RS-232

12-48 VDC

P/N: 1802051000011

—4— —5 — — 6 —

5. Software Installation Information

To install NPort Administration Suite, insert the NPort Document &

Software CD into your computer’s CD-ROM drive. Once the NPort

Installation CD window opens, click on the Installation button, and then

follow the instructions on the screen.

To view detailed information about NPort Administration Suite, click

on the Documents button, and then select “NPort 5100 Series User’s

Guide” to open the pdf version of the user’s guide.

6. Pin Assignments

Ethernet Port Pinouts

Pin Number Ethernet

1 Tx+

2 Tx-

3 Rx+

6 Rx-

NPort 5110—DB9 male (RS-232) port pinouts

Pin Number RS-232

1 DCD

2 RxD

3 TxD

4 DTR

5 GND

6 DSR

7 RTS

8 CTS

9 ---

NPort 5130—DB9 male (RS-422/485) port pinouts

Pin Number RS-422/485 (4W) RS-485 (2W)

1 TXD-(A) ---

2 TXD+(B) ---

3 RXD+(B) Data+(B)

4 RXD-(A) Data-(A)

5 GND GND

6 --- ---

7 --- ---

8 --- ---

9 --- ---

NPort 5150—DB9 male (RS-232/422/485) port pinouts

Pin Number RS-232 RS-422/485 (4W) RS-485 (2W)

1 DCD TXD-(A) ---

2 RxD TXD+(B) ---

3 TxD RXD+(B) Data+(B)

4 DTR RXD-(A) Data-(A)

5 GND GND GND

6 DSR --- ---

7 RTS --- ---

8 CTS --- ---

9 --- --- ---

7. Specifications

Power Requirements

Power Input 12 to 48 VDC

Power Consumption NPort 5110: 128.7 mA@12V, 72 mA@24V

NPort 5130: 200 mA@12V, 106 mA@24V

NPort 5150: 200 mA@12V, 106 mA@24V

Operating Temperature 0 to 55°C (32 to 131°F), for standard models

-40 to 75°C (-40 to 167°F), for -T models

Operating Humidity 5 to 95% RH

75.2 ×80 ×22 mm

(2.96 ×3.15 ×0.87 in)

Åincluding earsDimensions

52 ×80 ×22 mm

(2.05 ×3.15 ×0.89 in)

Åwithout ears

Serial Line Protection 15 KV ESD for serial port

Magnetic Isolation 1.5 KV for Ethernet

Power Line Protection Level 2 Burst (EFT), EN61000-4-4

Level 2 Surge, EN61000-4-5

Regulatory Approvals FCC Class A, CE Class A, UL, TÜV

Click here for online support:

www.moxa.com/support

The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872)

Europe: +49-89-3 70 03 99-0

Asia-Pacific: +886-2-8919-1230

China: +86-21-5258-9955 (toll-free: 800-820-5036)

Reproduction without permission is prohibited.

Andere Handbücher für NPort 5100 Series

Dieses Handbuch passt für folgende Modelle

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies NPort W2004 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DTL Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5000AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5610-8 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200-P Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150 Plus Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort DE-311 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5130 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1510-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-1127 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA-5150-M-SC Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies MIINEPORT E1 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5150AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2510-8 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5150AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2600 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung