Moxa Technologies NPort 6150 Series Bedienungsanleitung

P/N: 1802061500018

*1802061500018*

NPort 6150/6250 Series

Quick Installation Guide

Version 11.0, March 2020

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The NPort 6150/6250 Series secure serial device servers provide

reliable serial-to-Ethernet connectivity for a wide range of serial

devices. The NPort 6150/6250 support TCP Server, TCP Client, UDP,

and Pair-Connection operation modes to ensure the compatibility of

network software. In addition, the NPort 6150/6250 also support

Secure TCP Server, Secure TCP Client, Secure Pair-Connection, and

Secure Real COM modes for security critical applications such as

banking, telecom, access control, and remote site management.

Package Checklist

Before installing an NPort 6150/6250 secure device server, verify that

the package contains the following items:

•NPort 6150 or NPort 6250

•Power adapter (does not apply to -T models)

•2 wall-mount ears

•Documentation

•Quick installation guide (this guide)

•Warranty card

Optional Accessories

•DK-35A: DIN-rail mounting kit (35 mm)

•CBL-RJ45M9-150: 8-pin RJ45 to male DB9 cable

•CBL-RJ45M25-150: 8-pin RJ45 to male DB25 cable

NOTE: Please notify your sales representative if any of the above items

are missing or damaged.

NOTE

The operating temperature of the power adapter in the box is

from 0 to 40°C. If your application is out of this range, please

use a power adapter supplied by UL Listed External Power

Supply (The power output meets SELV and LPS and

rated 12 to

48 VDC; the minimum current is 0.43 A).

Hardware Introduction

NPort 6150

- 3 -

NPort 6250

Reset Button—Press the Reset Button continuously for 5 sec to load

factory defaults. Use a pointed object, such as a straightened paper clip

or toothpick, to press the reset button. This will cause the Ready LED to

blink on and off. The factory defaults will be loaded once the Ready LED

stops blinking (after about 5 seconds). At this point, you should release

the reset button.

LED Indicators

LED Name

LED Color

LED Function

PWR

Red

Power is being supplied to the power input.

Ready

Red

Steady on

Power is on and the NPort is

booting up.

Blinking

Indicates an IP conflict, or, the

DHCP or BOOTP server did not

respond properly or a relay

output

occurred. Check the relay

output first. If after resolving

the relay output the RDY LED is

still blinking, then there is an IP

conflict, or the DHCP or BOOTP

server did not respond properly.

Green

Steady on

Power is on and the NPort is

functioning normally.

Blinking

The device server has been

located by the Administrator’s

Location function.

Off

Power is off, or power error condition exists.

LED Name

LED Color

LED Function

Link

Orange

10 Mbps Ethernet connection

Green

100 Mbps Ethernet connection

Off

Ethernet cable is disconnected, or has a

short.

P1, P2

Orange

Serial port is receiving data.

Green

Serial port is transmitting data.

Off

No data is being transmitted or received

through the serial port.

- 4 -

P1, P2 in-

use LED

Green

Serial port was opened by server side

software.

Off

Serial port has not been opened by server

side software.

Adjustable pull high/low resistor for RS-422/485 (150

KΩor 1 KΩ)

NPort 6150

NPort 6

250

Open the back door with

screwdriver and use the DIP

switch to set the pull high/low

resistors. The default is 150 kΩ.

You can switch the SW1 and SW2

to ON and change the resistors

value to 1 kΩ.

Do not use the 1 kΩ setting with

-232 mode, since doing so will

degrade t

he RS-232 signal and

shorten the communication

distance. In addition, you can

switch the SW3 to ON and set the

terminal resistor to 120Ω.

DIP Switch Setting

Hardware Installation Procedure

STEP 1:

Connect the 12-48 VDC power adaptor to the NPort 6150

and then plug the power adaptor into a DC outlet.

STEP 2:

For first-time configuration, use a cross-over Ethernet cable

to connect the NPort

6150 directly to your computer’s

Ethernet cable. For connecting to a network, use a standard

straight

-through Ethernet cable to connect to a hub or

switch.

STEP 3:

Connect the NPort 6150’s serial port to a serial device.

Placement Options

The NPort 6150/6250 device servers have built-in

"ears" for attaching the device server to a wall or the

inside of a cabinet. We suggest using two screws per

ear to attach the device servers to a wall or the inside

of a cabinet. The heads of the screws should be less

than 6.0 mm in diameter, and the shafts should be less

than 3.5 mm in diameter, as shown in the figure

the

right.

- 5 -

The NPort 6150/6250 can be placed flat on a desktop or other

horizontal surface. In addition, you may use the DIN-rail or wall--mount

options, as illustrated below.

Wall-mount

DIN-rail

Software Installation Information

For the NPort’s configuration, the default IP address of the NPort is

192.168.127.254. You may log in with the account name admin and

password moxa to change any settings to meet your network topology

(e.g., IP address) or serial device (e.g., serial parameters).

For software installation, download the relative utilities from Moxa's

website:

https://www.moxa.com/support/support_home.aspx?isSearchShow=1

• Download the NPort Windows Driver Manager and install it as the

driver to run with Real COM mode of the NPort Series.

• Execute NPort Windows Driver Manager; then map the virtual COM

ports on your Windows platform.

• You may refer to the DB9 Male pin assignment section to loop back

pin 2 and pin 3 for the RS-232 interface to carry out a self-test on the

device.

• Use HyperTerminal or a similar program (you may download Moxa's

program, called PComm Lite) to test whether the device is good or not.

Pin Assignments and Cable Wiring

RS-232/422/485 Pin Assignment (male DB9)

Pin RS-232

RS-422

4-wire RS-485

2-wire RS-

485

DCD

TxD-(A)

–

RXD

TxD+(B)

–

TXD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

- 6 -

Two serial cables for connecting the NPort 6150 to a serial device can

be purchased separately. The wiring diagrams for the two cables are

shown below.

WARNING

The u

se of controls or adjustments or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.

NOTE

Complies with 21 CFR 1040.10 and 1040.11, except for

conformance

with IEC 60825-1 Ed. 3, as described in Laser

Notice 56, dated May 8, 2019.

Andere Handbücher für NPort 6150 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 2110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S8000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Server Pro Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2510 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2004 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort P5150A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA-5150-M-SC Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5250I/5250I-T Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies 2140 Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2510-16 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S9000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150 series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung