Moxa Technologies NPort P5150A-DB9 Bedienungsanleitung

– 1 – – 2 – – 3 –

P/N: 1802051501010

NPort P5150A Series Quick

Installation Guide

First Edition, July 2011

Overview

NPort P5150A series device servers are compact, palm-sized data

communication devices that allow you to control RS-232/422/485

serial devices over a TCP/IP-based Ethernet.

Note: “-T” indicates an extended temperature model.

Package Checklist

Before installing the NPort P5150A series device server, verify that

the package contains the following items:

•1 NPort P5150A serial device server

•4 stick-on pads

•Document & Software CD

•Quick Installation Guide

•Product Warranty Statement

Optional Accessory

•DK-35A: DIN-Rail Mounting Kit (35 mm)

Notify your sales representative if any of the above items are

missing or damaged.

Hardware Introduction

As shown in the following figures, NPort P5150A series device

servers have one male DB9 port for transmitting RS-232/422/485

serial data.

Reset Button—Press and hold the Reset button for 5 seconds to

load factory defaults: Use a pointed object, such as a straightened

paper clip or toothpick, to depress the reset button. This will cause

the Ready LED to blink on and off. Once the Ready LED stops

blinking (after about 5 seconds), release the reset button and the

device server will start to load the factory defaults.

WARNING

1. T

he equipment is designed for in-building

installation only and is not intended to be connected

to exposed (outside plant) networks.

2. This equipment is intended to be used in a

Restricted Access Location.

3. This product is intended to be supplied by an

UL60950

-1 and IEC60950-1 certified Power Unit

marked “LPS” and rated output rating: 12 to 48 VDC,

0.18 A minimum, 75°C.

LED Indicators—NPort P5150A’s top panel has three LED

indicators, which are described in the following table.

LED

Name

LED

Color

LED Function

Ready

Red

Steady on:

Power is on and the NPort is booting

up.

Blinking:

Indicates an IP conflict, or DHCP or

BOOTP server is not responding

properly.

Green

Steady on:

Power is on and the NPort is

functioning normally.

Blinking: The NPort has been located by the

NPort Administrator’s Location

function.

Off

Power is off, or a power error..

Link Orange

10 Mbps Ethernet connection.

Green 100 Mbps Ethernet connection.

Off Ethernet cable is disconnected.

Tx/Rx Orange

Serial port is receiving data.

Green

Serial port is transmitting data.

Off No data is being transmitted or received through

the serial port.

Adjustable pull high/low resistor and terminator for RS-485

Remove the NPort P5150A’s top cover

and you will find DIP switches to adjust

each serial

port’s pull-high, pull-low,

and terminator.

Do not use the 1 KΩ

setting with RS

-232 mode, as

doing so

will degrade the RS

-232 signals and

shorten the communication

s range.

Pull-high resistor

Pull-low resistor

Terminator

1 K

120

OFF

*150 K

*---

*Default

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Hardware Installation Information

STEP 1: After removing the NPort P5150A series device server

from the box, if you are not using a PoE switch, the first thing you

should do is connect the power adaptor.

STEP 2: Connect the NPort P5150A series device server to a

network. Use a standard straight-through Ethernet cable to

connect to a PoE switch.

STEP 3: Connect the NPort P5150A series device server’s serial

port to a serial device.

STEP 4: Placement options.

In addition to placing the NPort P5150A on a desktop or other

horizontal surface, you may also make use of the DIN-Rail or Wall

Mount options, as illustrated below.

Software Installation Information

To install NPort Administration Suite, insert the NPort

Document & Software CD into your computer’s CD-ROM drive.

Once the NPort Installation CD window opens, click on the

Software folder, and then follow the instructions on the screen.

To view detailed information about NPort Administration Suite,

click on the Documents folder, and then select “NPort P5150A

Series User’s Manual” to open the pdf version of the user’s guide.

Pin Assignments

Ethernet Port Pinouts

Pin Number Ethernet

Tx+

Tx-

3 Rx+

Rx-

NPort P5150A—DB9 male (RS-232/422/485) port pinouts

Number

RS-232

RS-422/

485 (4W)

RS-485

(2W)

DCD

TxD-(A)

---

RxD

TxD+(B)

---

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

5 GND GND GND

DSR

---

RTS

---

8 CTS --- ---

---

Specifications

Power Requirements

Power Input 12 to 48 VDC (Supplied by power adapter) or

48 VDC (Supplied by PoE.)

Power

Consumption

125 mA @ 12V, 40 mA @ 48 VDC (Supplied by

power adapter)

180 mA @ 48V (Supplied by PoE.)

Environmental Limits

Operating

Temperature

0 to 60°C (32 to 140°F), for standard models

-40 to 75°C (-40 to 167°F), for -T models

Operating

Humidity

5 to 95% RH

Dimensions

With Ears:

100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in

Without Ears: 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)

Protection

Serial Line

Protection

Level 2 Surge, EN61000-4-5

15 KV ESD for serial port

Magnetic Isolation

1.5 KV for Ethernet

Power Line

Protection

Level 2 Burst (EFT), EN61000-4-4

Level 3 Surge, EN61000-4-5

Regulatory Approvals

FCC Class A, CE Class A, UL 60950-1, EN 60950-1

Inhaltsverzeichnis

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies MiiNePort E1-SDK Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Handbuch

Moxa Technologies

Moxa Technologies NPort W2250 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MIINEPORT E1 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort DE-311 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5610-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort DE-311 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6250 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5610-16 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6450 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2250A-EU Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5150AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150A Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung