Moxa Technologies TN-5516A Series Handbuch

P/N: 1802055160021

TN-5516A/5518A Series

Hardware Installation Guide

Moxa ToughNet Switch

Second Edition, August 2014

www.ipc2u.ru

www.moxa.pro

- 2 -

Overview

The ToughNet TN-5516A/5518A series M12 managed Ethernet switches

are designed for industrial applications in harsh environments. The TN

series switches use M12 connectors to ensure tight, robust connections,

and guarantee reliable operation against environmental disturbances,

such as vibration and shock. The wide 24 to 110 VDC with dual power

input (non-PoE series) increases the reliability of your communications.

The TN-5516A series includes PoE and non-PoE switches.

• TN-5516A series: 16 Fast Ethernet M12 ports.

• TN-5516A-8PoE series:8 Fast Ethernet and 8 PoE Fast Ethenet M12

ports.

The TN-5518A series also includes PoE and non-PoE switches.

• TN-5518A series: 16 Fast Ethernet M12 ports, supports additional 2

Gigabit ports located on the bottom of the unit, with or without bypass

function.

• TN-5518A-8PoE series: 8 Fast Ethernet and 8 PoE Fast Ethenet M12

ports, supports additional 2 Gigabit ports located on the bottom of the

unit, with or without bypass function.

The -40 to 75°C operating temperature and IP54 rated waterproof

enclosure allow deployment in harsh environments. The

TN-5516A/5518A series Ethernet switches are compliant with EN

50155/50121-3-2/50121-4 (railway applications) requirements,

covering operating temperature, power input voltage, surge, ESD, and

vibration, making the switches suitable for a variety of industrial

applications

Package Checklist

Your ToughNet TN-5516A/5518A switch is shipped with the following

items. If any of these items are missing or damaged, please contact your

customer service representative for assistance.

•1 Moxa ToughNet switch

•M12 to DB9 console port cable

•2 protective caps for console and relay output ports

•Panel mounting kit

•CD-ROM with user’s manual, Windows utility, and SNMP MIB file

•Hardware installation guide

•Warranty card

Features

Anti-Vibration Circular Connectors for Robust Links

•M12 D-coding 4-pin female connectors for Fast Ethernet

10/100BaseT(X) ports

•M12 X-coded 8-pin female connectors for Gigabit Ethernet

10/100/1000BaseT(X) ports

•M12 A-coding 5-pin male connectors for console and relay output

•M23 6-pin male connectors for power input

Isolated Power Inputs

•Supports 24-110 VDC (16.8 to 137.5 VDC)

High Performance Network Switching Technology

•IPv6 ready, certified by the IPv6 Logo Committee

www.ipc2u.ru

www.moxa.pro

- 3 -

•IEEE 1588 PTP (Precision Time Protocol) for the precise time

synchronization of networks

•DHCP Option 82 for IP address assignment with different policies

•EtherNet/IP and Modbus/TCP industrial Ethernet protocols supported

•Turbo Ring and Turbo Chain (recovery time <20 ms @250

switches),and STP/RSTP/MSTP for network redundancy

•IGMP Snooping and GMRP for filtering multicast traffic from industrial

Ethernet protocols

•Port-based VLAN, IEEE802.1Q VLAN, and GVRP protocol to ease

network planning

•QoS (IEEE 802.1p/1Q and ToS/DiffServ) allows real-time traffic

classification and prioritization

•802.3ad, LACP for optimum bandwidth utilization

•TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance

network security

•SNMP v1/v2c/v3 for different levels of network management

•RMON for efficient network monitoring and proactive capability

•Bandwidth management prevents unpredictable network status

•Lock port allows access by only authorized MAC addresses

•Port mirroring for online debugging

•Automatic warning by exception through email, relay output

•Automatic recovery of connected devices’ IP addresses

•Line-swap fast recovery

•LLDP for automatic topology discovery through network management

software

•Loop protection prevents network loops

•Configurable through Web browser, Telnet/Serial console, CLI, and

Windows utility

Designed for Industry-Specific Applications

•Two Gigabit Ethernet ports to meet high bandwidth requirements.

•Bypass relay option on the 2 Gigabit Ethernet ports ensures non-stop

data communication in the event a switch stops working due to a

power failure.

•EN 50155/50121-3-2/50121-4 compliant

•-40 to 75°C operating temperature range

•IP54 rugged high-strength case

•Panel mounting or DIN rail mounting installation capability

Recommended Optional Accessories

•CBL-M23(FF6P)Open-BK-100-IP67: 1-meter M23 to 6-pin power

cable with IP67-rated female 6-pin M23 connector

•CBL-M12D(MM4P)/RJ45-100 IP67: 1-meter M12-to-RJ45 Cat-5E UTP

Ethernet cable with IP67-rated male 4-pin M12 D-coded connector

•CBL-M12(FF5P)/OPEN-100 IP67: 1-meter M12-to-5-pin power cable

with IP67-rated female 5-pin M12 A-coded connector

•M12D-4P-IP68: Field-installable M12 D-coded screw-type connector,

male 4-pin, IP68-rated

•M12A-5P-IP68: Field-installable M12 A-coded screw-type connector,

female 5-pin, IP68-rated

•CAP-M12F-M: Metal cap for M12 female connector

•DK-DC50131: DIN rail mounting kit, 50 x 131 mm

www.ipc2u.ru

www.moxa.pro

- 4 -

TN-5516A/5518A Panel Layouts

1. Model name

2. Screw holes for

panel mounting kit

3. Console port

4. Grounding screw

5. Relay output port

6. Power input voltage

range indicator

7. Power input port

(male 5-

pin shielded

M23 connector)

8. PWR1 LED: for

power input 1

9. PWR2 LED: for

power input 2

10.

FAULT LED

11.

MSTR/HEAD LED: for

ring master or chain

head

12.

CPLR/TAIL LED: for

ring coupler or chain

tail

13.

TP port’s 10/100

Mbps LED

14.

10/100BaseT(X)

port (M12 D-coded

4-pin female

connector)

15.

Waterproof vent

16.

Product label

17.

12 screw holes for

DIN rail mounting kit

18. E2 LED: Not used by the TN-5516A series

19.

E1 LED: Not used by the TN-5516A series

20.

Gigabit Ethernet port E1 (corresponds to port 17 in the TN-5518A

User’s Manual)

21.

Gigabit Ethernet port E2 (corresponds to port 18 in the TN-5518A

User’s Manual)

www.ipc2u.ru

www.moxa.pro

- 5 -

TN-5516A-8PoE/5518A-PoE Panel Layouts

1. Model name

2. Screw holes for

panel mounting kit

3. Console port

4. Grounding screw

5. Relay output port

6. Power input voltage

range indicator

7. Power input port

(male 5-

pin shielded

M23 connector)

8. PWR1 LED: for

power input 1

9. PWR2 LED: for

power input 2

10.

FAULT LED

11.

MSTR/HEAD LED: for

ring master or chain

head

12.

CPLR/TAIL LED: for

ring coupler or chain

tail

13.

TP port’s 10/100

Mbps LED

14.

10/100BaseT(X)

port (M12 D-coded

4-pin female

connector)

15.

Waterproof vent

16.

Product label

17.

12 screw holes for

DIN r

ail mounting kit

18.

E2 LED: Down-side

E2 Gigabit port's

10/100/1000 Mbps

LED

19.

E1 LED: Down-side E1 Gigabit port's 10/100/1000 Mbps LED

20.

Gigabit Ethernet port E1 (corresponding to port 17 in the TN-5518

User’s Manual)

21.

Gigabit Ethernet port E2 (corresponding to port 18 in the TN-5518

User’s Manual)

ATTENTION

DO NOT open or remove the vent (#15). Once the seal has been

removed, the warranty

becomes invalid.

Exposed connectors (including 3, 5, and 14) when not in use

must be tightly covered with protective caps (an optional

accessory) to ensure IP54-rated protection.

www.ipc2u.ru

www.moxa.pro

- 6 -

Mounting Dimensions (unit = mm)

TN-5516A Series

www.ipc2u.ru

www.moxa.pro

- 7 -

TN-5516A-8PoE Series

www.ipc2u.ru

www.moxa.pro

- 8 -

TN-5518A Series

www.ipc2u.ru

www.moxa.pro

- 9 -

TN-5518A-8PoE

Panel/Wall Mounting

STEP 1:

Mounting the TN-5516A/5518A to a wall requires 4 screws. Use the

ToughNet switch as a guide to mark the correct positions of the 4 screws.

STEP 2:

se the 4 screws in the panel mounting kit. If you

would like to use your own screws, make sure the

screw head

is between 6.0 mm and 7.0 mm in

diameter and the shaft

is less than 4.0 mm in

diameter, as shown at the right.

Do not screw the screws in all the way—leave a space of about 2 mm to

allow room for sliding the ToughNet switch between the wall and the

screws.

NOTE

Before tightening the screws into the wall, make sure the screw

head and shaft size are suitable by inserting the screw through

one of the keyhole-shaped apertures of the ToughNet switch.

www.ipc2u.ru

www.moxa.pro

- 10 -

STEP 3:

Once the screws are fixed in the wall, hang the ToughNet switch on the 4

screws through the large opening of the keyhole-shaped apertures, and

then slide the switch downwards. Tighten the four screws for added

stability.

NOTE

To provide greater protection from vibration and shock, use

screws with shaft diameter between 6.0 mm and 7.0 mm, and fix

the ToughNet switch onto the wall directly through the large

opening of the keyhole-shaped apertures.

DIN Rail Mounting (optional)

You can use the optional DIN rail

mounting kit DK

-DC50131 (must

be purchased

separately) to

mount

the

TN-5516A/5518A on a 35 mm

DIN

rail.

STEP 1:

Use 12 screws (6 screws per plate)

to attach the two DIN

rail

attachment plates to the rear panel

of the switch.

STEP 2:

If the spring-loaded bracket is locked in place, push the recessed button

to release it. Once released, you should feel some resistance from the

spring as you slide the bracket up and down a few millimeters in each

direction.

STEP 3:

Position the ToughNet switch on

the

DIN

rail, tilting to hook clamps over

the top edge of the rail.

STEP 4:

Swing the switch down fully onto

the DIN

rail until both clamps

completely latch.

www.ipc2u.ru

www.moxa.pro

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Schalten Handbücher

Moxa Technologies

Moxa Technologies PT-G7509 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-4008 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-316 EtherDevice Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-205A series Montageanleitung

Moxa Technologies

Moxa Technologies PT-G7728 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TN-4516A non-PoE series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IKS-G6524A Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-G308 Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-205 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 1220 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-2005-ELP Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-208A series Handbuch

Moxa Technologies

Moxa Technologies TN-G6512 Serie Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-P206A-4PoE Series Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-518A Series Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-4012 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-P510 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PowerTrans PT-7728-F-24 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ToughNet TN-5816A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-2005-EL Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S8000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ToughNet TN-5516 Series Handbuch

Moxa Technologies

Moxa Technologies EDS-G308-T Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-4012 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung