Moxa Technologies TRC-190 Bedienungsanleitung

TRC-190 User’s Manual

Edition 3.1, August 2016

www.moxa.com/product

TRC-190 User’s Manual

The software described in this manual is furnished under a license agreement and may be used only in accordance with

the terms of that agreement.

Trademarks

The MOXA logo is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the part of

Moxa.

Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited

to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the

products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for

its use, or for any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas

Toll

-free: 1-888-669-2872

Tel:

+1-714-528-6777

Fax:

+1-714-528-6778

Moxa China (Shang

hai office)

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia

-Pacific

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045

Table of Contents

1. Introduction...................................................................................................................................... 1-1

Overview ...........................................................................................................................................1-2

Package Checklist ...............................................................................................................................1-2

Product Specifications .........................................................................................................................1-3

2. Slide-in Modules................................................................................................................................ 2-1

Installing or Removing Chassis Face Plate..............................................................................................2-2

Installing the Media Converter Slide-in Modules......................................................................................2-3

Replacing the Media Converter Slide-in Modules .....................................................................................2-4

3. Powering the TRC-190 ...................................................................................................................... 3-1

AC Power Supply Modules....................................................................................................................3-2

Optional Redundant Power Supply Module ......................................................................................3-2

Powering the AC Power Supply Module...........................................................................................3-3

DC Power Supply Modules....................................................................................................................3-3

Optional Power Supply Modules.....................................................................................................3-3

Powering the DC power supply module...........................................................................................3-4

Power Supply Module Installation .........................................................................................................3-4

Power Supply Module Replacement .......................................................................................................3-5

Power Supply Fuse Replacement (TRC-190-AC, power supply module only) ...............................................3-6

Replacing the Fuse ......................................................................................................................3-6

4. TRC-190 Rackmounting..................................................................................................................... 4-1

Installing the TRC-190 Chassis .............................................................................................................4-2

Grounding .........................................................................................................................................4-3

5. Troubleshooting ................................................................................................................................ 5-1

General Troubleshooting ......................................................................................................................5-2

1. Introduction

The following topics are covered in this chapter:



Overview



Package Checklist



Product Specifications

TRC-190 Introduction

1-2

Overview

Moxa’s NRack System includes the TRC-190-series, which is a 19-inch, rack-mountable chassis for selected

Moxa media converter slide-inmodules. The TRC-190-series allows the network administrator to connect

various copper and fiber-optic network media over protocols that include RS-232, RS-422, and RS-485.

Support for additional protocols will be available in the future. The TRC-190-series provides installation space

for up to 19 single-slot media converter slide-in modules in the front of the unit.

The TRC-190-series is equipped with an AC or DC power supply installed in the back of the chassis. An extra

installation space is available for an optional redundant power supply (AC or DC).

Last but not least, the TRC-190 also comes with a grounding lug to provide grounding for the chassis.

Package Checklist

The Moxa TRC-190-series products are shipped with the following items:

Standard Accessories

•TRC-190-series with one AC or DC power supply in the back of the chassis

•18 units of chassis face plates and screws

•Rackmount kit

•Power cord

•User’s manual

•Warranty card

Optional Accessories

•PWR-190-ACRedundant AC Power Supply Module

•PWR-190-DC-xx Redundant DC Power Supply Module

NOTE: Notify your sales representative if any of the above items are missing or damaged.

TRC-190 Introduction

1-3

Product Specifications

Physical Characteristics

Housing: SECC (1.2 mm)

Dimensions: 440 x260 x88 mm (17.32 x10.24 x3.46 in)

Weight: 5.2 kg (11.4 lb), with one power module installed

Number of Slots: 19 slots on the front for slide-in modules, 2slots at the back for power supply modules

Environmental Limits

Operating Temperature: 0 to 60°C (32 to 140°F)

Storage Temperature: -20 to 75°C (-4 to 167°F)

Ambient Relative Humidity: 5 to 95% (non-condensing)

Power Requirements

Input Voltage: Universal 100 to 240 VAC (47 to 63 Hz) or ±48 VDC (36 to 72 VDC and -36 to -72 VDC) or 220

VDC

Input Current: 3.2 A@36 VDC max.

Standards and Certifications

Safety: UL 60950-1, EN 60950-1

EMC: CE, FCC

EMI: EN 55022 Class A, FCC Part 15 Subpart BClass A

EMS:

EN 61000-4-2ESD: Contact: 4kV; Air: 8kV

EN 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m

EN 61000-4-4EFT: Power: 1kV; Signal: 0.5 kV

EN 61000-4-5Surge: Power: 1kV; Signal: 0.5 kV

EN 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m

EN 61000-4-8PFMF

EN 61000-4-11

Green Product: RoHS, CRoHS, WEEE

MTBF (mean time between failures)

Time: 1,055,112 hrs.

Standard: Telcordia (Bellcore), GB

Warranty

Warranty Period: 5years

Details: See www.moxa.com/warranty

2. Slide-in Modules

The following topics are covered in this chapter:



Installing or Removing Chassis Face Plate



Installing the Media Converter Slide-in Modules



Replacing the Media Converter Slide-in Modules

TRC-190 Slide-in Modules

2-2

Installing or Removing Chassis Face Plate

Install a chassis face plate over any unused slot by aligning the hole in the face plate with a threaded hole in

the chassis. Secure the face plate with the enclosed screw.

ATTENTION

Each slot in the TRC

-190-series chassis without a slide-in module installed MUST have a chassis face plate

covering the

empty slot for Class A compliance.

Remove the front plate by loosening the screw before installing any slide-in module. We suggest storing the

removed face plates together in case you need to use them again.

TRC-190 Slide-in Modules

2-3

Installing the Media Converter Slide-in Modules

ATTENTION

Wear a grounding device and observe electrostatic discharge precautions when installing or replacing the

media conve

rter slide-in modules into the chassis. Failure to observe this caution could result in damage to,

and subsequent failure of, the media converter slide

-in modules.

Instructions to install the media converter slide-in module into the TRC-190 chassis are as follows:

1. Slide-in modules can be installed in any empty slot of the chassis in any order.

2. The media converter slide-in module can be hot-swapped, which means the chassis doesn’t have to power

off during installation or when removing the module.

3. Before installing the slide-in module, make sure the front plate has been removed. Please refer to the

previous Installing or Removing Chassis Face Plate section.

4. Align the slide-in module with the chassis installation slot so that the panel fastener screw is at the top of

the module.

5. Carefully slide the slide-in module into the slot while aligning the module’s circuit board with the installation

guide.

6. Ensure the slide-in module is firmly seated inside the chassis.

7. Push in and rotate the attached panel fastener screw clockwise to secure the module to the chassis.

8. Repeat step 3 to 7 for any additional media converter slide-in module.

TRC-190 Slide-in Modules

2-4

Replacing the Media Converter Slide-in Modules

To replace a media converter slide-in module in the TRC-190 chassis:

1. The media converter slide-in module can be hot-swapped, which means the chassis doesn’t have to power

off during the installation or when removing the module.

2. Remove the slide-in module to be replaced by loosening the panel fastener screw that secures the module

to the chassis. Slide the module out from the chassis.

3. Align the replacement slide-in module with the chassis installation slot so that the panel fastener screw is

at the top of the module.

4. Carefully slide the slide-in module into the slot while aligning the module’s circuit board with the installation

guide.

5. Ensure the slide-in module is firmly seated inside the chassis.

6. Push in and rotate the attached panel fastener screw clockwise to secure the module to the chassis.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Schalten Handbücher

Moxa Technologies

Moxa Technologies ToughNet Switch TN-5500 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-P510A-8PoE Series Handbuch

Moxa Technologies

Moxa Technologies EDS-408A Bedienungsanleitung

Moxa Technologies

Moxa Technologies PT-7710 Series Handbuch

Moxa Technologies

Moxa Technologies EDS-516A Series Handbuch

Moxa Technologies

Moxa Technologies PT-7528 Handbuch

Moxa Technologies

Moxa Technologies TN-5308-LV Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-828 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PT-510 Series Handbuch

Moxa Technologies

Moxa Technologies EOM-104 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies S9450I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-P506E-4PoE Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IKS-6726-8PoE Series Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-728 Series Handbuch

Moxa Technologies

Moxa Technologies PT-7324 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-G512E-8PoE Handbuch

Moxa Technologies

Moxa Technologies PowerTrans PT-508-MM-ST-48 Bedienungsanleitung

Moxa Technologies

Moxa Technologies PT-7728 Series Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-405A-PTP Series Handbuch

Moxa Technologies

Moxa Technologies MDS-G4000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies SDS-3016 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-4012 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PowerTrans PT-7728-F-24 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-518A Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung