Moxa Technologies UPORT 1200 series Bedienungsanleitung

— 1 — — 2 — — 3 —

1200/1400/1600

USB-to-Serial Hub

Quick Installation Guide

Second Edition, November 2006

1. Overview

UPort is the brand name of MOXA’s new USB-to-serial product line,

which provides a wide range of products and solutions to extend

Windows COM ports via the PC’s USB port. Important features of UPort

products include support for hi-speed (480 Mbps) USB 2.0, Moxa CPU,

Moxa UART, the ability to assign COM port numbers, magnet

accessories, and mini female DB9 to terminal block. These features make

the UPort products easy to use and maintain.

The UPort 1200/1400/1600 line of USB-to-serial hubs includes the

following models:

•UPort 1250 2-port RS-232/422/485 USB-to-serial hub

•UPort 1250I 2-port RS-232/422/485 USB-to-serial hub w/

isolation protection

•UPort 1410 4-port RS-232 USB-to-serial hub

•UPort 1450 4-port RS-232/422/485 USB-to-serial hub

•UPort 1450I 4-port RS-232/422/485 USB-to-serial hub w/

isolation protection

•UPort 1610-8 8-port RS-232 USB-to-serial hub

•UPort 1650-8 8-port RS-232/422/485 USB-to-serial hub

•UPort 1610-16 16-port RS-232 USB-to-serial hub

•UPort 1650-16 16-port RS-232/422/485 USB-to-serial hub

Before connecting the UPort USB-to-serial hubs to your computer’s USB

port, we recommend installing the UPort driver first. To do this, follow

the installation procedure described in Section 3.

The installation procedure described in Section 3 was done on a PC

running Windows 2000 (x86). Windows XP and 2003 (32-bit and 64-bit)

driver installations are the same. UPort can be connected to any upstream

type AUSB port that is on the PC host or on an upstream hub. UPort is

hot pluggable, and therefore there is no need to power down your

computer prior to installation.

After installing the driver, connect the UPort to an upstream host or hub.

The Found New Hardware wizard will locate the appropriate drivers

automatically. Once the drivers are found, various windows will pop up

as UPort’s serial port is being installed.

When the Found New Hardware wizard finishes installing UPort, use

the operating system’s Device Manager to check and/or modify the port

settings. The new COM port will be listed under Ports (COM & LPT).

2. Package Checklist

Before installing the UPort, verify that the package contains the following

items:

•UPort 1200/1400/1600 USB-to-serial hub

•1 USB cable

•Document and Software CD-ROM

•UPort 1200/1400/1600 Quick Installation Guide

•Power adaptor (for UPort 1200/1450I/1600-8) or power cord (for

UPort 1600-16)

Notify your sales representative if any of the above items are missing or

damaged.

3. Installing the UPort 1200/1400/1600 Driver

1. Run the Setup program located on the UPort 1200/1400/1600

Document and Software CD-ROM. Click Next to Start installing the

driver.

2. Click Next to install the driver in the indicated folder.

3. Click Install to proceed with the installation.

P/N:1802014000100

— 4 — —5 — — 6 —

4. The next window that opens cautions you that although this software

has not passed Windows logo testing, this driver has already been

tested and shown that it can support the Windows OS. Click Continue

Anyway to proceed. Then, click Finish to complete the driver

installation.

4. Installing the UPort 1200/1400/1600 Hardware

WARNING

1. This unit is not meant to be sold to consumers. It will only be shipped

to manufacturers or factories.

2. The DC source should come from an external adapter or 12 to 48 VDC

source (not from DC mains) by using a transfer device.

3. This unit should be installed or set up by a qualified service person.

1. Power on UPort 1200/1400/1600

UPort

1250 UPort

1250I UPort

1410 UPort

1450 UPort

1450I UPort

1600-8 UPort

1600-16

Bus

Power √--- √√--- --- ---

External

Power --- √--- --- √√√

2. Connect the UPort to the PC using the USB cable.

3. After powering on your PC, Windows 2000/XP/2003 will

automatically detect the UPort 1200/1400/1600.

4. Click Next to Start the installation.

5. Select Install the software automatically (Recommended).

6. The next window that opens cautions you that although this software

has not passed Windows logo testing, this driver has already been

tested and shown that it can support Windows OS. Click Continue

Anyway to proceed. Then, click Finish to complete the driver

installation.

7. Repeat steps 4 to 6 till all COM ports are installed.

5. Serial Port Pin Assignments

UPort 1200/1400/1600’s serial ports use male DB9 connectors. Refer to

the following table for the RS-232 and RS-422/485 pin assignments.

Male DB9 Pin RS-232 RS-422/

4-wire RS-485 2-wire

RS-485

1 DCD TxD-(A) ---

2 RxD TxD+(B) ---

3 TxD RxD+(B) Data+(B)

4 DTR RxD-(A) Data-(A)

5 GND GND GND

6 DSR --- ---

7 RTS --- ---

8 CTS --- ---

Power Input Specifications

UPort 1250: 5 VDC (bus power)

UPort 1250I: 12 to 48 VDC

UPort 1400: 12 to 48 VDC (external) or 5 VDC (bus power)

UPort 1600-8: 12 to 48 VDC

UPort 1600-16: 100 to 240 VAC

Moxa Technologies Co., Ltd.

Reproduction without permission is prohibited.

Tel: +886-2-8919-1230

www.moxa.com

Fax: +886-2-8919-1231

[email protected]

Andere Handbücher für UPORT 1200 series

Dieses Handbuch passt für folgende Modelle

Andere Moxa Technologies Schalten Handbücher

Moxa Technologies

Moxa Technologies EtherDevice EDS-518A Series Handbuch

Moxa Technologies

Moxa Technologies IEX-408E-2VDSL2 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TN-5516A Series Handbuch

Moxa Technologies

Moxa Technologies PowerTrans PT-7528-24TX-WV Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-4014 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TN-4516A non-PoE series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NSwitch Outdoors Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 400A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-P510 Series Handbuch

Moxa Technologies

Moxa Technologies PT-7728 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1200 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PT-7710 Series Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-G205A-4PoE-1GSFP Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-510A Series Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-30 Handbuch

Moxa Technologies

Moxa Technologies TN-5305-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies TN-5510A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IKS-6728-8PoE Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-505A Handbuch

Moxa Technologies

Moxa Technologies ToughNet TN-5510-2GLSX-ODC Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-518A Series Handbuch

Moxa Technologies

Moxa Technologies PT-G7728 Bedienungsanleitung

Moxa Technologies

Moxa Technologies PT-7728 Series Handbuch

Moxa Technologies

Moxa Technologies PT-7828 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung