Mpow BH129C Bedienungsanleitung
Bluetooth Music Receiver
User Manual · Le mode d'emploi
Istruzioni · Manual de usuario
www.xmpow.com
English--------------------- 02
Deutsch-------------------- 13
Français ------------------- 23
Italiano -------------------- 33
Li-Po 180mAh
-02- -03-
Frequency Range 2.402-2.48GHz
Output Power Category Class 1
Bluetooth Mode HFP/HSP/A2DP/
AVRCP
Bluetooth Range up to 30 feet
Power Supply
Charge voltage DC 5.0v
Product Diagram
1. Power ON/OFF
2. Audio Output
3. Micro USB Charging Port
4. Microphone
5. Previous Song/Volume Down
6. Next Song/Volume Up
7. Indicator Light
8. Play/Pause; Answer/Hang up
1
2
3
4
5
6
7
8
Specications
ENGLISH
www.xmpow.com
-04- -05-
Connect Two Smart Devices
Power On/O
Pair To Your Device
Power on
Turn the power switch to “ON” side, this receiver
will power on automatically. Red light will stay
on for 1s then the red and blue lights ash
alternately.
Power o
Turn the power switch to “OFF” side, red light
will stay on for 1s and then this receiver will
power o automatically.
Note:If there is no operation or connection after
the product powers on, it will automatically
enter sleep mode after 10 minutes. Short press
“ ” button for 1 second to wake it up.
When the product disconnects with the mobile
phone, it will automatically enter sleep mode
after 20 minutes. Short press “ ” button for 1
second to wake it up.
For the rst time using the receiver, you should
pair it to your smart device rst.
1. Power on the receiver, it will enter into pairing
mode. The red and blue lights ash alternately.
2. Turn on the Bluetooth function of your smart
device.
3. Search for the Bluetooth device “BH129” and
connect to it.
4. Enter the code “0000” if needed. If it pairs
successfully, the indicator light will blink once
every two seconds.
5. Connect the receiver to your non Bluetooth
headphone/Home Speakers or Car Stereo
System with 3.5mm audio cable.
6. Now you can enjoy music through your
Headphone, Speakers, Stereo System, or
answer hands-free calls after connecting with
smart phones.
1. Pair the Bluetooth receiver to the rst device.
2. After successfully pairing, turn o the
Bluetooth function of the rst device.
3. The receiver will enter pairing mode again.
-06- -07-
· Short press the button “ ”, hang up the rst
call and answer to the new call.
·
Long press the button “ ” for about 1s, hang on
the rst call and answer the new call.
HANDS-FREE CALL
Answer A Call
1. When there is a incoming call, short press the
button “ ” to answer it.
When get through, long press “ ”for 1s that
you can choose to answer the call through
Bluetooth or phone.
2. If there is a second incoming call while you
are speaking:
Reject A Call
End A Call
Redial The Last Called Number
Long press the button “ ” for about 1s.
Short press the button “ ” or just hang up
your phone.
Double press the button “ ” to redial the last
called number.
Play Music
1. Play/Pause: Short press the button “ ”
2. Next Song: Short press the button “ +”
3. Previous Song: Short press the button “ -”
4. Volume Up: Long press the button “+”
5. Volume Down: Long press the button “ -”
Note: When the receiver is on，it will connect to
the last connected device automatically. (Please
make sure the Bluetooth function of your device
is enabled before turning on the receiver.)
4. Pair the Bluetooth receiver to the second
device.
5. After successfully paring, turn on the
Bluetooth function of the rst device. Select
the “BH129” and click “connect”.
6. Two devices will both connect the Bluetooth
receiver at the same time.
-08- -09-
Charge The Receiver
When the receiver is in low power state, it will
alarm automatically that the red light ashes 15
times quickly. After that, the red light will ash
once every two seconds instead. In this case,
please charge it through USB charging port with
DC 5V power supply input. During charging
the red indicator will stay on. When it nishes
charging, the red indicator will go o.
FAQ
Q1: The product can’t pair with the Bluetooth
of your smart device.
1. Please make sure the product have entered
pairing mode.
2. Make sure there is only one Bluetooth
enabled device around you.
3. Wipe out the paring history of your Bluetooth
enabled devices and receiver, then try again.
Q2: The Bluetooth range or the sound quality
is not good.
1. Bluetooth signal can be blocked by
surrounding objects and reduce the audio
quality, please put it in the right position
without barrier between receiver and your
smart devices.
2. Wipe out the paring history of the product,
then try again.
Voice Assistant
Long Press the “ ” button for about 1s to start
or end voice assistant function.
Wipe Out Bluetooth Connection History
When the receiver is o, long press the button
“ ” for about 8s, the system will wipe out the
Bluetooth Connection history.
Note: You can only wipe out the audio
connection history of the receiver through this
operation. Can’t wipe out the Bluetooth history
of your smart devices.
-10- -11-
FCC STATEMENT
1. This device may not cause harmful
interference, and
2. This device must accept any interference
received, including interference that may
cause undesired operation.
This device has been evaluated to meet
general RF exposure requirement. The device
can be used in portable exposure condition
without restriction.
Note 1:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance
with
the instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment o and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit dierent from that to which the receiver
is connected.
•Consult the dealer or an experienced radio/TV
technician for help.
\An\\y changes or modifications to this unit not
\expressly approved by the party responsible for
\compliance could void the user's authority to
\operate the equipment.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
Note 2:
Li-Po 180mAh
-12- -13-
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical& Electronic Equipment)
This Marking shown on the product or its
literature, indicate that it should not be
disposed with other household wastes at the
end of its working life.
To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
please separate this from other types of wastes
and recycle it responsibly to promote the
sustainable reuse of material resources.
Household user should contact either the retailer
where they purchased this product, or their local
government oce, for details of where and how
they can take this item for environmentally safe
recycling.
Business users should contact their supplier and
check the terms and conditions of the purchase
contact. This product should not be mixed with
other commercial wastes for disposal.
Frequenzbereich 2.402-2.48GHz
Kategorie der
Ausgangsleistung
Klasse 1
Bluetooth Modus HFP/HSP/A2DP/
AVRCP
Bluetooth Bereich bis zu 30 Fuß
Stromversorgung
Ladespannung DC 5.0V
Spezikationen
DEUTSCH www.xmpow.com
-14- -15-
Diagramm des Productes
1. Leistung ON/OFF
2. Audio Output
3. USB Ladeanschluss
4. Mikrofon
5.Vorheriges Lied/ Lautstärke runter
6. Nächstes Lied/ Lautstärke hinauf
7. Kontrolllampe
8. Spiel / Pause; Antwort / Auegen
1
2
3
4
5
6
7
8
Leistung ON/OFF
Leistung ON
Sie schalten den Netzschalter auf "ON", wird
dieser Empfänger automatisch einschalten. Das
rote Licht bleibt für 1s, dann blinken das rote
Licht und blaues Licht abwechselnd.
Leistung OFF
Sie schalten den Netzschalter auf die"OFF" Seite,
bleibt das rote Licht für 1s und dann wird dieser
Empfänger automatisch ausgeschaltet.
Hinweis:Wenn nach dem Einschalten des
Geräts keine Funktion oder Verbindung besteht,
wechselt das Gerät nach 10 Minuten automatisch
in den Energiesparmodus. Drücken Sie kurz
die Taste " " für 1 Sekunde,um es wieder zu
aktivieren.
Wenn sich das Produkt vom Mobiltelefon trennt,
wechselt es nach 20 Minuten automatisch in den
Schlafmodus. Kurz drücken Sie die Taste " "
für 1 Sekunde, um es aufzuwecken.
-16- -17-
Zwei Smart Geräte verbinden
1. Sie können den Bluetooth-Empfänger mit dem
ersten Gerät paarung.
2. Nach erfolgreicher Paarung schalten Sie die
Bluetooth-Funktion des ersten Gerätes aus.
3. Der Empfänger wird wieder in den
Paarungsmodus eingeben.
4. Sie paaren den Bluetooth-Empfänger zu dem
zweiten Gerät.
5. Nach erfolgreicher Paarung schalten Sie die
Bluetooth-Funktion des ersten Gerätes ein. Sie
wählen "BH129" und klicken auf " connect ".
6. Zwei Geräte können den Bluetooth-
Empfänger gleichzeitig verbinden.
Hinweis:Wenn der Empfänger eingeschaltet
ist, wird er automatisch mit dem zuletzt
angeschlossenen Gerät verbinden. (Bitte stellen
Sie sicher, dass die Bluetooth-Funktion Ihres
Geräts aktiviert ist, bevor Sie den Empfänger
einschalten.)
Zu Ihrem Gerät paaren
Zum ersten Mal mit dem Empfänger benutzen,
sollten Sie es zuerst zu Ihrem Smart-Gerät
paaren.
1. Sie schalten den Receiver ein, wird es in den
Paarungsmodus eintreten. Das rote und blaue
Licht blinken abwechselnd.
2. Sie können die Bluetooth Funktion Ihres
Smart-Geräts einschalten.
3.
Sie suchen nach dem Bluetooth-Gerät "BH129"
und verbinden es.
4. Wenn Sie den Bedarf haben, können Sie den
Code“0000” eingeben. Wenn es erfolgreich
paart, blinkt die Kontrolllampe einmal jede
zwei Sekunden.
5. Sie können den Receiver mit Ihrem Bluetooth
Kopfhörer / Hause-Lautsprecher oder Auto
Stereo-System mit 3,5 mm Audiokabel
verbinden.
6. J
etzt können Sie die Musik durch Ihren Kopfhörer,
Lautsprecher, StereoSystem genießen, oder Sie
können nach der Verbindung mit Smartphones
die Freisprechanlage beantworten.
Inhaltsverzeichnis
Sprachen:
Andere Mpow Empfänger Handbücher
Mpow
Mpow BH051B Bedienungsanleitung
Mpow
Mpow BH129 Bedienungsanleitung
Mpow
Mpow BH129B Bedienungsanleitung
Mpow
Mpow Streambot 2-In-1 Bedienungsanleitung
Mpow
Mpow BH298A Bedienungsanleitung
Mpow
Mpow MPBH070AB Bedienungsanleitung
Mpow
Mpow BH182A Bedienungsanleitung
Mpow
Mpow BH044D Bedienungsanleitung
Mpow
Mpow BH259A Bedienungsanleitung
Mpow
Mpow BH100C Bedienungsanleitung
