MrHeater F235350 Montageanleitung

XCW20

WARNING: If the information in this manual is not followed exactly, a fire or explosion

may result causing property damage, personal injury or loss of life.

– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any

other appliance.

– An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance

– WHAT TO DO IF YOU SMELL GAS

• Do not try to light appliance

• Extinguish any open flame

• Shut off gas to appliance

BATTERY OPERATED SHOWER SYSTEM

Fully Portable Instant Hot Water/Shower

2015

OPERATING INSTRUCTIONS AND OWNERÊS MANUAL

READ INSTRUCTIONS CAREFULLY: Read and follow all instructions. Place instructions in a safe

place for future reference. Do not allow anyone who has not read these instructions to assemble,

light, adjust or operate the shower.

Model #

Battery Operated Shower System

CARBON MONOXIDE HAZARD

•This appliance can produce carbon monoxide which has

no odor

•Using it in an enclosed space can kill you.

•Never use this appliance in an enclosed space such as a

camper, car or home

(Propane Cylinder Not Included)

DANGER

Basecamp, Inc. | Portable Shower Operating Instructions and OwnerÊs Manual

CONTENTS

WARNINGS................................................................................. 2

SHOWER SPECIFICATIONS........................................................... 3

OPERATING PRECAUTIONS.......................................................... 4

SAFETY PRECAUTIONS................................................................ 4

OPERATING INSTRUCTIONS ........................................................ 4

MAINTENANCE, STORAGE AND SERVICE ................................... 6

WIRING DIAGRAM...................................................................... 7

TROUBLESHOOTING.................................................................... 8

EXPLODED VIEW......................................................................... 9

PARTS LIST.................................................................................10

WARNING:

• NOT FOR HOME OR RECREATIONAL VEHICLE USE.

• THE WATER HEATER IS FOR POINT OF USE, FOR

TEMPORARY WATER HEATING AND NOT FOR CON-

NECTION TO A PERMANENT INLET WATER CONNEC-

TION OR FOR CONNECTION TO A WATER DISTRIBU-

TION SYSTEM TO SUPPLY MULTIPLE OUTLETS.

• DO NOT OPERATE HEATER WHERE FLAMMABLE

LIQUIDS OR VAPORS MAY BE PRESENT.

• USE THE PRESET REGULATOR THAT IS INSTALLED.

DO NOT ATTEMPT TO ADJUST.

• NEVER INSTALL OR REMOVE PROPANE TANK WHI-

LE HEATER IS OPERATING, NEAR FLAME, OTHER

IGNITION SOURCES OR WHILE HEATER IS HOT TO

THE TOUCH

WARNING:

YOUR SAFETY IS IMPORTANT, SO PLEASE READ THESE INSTRUCTIONS

BEFORE YOU OPERATE.

PORTABLE HOT WATER/SHOWER:

•THIS APPLIANCE IS NOT INTENDED FOR THE SUPPLY

OF DRINKING WATER. HEALTH RISKS CAN OCCUR IF

WATER IS CONSUMED INTERNALLY

• THIS APPLIANCE IS INTENDED FOR THE SUPPLY OF

HEATED WATER FOR THE PURPOSE OF WASHING AND

CLEANING ONLY.

• CHECK AND CONFIRM SAFE WATER TEMPERATURE

BEFORE USING THIS APPLIANCE. WATER FROM THIS

APPLIANCE MAY BE VERY HOT.

THIS MANUAL CONTAINS IMPORTANT INFORMATION ABOUT THE AS-

SEMBLY, OPERATION AND MAINTENANCE OF THIS PORTABLE SHOWER.

SAFETY PRECAUTIONS ARE ESSENTIAL WHEN ANY MECHANICAL OR

PROPANE FUELED EQUIPMENT IS INVOLVED. THESE PRECAUTIONS

ARE NECESSARY WHEN USING, STORING AND SERVICING.

FOLLOWING THESE SAFETY ALERTS WILL REDUCE THE POSSIBILITY

OF PERSONAL INJURY OR PROPERTY DAMAGE.

PROPANE CYLINDERS MUST BE DISCONNECTED WHEN THE

SHOWER IS NOT BEING USED OR WHEN STORING THE SHOWER.

CYLINDERS MUST BE STORED OUTDOORS, IN A WELL VENTILATED

SPACE OUT OF THE REACH OF CHILDREN.

THE STATE OF CALIFORNIA REQUIRES THE FOLLOWING WARNINGS:

WARNING: COMBUSTION BY-PRODUCTS PRODUCED WHEN

USING THIS PRODUCT CONTAIN A CHEMICAL KNOWN TO

THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH

DEFECTS (OR OTHER REPRODUCTIVE HARM).

WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN

TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH

DEFECTS OR OTHER REPRODUCTIVE HARM.

DANGER

HOT

BURN

•Water temperature

over 125°F(52°C) can

cause severe burns

instantly or death

from scalds.

•Children, disabled

and elderly are at

highest risk of being

scalded.

•See instruction

manual before set

ting temperature at

water heater.

•Feel water before

bathing or

showering.

Never store propane

near high heat, open

flames, pilot lights,

direct sunlight, or other

ignition sources or

where temperatures

exceed 120°F (49°C)

During operation this

product can be a source

of ignition. Never use this

appliance in spaces that

contain or may contain

volatile or airborne

combustibles, or prod-

ucts such as gasoline,

solvents, paint thinners,

dust particles or un-

known chemicals

EXPLOSION-FIRE

HAZARD

Clearance to Combustibles:

Model: TOP & FRONT Sides Rear

XCW20 48‰ 12‰ 12‰

DANGER

Basecamp, Inc.| Portable Shower Operating Instructions and OwnerÊs Manual

SPECIFICATIONS

UNPACKING and ASSEMBLING

1. Remove heater from carton.

2. Remove all protective material which may have been applied

to the heater for shipment.

3. Check the appliance for possible shipping damage and

straighten out all hoses to remove any kinks or twists.

4. Install handle assembly by screwing it into place.

5. Attach the supplied regulator by rotating the t-wing nut in a

„clockwise‰ direction carefully not to over tighten.

6. Attach the 1 LBS. LP cylinder to the regulator by rotating in a

„clockwise‰ direction. Only use LP cylinders with proper fuel

type approved for the appliance. Check for gas leaks with

soapy water.

DO NOT USE A FLAME TO CHECK FOR LEAKS.

CAUTION: Certified for use only with LP-gas cylinders of the U.S. Department of Transportation (DOT) or Transport Canada,

CAN/CSA B339.

Model: XCW20

(F235350)

Rating: BTU 10,000 -18,000

Battery 5.0Ah Sealed

Lead Acid Internal

Battery

Run Time (Full Charge) 40 minutes

Fuel Source Propane

Fuel Supply Pressure

(to regulator):

Max. Bottle

Pressure

Gas Supply Pressure

(Regulator out):

11‰ WC

Electrical Input

115V, 60 Hz, 1±, 2A

Min. Operating

Voltage:100V

230 Watts (W)

FUSE 3AL 250V

High Temperature Control: 125°(F)

Temperature Rise 42°(F)

Ignition Electronic Spark

DIMENSIONS

Model: Length(in) Width(in) Height(in) Weight(LBS)

XCW20 19 1/2‰

(w/Handle Attached)

10 1/2‰ 13‰ 22 lbs.

Handle Assembly

Pump Quick Connect Inlet Connection

Regulator

Assembly

Basecamp, Inc. | Portable Shower Operating Instructions and OwnerÊs Manual

OPERATING PRECAUTIONS

Propane is heavier than air. If propane leaks from a connection or

fitting, it sinks to the floor, collecting there with the surrounding

air, forming a potentially explosive mixture. During set up check

all connections and fittings for leaks using soapy water. Never use

flame. Bubbles indicate a leak. Check that the connection is not

cross threaded and that it is tight. Perform another leak check. If

there is still a leak, remove the cylinder and contact Mr. Heater

direct for service or repair.

• Use for water heating only. Never alter in anyway or use with

any device or part not expressly approved by Mr. Heater.

• This appliance is designed to be used with a source water

temperature of 60°°F or below

•The maximum temperature rise from the appliances is 35À F

to the shower head and 42À F from the source water

temperature.

• For safety the appliance is designed to shut off the burner

when the water temperature from either of the outlets

reaches 122°F/50°C

• The average run time for the XCW20 from a fully charged

battery is 30 - 40 mins before it will require recharging

• During operation ensure that all air inlets and exhaust

(front,sides and back) are kept free from obstructions and

closure.

SAFETY FEATURES

This appliance is equipped with the following safety

features:

• Over Temperature Sensor – the appliance will not

allow the burner to remain in operation once the outlet

water temperature reaches 122ÀF/50°C.

• Water Flow Sensor – water must be flowing through

the system to allow the burner to ignite. In the case

that the water supply is restricted or ceases, the burner

will be extinguished and will not relight.

• Tilt Switch – in the event that the appliance is tilted past 30°

during operation the appliance will shut down until it is

located on a level surface.

CONTROL PANEL

OPERATING SHOWER INSTRUCTIONS

1. Attach the Quick Connect Fitting for the pump on the

backside of shower unit (FIG. 1) and attach the shower

head hose Quick Connect Fitting on the front side of shower

unit (FIG. 2).

2. Submerge the pump in a suitable reservoir of water. The pump

motor can be damaged if it is not fully submerged in water

while in use.

DO NOT use water from rivers or lakes.Sediment can damage

the pump and the appliance. DO NOT use in ocean because

salt water can damage the pump and appliance.

WARNING: This appliance will not heat the water enough to

kill potentially dangerous microbes. DO NOT use this appliance

for potable water.

3. Screw propane clockwise into shower unit regulator.

4. Press the Power button, the unit will switch on and the shower

head OUTLET icon will automatically be selected on the control

panel.(FIG. 3) Make sure the shower is fully charged. Ensure

that the Switch on the shower head is in the „Open‰ position

by sliding the switch downwards. (FIG. 4)

AIR INLETS

AND

EXHAUST

PUMP INPUT

PUMP

Quick-Connect

SHOWER HEAD

Quick-Connect

Switch

FIG. 1 FIG. 2

Battery Level Indicator Outlet Indicator

System On / Off

Pump On / Off

Switch Between

Shower head

and Faucet

Output Temp ControlWater Outlet Temp

Burner “ON” Indicator

Water Inlet

Temp

Over-

Temp

Indicator

FIG. 3 FIG. 4

Basecamp, Inc.| Portable Shower Operating Instructions and OwnerÊs Manual

5. Position the Output Temp Control Dial to the central position.

Depress the Pump button,the electronic ignition should be

heard igniting the burner. When the unit is ignited the Burner

icon on the control panel will illuminate and outlet water

temperature readout will increase. (FIG. 5)

6. Take care to measure the temperature of the water from the

shower head, the temperature can be adjusted by turning the

„ Outlet Temperature Control Dial „ until the desired level is

reached.

7. The water flow can be stopped at any time by sliding the

Switch to the „OFF‰ position (upwards). (FIG. 6) The burner

will extinguish and the pump will continue to operate for 5

minutes. To reignite the burner slide the Switch back to the

„OPEN‰ position (downwards), water will flow from shower

head and the burner will reignite within 5 to 10 seconds

IMPORTANT – Water remaining in the heat exchanger while the

flow is stopped may become hot. When the flow is resumed the

user must check the temperature output to ensure that it is

suitable and not too hot. Test water temperature before bathing

children or pets.

8. Once finished with the appliance slide the Switch to the

„OFF‰ position and depress the Pump button to stop the flow

of water to the appliance.

OPERATING FAUCET INSTRUCTIONS

1. Press the power button and once the unit is ON depress the

Shower Head / Faucet button until the Faucet LED„Outlet‰

indicator lights on the LED control panel. (FIG. 7)

2. Swing the faucet away from its storage position and locate

towards the side of the appliance and locate a basin or bucket

beneath and locate the water flow to the central position.

(FIG 8.)

3. Position the „ Outlet Temperature Control Dial „in the Max posi-

tion then press the „Pump‰ button, water will start to flow within a

few moments.

4. The electronic ignition should be heard igniting the burner,

when lit the „Burner‰ icon on the display will illuminate and

the outlet water temperature read out will increase. (FIG. 5)

5. The water temperature can be adjusted by moving the „Output‰

Temp Control Dial knob between „Min & Max‰ or at the „Flow‰

valve at the Faucet. Turning the flow dial counterclockwise will

reduce the flow and cause the water temp to increase. Turning

the flow dial clockwise will increase the flow and cause the water

to decrease.

6. The shower head hose can also be attached to the Faucet by con-

necting the quick connection from hose onto the Faucet outlet.

(FIG. 10)

Switch

OFF

FIG. 9

FIG. 5

FIG. 6

FIG. 7

FIG. 8

(FIG. 9)

Fig. 10

Basecamp, Inc. | Portable Shower Operating Instructions and OwnerÊs Manual

APPLIANCE POWER & CHARGING

1. The appliance is fitted with a 15V 5A/h battery pack and can

be recharged with the AC or DC adaptors /supplied.

2. AC: Connect the 120V AC adapter to the appliance then con-

nect the 3 pin AC plug to a suitable outlet (FIG. 5)

3. DC: Connect the 12V DC adapter to the appliance then con-

nect to a suitable outlet with the cigarette lighter (FIG. 5)

•To charge the unit using the DC connector the car must be

running, due to the 12V direct link to the battery system it

will not show on the LED indicator.

•The unit will run directly from the 12V cigarette lighter but

will not charge unless vehicle is running.

• DO NOT– Modify the adaptors supplied with the appliance.

• Charge time from either power source is 4 hours.

• IMPORTANT – If the appliance is not being used or is stored

it must be recharged every three months to guarantee

the battery life expectancy.Failure to do so may result in

battery failure.

STORAGE

WARNING: To prevent personal injury unplug the appliance from

any electrical outlets.

STORING

1. Press the „Power‰ button & turn the appliance off.

2. Disconnect all hoses and hold vertically allowing all excess wa-

ter to drain from them. Check that the shower head Switch is

in the „ON‰ position to allow water to drain.

3. Return the faucet to its locked position.

4. Unscrew the LP cylinder from the appliance

5. Unscrew the drain plug which is located on the underside,

tipping the unit back and forth to drain excess water from the

heat exchanger.

Using warm soapy water with a mild detergent wipe down all sur-

faces and areas of the appliance. DO NOT submerge the appliance

in a sink or bowl. DO NOT use abrasive cleaners or bleach. DO

NOT run soapy water through the heat exchanger.

AC INPUT

DC INPUT

FUSE

Fig. 5

Basecamp, Inc.| Portable Shower Operating Instructions and OwnerÊs Manual

WIRING DIAGRAM

CAUTION: Label all wires prior to disconnecting when servicing controls. Wiring errors can cause improper and dangerous operation.

The parts lists and wiring diagram show the appliance as it was constructed. Do not use a heater which is different from that

shown. Service should be done by qualified service technician. Verify proper operation of unit after servicing.

Basecamp, Inc. | Portable Shower Operating Instructions and OwnerÊs Manual

TROUBLESHOOTING

PROBLEM SOLUTION

Water will not flow

from shower head

Check that pump debris filter is not clogged

Check that appliance is switched on

Check sufficient water is available

Check that the pump is connected to the appliance

Make sure the battery is charged

Check for kinks in shower hose

Check that pump fuse is not blown

Check that the shower head ON/OFF switch is in the open position

Burner will

not light

Check that there is gas in cylinder

Check that the water is flowing from shower head

Check that water is not over temperature

Check that battery does not require re-charging

Check the Flow Switch on shower head make sure it is fully open

Water is not

hot enough

Check gas control

Check source water temperature (water temps below 50°F might require recirculation)

Cycle the water through the system back in to the source reservoir then through the appliance again

Reduce flow using the flow valve

LED DIAGNOSTIC

E0 Inlet Temperature Sensor Failure

E1 Flame Sensor Error

E2 Water Flow Error

E3 Unsuccessful Ignition/Flame Out

E4 Outlet Temperature Sensor Fault

E6 Back Up Water Temperature High Limit Fault

(131°F, 55° C)

E7 Primary Water Temperature High Limit Switch Fault

(122°F, 50°C)

Basecamp, Inc. | Portable Shower Operating Instructions and OwnerÊs Manual

Item # Description MODEL: XCW20

Part Number QTY

1 High Limit Switch 35526 1

2 Igniter 35548 1

3 Control, Charging Shower 35550 1

4 Switch, Tip over 35546 1

5 Ignition Electrode 35530 1

6 Ignition Electrode 35551 1

7 Switch, Flow, Water 35552 1

8 Handle Assembly 35545 1

9 Faucet(Faucet) Assembly 35553 1

10 Regulator Assembly 35534 1

11 Drain Plug 35536 1

12 Knob, Control 35537 1

13 Fuse 35554 1

14 Power Supply 35557 1

15 Pump Assembly 35558 1

16 Label, Control Panel 35559 1

17 Board LED 35560 1

18 Tube, Gas Inlet 35561 1

19 Valve, Water 35562 1

20 Probe, Water, Temp, Outlet 35563 1

21 Tube, Gas Outlet 35564 1

22 Tube, Water Outlet 35565 1

23 Controller 35566 1

24 Socket, Pump Assembly 35567 1

25 Socket, Charging 35568 1

26 Socket, DC outlet 35574 1

27 Brackt, Faucet Fastening 35569 1

28 Battery, 12V 35570 1

29 Cover, Battery 35571 1

30 Charger,Car D/C 35572 1

31 Shower Head 35573 1

PARTS LIST

ACCESSORIES

F273701 5ft Propane Hose Assembly (Swivel 1”-20 Male Throwaway Cylinder Thread X POL w/ Handwheel)

F273704 10ft Propane Hose Assembly (Swivel 1”-20 Male Throwaway Cylinder Thread X POL w/ Handwheel)

F273702 12ft Propane Hose Assembly (Swivel 1”-20 Male Throwaway Cylinder Thread X POL w/ Handwheel)

OPERATING INSTRUCTIONS

AND OWNER’S MANUAL

Model #

WARNING:

USE ONLY MANUFACTURERÊS REPLACEMENT PARTS. USE OF ANY OTHER PARTS

COULD CAUSE INJURY OR DEATH. REPLACEMENT PARTS ARE ONLY AVAILABLE

DIRECT FROM THE FACTORY AND MUST BE INSTALLED BY A QUALIFIED SERVICE

AGENCY.

ANSI Z21.96-2014•CSA B11.6-2014

XCW20

If you’re looking for quality hvac & refrigeration, visit our website.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MrHeater Boiler Handbücher

MrHeater

MrHeater BOSS XCW20 Montageanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

A.O. Smith

A.O. Smith Gphe 50 Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung

PVI

PVI MAXIM Bedienungsanleitung