MSA Altair Pro Bedienungsanleitung

Scroll through menu displays.

Gas detector is ready for use.

Begin Setup Here

Activating the ALTAIR Pro Single Gas Detector

Need to change factory set points? Turn page over

Activate/Turn-on See inset below

Fresh-Air Setup Turn page over

PRESS and HOLD the TEST button

for 5 seconds until ON displays.

* ALTAIR Pro Single-Gas Detectors must be activated

within 6 months of manufacture.

111 Rev. 3 10074963

ID 0802-77-MC / Jan 2011

© MSA 2011 Printed in U.S.A.

ALTAIR® Pro Single Gas Detector Quick Start Card

Changing Alarm Set Points Before Activation

Alarm set points can be changed manually before activation.

Alarm set points can be changed by removing the battery.

After activation, use MSA Link™ Software.

•Press the test button once (do not hold the button).

• To change the low alarm set point, press and hold the test button when Lo Alarm is displayed.

• To change the high alarm set point, press and hold the test button when Hi Alarm is displayed.

After 3 seconds the ALTAIR Pro Detector will shut o.

WARNING

The quick start card provides only a brief description of the operating instructions for the

ALTAIR Pro Single-Gas Detector. The user of this instrument must be fully aware of the limitations

and instructions supplied in the operating instruction manual. Failure to follow the instructions

may lead to serious personal injury or death.

Fresh-Air Setup (FAS)

Monthly FAS is required on O2sensors; non-compliance will cause

sensors to fail.

•NOTE: test in fresh, uncontaminated air and do not breathe on the sensor.

• Enter FAS/Calibration mode by pressing the TEST button.

• When Test Gas ? displays, press and hold the TEST button to enter calibration mode.

• Press the TEST button at the FAS ? screen to perform a calibration at 20.8% O2.

The Condence Indicator ashes every 60 seconds to notify the user that the instrument

is ON and operating normally. LEDs ash briey every 60 seconds.

Activating the ALTAIR Pro Single-Gas Detector

•Press and hold the test button for 5 seconds until ON and ?display.

• Scroll through menu displays.

Helpful Information

• For access to ALTAIR Pro Single-Gas Detector online instructions:

www.msanorthamerica.com/catalog/product500778.html

• For live help in activating your ALTAIR Pro Single-Gas Detector:

1.800.MSA.2222

MSA Bump/Calibration Statement

• Perform an alarm function check and a bump test before each day’s use.

If the instrument fails either check, the instrument must be taken out of service.

Andere Handbücher für Altair Pro

3

Inhaltsverzeichnis

Andere MSA Gaswarngerät Handbücher

MSA

MSA 3600 Bedienungsanleitung

MSA

MSA ALTAIR io DOCK Bedienungsanleitung

MSA

MSA MGS-550 Bedienungsanleitung

MSA

MSA ORION Bedienungsanleitung

MSA

MSA ALTAIR io360 Bedienungsanleitung

MSA

MSA 47K Series Bedienungsanleitung

MSA

MSA ALTAIR 2X Bedienungsanleitung

MSA

MSA ALTAIR4 Technisches Handbuch

MSA

MSA General Monitors OBSERVER-i Bedienungsanleitung

MSA

MSA Altair Pro Bedienungsanleitung

MSA

MSA General Monitors OBSERVER-i Bedienungsanleitung

MSA

MSA altair 4x Bedienungsanleitung

MSA

MSA MultiGard 5000 Bedienungsanleitung

MSA

MSA S5000 Bedienungsanleitung

MSA

MSA altair 5 Bedienungsanleitung

MSA

MSA GTYQ-DF-8500 C Bedienungsanleitung

MSA

MSA 47K Series Bedienungsanleitung

MSA

MSA Ultima OPIR-5 Benutzerhandbuch

MSA

MSA PrimaX Bedienungsanleitung

MSA

MSA Sirius Bedienungsanleitung

MSA

MSA Ultima X Bedienungsanleitung

MSA

MSA Altair Pro Bedienungsanleitung

MSA

MSA BACHARACH MGS-401 Bedienungsanleitung

MSA

MSA TG5000 Bedienungsanleitung

Beliebte Gaswarngerät Handbücher anderer Marken

Macurco

Macurco GD-6 Bedienungsanleitung

Evikon

Evikon E2632 Bedienungsanleitung

Critical Environment Technologies

Critical Environment Technologies CGAS-A Series Bedienungsanleitung

DOD Technologies

DOD Technologies ChemLogic CL96 Bedienungsanleitung

DEGA

DEGA NS III LCD Series Bedienungsanleitung

RKI Instruments

RKI Instruments 35-3001A-08-01 Bedienungsanleitung

PEMTECH

PEMTECH PT2008 Series Bedienungsanleitung

Coster

Coster RGS 328 Bedienungsanleitung

Sygonix

Sygonix 2483186 Bedienungsanleitung

Perry

Perry 1GA 50917MET/P Bedienungsanleitung

isweek

isweek AS8900 Bedienungsanleitung

Oldham

Oldham OLC 10 Bedienungsanleitung

Wizmart

Wizmart NB983 Bedienungsanleitung

Beacon

Beacon MEGA Handbuch

RKI

RKI GX-6000 Bedienungsanleitung

Dräger

Dräger PIR 7000 Bedienungsanleitung

GDS

GDS GASMAX EC Bedienungsanleitung

Seitron

Seitron BE COOL R1 Bedienungsanleitung