MSA MultiGard 5000 Bedienungsanleitung

3103-1001 Rev. 0

MULTIGARD®5000 GAS SAMPLING SYSTEM

DOCUMENTATION PACKAGE

Description

Section

Ultima X Series Gas Monitor, Product Information CD, P/N 10042446

MULTIGARD 5000 SYSTEM CONFIGURATION DATA

MultiGard System Configuration

User Configured Outputs Planning Matrix

MULTIGARD 5000 SYSTEM OPERATION AND MAINTENANCE

MANUAL

Custom Functions and Feature Descriptions

3103-1001 Rev. 0

SENSOR / ANALYZER MANUALS

Ultima® X Gas Series Gas Monitor, P/N 10036101

Ultima/Ultima X Series Controller and Calibrator, P/N 813379

ChemGard Manual P/N 10031540

MULTIGARD 5000 SYSTEM SUPPORT DOCUMENTS

Safe Handling of Compressed Gasses in the Laboratory and Plant

Matheson BR-11

Replacement Parts Form

Section 1

MULTIGARD®5000 SYSTEM

CONFIGURATION DATA

Instrument Division 1-800-MSA-INST or FAX (724) 776-8783

MSA International (412) 967-3354 or FAX (412) 967-3451

In Canada 1-800-267-0672 or FAX (416) 663-5908

Manufactured by

MSA North America

1000 Craberry Woods Drive Cranberry Township, PA 16066

MSA CORPORATE CENTER

1000 Cranberry Woods Drive

Cranberry Township, Pennsylvania 16066

MultiGard®5000

System Configuration Data

Contents

1. Custom System Definition

2. Factory Configured Parameters

3. User Configured Parameters

4. User Configured Outputs Planning Matrix - Option # 1

5. User Configured Outputs Planning Matrix - Option # 2

MultiGard Custom System Definition

System Serial Number:

H17-400913267-11-001 & H17-400913267-11-002

End User:

Thermal Equipment Corp

Job Number:

400913267

ATO:

A-MG5000-C-B-A-B-0-0-A-A-A-B-C

Model:

Single 32

Processor Version:

3102-20 Rev 0

Display Version:

3102-21 Rev 0

System A

System B

Calibration Gases

Zero

Instrument Air

Comb

Propane .6% Span Value 20

CO 60 PPM

Nominal Sensor Flow Rate

3 SCFH +/- .5 SCFH

Minimum Sensor Flow Rate

2 SCFH +/- .5 SCFH

Minimum Sample Line Flow Rate

8 SCFH +/- .5 SCFH

UCO Option # 1

Not Installed

(User Configured Outputs)

Form C Relays

Solid State Outputs

UCO Option # 2

Not Installed

(User Configured Outputs)

Form C Relays

Solid State Outputs

System Drawings

Drawing Number

DSK3103-

1045

Notes:

System is configured for BACNet

WAN side admin IP is 192.168.1.110:8080

LAN 10.10.79.103 BACNet, Processor 10.10.79.102, Display 10.10.79.101, Router 10.10.79.1

Panelview Plus 7, V9.0

MultiGard Factory Configured Parameters

Sensor 1

Sensor 2

Sensor 3

Sensor 4

Sensor Type (5 characters max)

Comb

Engineering Units

%LEL

PPM

Low Engineering Unit

High Engineering Unit

100

Analog Signal Interface Type

Current

Analog Input Signal Maximum

Analog Input Signal Minimum

Warning Direction

Increasing

Alarm Direction

Increasing

Auto Standardize

Disabled

ASTD Tolerance in EGU's, Low

ASTD Tolerance in EGU's, High

Synthetic Span Gas in Use

Combustible Sensor?

Yes

Warning & Alarm Limit in %LEL

Purge Operation (comb. sensor)

Yes

Purge valve selection (none,

Zero

zero,span1,span2)

Purge Set Point in %LEL

Zero

Span 1

Span 2

Sample Purge

Auto Standardize Duration

Auto Standardize Duration System B

Purge Duration (sec.)

Purge Duration, System B (sec.)

Manual Control of Span 1 Valve

Yes

Manual Control of Span 2 Valve

Yes

System B Control of Span 1 Valve

System B Control of Span 2 Valve

PIR Ready Enabled

PIR Ready Enabled System B

MultiGard Default User Parameters

Password

(Open System)

Sensor 1

Sensor 2

Sensor 3

Sensor 4

Trouble Set Points

-5

(all points)

Warning Set Points

(all points)

Alarm Set Points

(all points)

Extended Analysis

100

(time rate trigger, inc. & dec.)

Extended Analysis

100

(increasing level trigger)

Extended Analysis

-100

(decreasing level trigger)

Hysteresis

(in sensor EGU units)

Analysis Time (sec.)

Extended Analysis Time (sec.)

(based on slowest sensor)

Analysis Time System B

Extended Analysis Time Sys. B

(based on slowest sensor)

Trouble Relay

Warning Relay

Alarm Relay

Horn Relay

Latched/Non-latched

Latched

Non-Latched

Fail Safe/Non-Fail Safe

Fail-Safe

Non-Fail Safe

On Delay (sec.)

Off Delay (sec.)

System B Latched/Non-latched

System B Fail Safe/Non-Fail Safe

System B On Delay (sec.)

System B Off Delay (sec.)

Days

Hours

Minutes

Timed Auto Standardize # 1

Timed Auto Standardize # 2

Timed Auto Standardize # 3

3103-1001 Rev. 0 1

Section 2

MULTIGARD®5000 SYSTEM

OPERATION AND MAINTENANCE MANUAL

THIS MANUAL MUST BE CAREFULLY READ BY ALL

INDIVIDUALS WHO HAVE OR WILL HAVE THE

RESPONSIBILITY FOR USING OR SERVICING THE

PRODUCT. Like any piece of complex equipment, this instrument

will perform as designed only if it is used and serviced in

accordance with the manufacturer’s instructions. OTHERWISE

IT COULD FAIL TO PERFORM AS DESIGNED AND PERSONS

WHO RELY ON THIS PRODUCT FOR THEIR SAFETY

COULD SUSTAIN SEVERE PERSONAL INJURY OR DEATH.

The warranties made by Mine Safety Appliances Company with respect

to this product are voided if the product is not installed, used and

serviced in accordance with the instructions in this manual. Please

protect yourself and others by following them. We encourage our

customers to write or call regarding this equipment prior to use or for

any additional information relative to use or repairs.

WARNING

3103-1001 Rev. 0 2

MultiGard®5000 System Instruction Manual Outline

1. General Information

1.1 Introduction

1.2 General Operating Specifications

1.3 Terminology

2. Installation

2.1 Receiving

2.2 Unpacking

2.3 Instrument Location Guidelines

2.4 Wiring

2.5 Plumbing

2.5.1 Sample Line Leak Checking

3. System Start-up / Set-up

3.1 Power-Up Sequence

3.2 Sensor/Analyzer Flow Adjustment, Flow Switch Adjustment

3.3 Sample Transport Time

3.4 Dwell Time Parameters

3.5 Actual Dwell Time

3.6 Auto Standardize Mode

4. Operator Interface

4.1 Operational Screens- Open Access

4.1.1 Overview

4.1.2 Gas Levels (and Alarming Status)

4.1.3 Flow Status (Sample and Bypass)

4.1.4 Auto Standardization

4.1.5 Manual Calibration

4.1.6 Sequencer Control (and Point Bypass Status)

4.1.7 Actual Point Pattern

4.1.8 About MultiGard 5000 System and Security Check

4.2 System Set-up Screens- Secure Access

4.2.1 Numerical Data Entry Screen

4.2.2 System Set-up Menu

4.2.3 Set points

4.2.4 User Configured Outputs (UCO) Option

4.2.5 UCO Enables

4.2.6 Extended Set-Up and Sample Transport Times

4.2.7 Sequencer Point Bypass

4.2.8 Sequencer Point Order

4.2.9 Diagnostics

4.2.10 SD Card Access, Password Change and Clock Set

Andere Handbücher für MultiGard 5000

Andere MSA Gaswarngerät Handbücher

MSA

MSA 47K Series Bedienungsanleitung

MSA

MSA GTYQ-DF-8500 PR Bedienungsanleitung

MSA

MSA BACHARACH MGS-401 Bedienungsanleitung

MSA

MSA S5000 Bedienungsanleitung

MSA

MSA General Monitors OBSERVER-i Bedienungsanleitung

MSA

MSA ALTAIR io 4 Bedienungsanleitung

MSA

MSA Sirius Bedienungsanleitung

MSA

MSA Altair Pro Bedienungsanleitung

MSA

MSA Altair Pro Bedienungsanleitung

MSA

MSA ALTAIR 2X Bedienungsanleitung

MSA

MSA ALTAIRE 4X Bedienungsanleitung

MSA

MSA Ultima OPIR-5 Benutzerhandbuch

MSA

MSA Altair Pro Bedienungsanleitung

MSA

MSA ALTAIR io 4 Bedienungsanleitung

MSA

MSA altair 5 Bedienungsanleitung

MSA

MSA ALTAIR5 Technisches Handbuch

MSA

MSA 47K Series Bedienungsanleitung

MSA

MSA ULTIMA X5000 Bedienungsanleitung

MSA

MSA ALTAIR io360 Bedienungsanleitung

MSA

MSA Ultima Series Bedienungsanleitung

MSA

MSA GTYQ-DF-8500 C Bedienungsanleitung

MSA

MSA SMC 5100-IT Series Bedienungsanleitung

MSA

MSA DF-8500 Bedienungsanleitung

MSA

MSA Altair Pro Bedienungsanleitung

Beliebte Gaswarngerät Handbücher anderer Marken

Macurco

Macurco GD-6 Bedienungsanleitung

Evikon

Evikon E2632 Bedienungsanleitung

Critical Environment Technologies

Critical Environment Technologies CGAS-A Series Bedienungsanleitung

DOD Technologies

DOD Technologies ChemLogic CL96 Bedienungsanleitung

DEGA

DEGA NS III LCD Series Bedienungsanleitung

RKI Instruments

RKI Instruments 35-3001A-08-01 Bedienungsanleitung

PEMTECH

PEMTECH PT2008 Series Bedienungsanleitung

Coster

Coster RGS 328 Bedienungsanleitung

Sygonix

Sygonix 2483186 Bedienungsanleitung

Perry

Perry 1GA 50917MET/P Bedienungsanleitung

isweek

isweek AS8900 Bedienungsanleitung

Oldham

Oldham OLC 10 Bedienungsanleitung

Wizmart

Wizmart NB983 Bedienungsanleitung

Beacon

Beacon MEGA Handbuch

RKI

RKI GX-6000 Bedienungsanleitung

Dräger

Dräger PIR 7000 Bedienungsanleitung

GDS

GDS GASMAX EC Bedienungsanleitung

Seitron

Seitron BE COOL R1 Bedienungsanleitung