MSI K7N415 Pro Bedienungsanleitung
i
Version 1.3
G52-MA00554
4MBO
ii
Manual Rev: 1.3
Release Date: Feb. 2002
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU
RESEAU.
Micro-Star International MS-6373N
Tested to comply
with FCC Standard
For Home or Office Use
iii
Edition
Feb. 2002
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document,
but no guarantee is given as to the correctness of its contents. Our products
are under continual improvement and we reserve the right to make changes
without notice.
Trademarks
All trademarks are the properties of their respective owners.
Intel®and Pentium®are registered trademarks of Intel Corporation.
PS/2 and OS®/2 are registered trademarks of International Business Machines
Corporation.
Windows®95/98/2000/NT/XP are registered trademarks of Microsoft
Corporation.
Netware®is a registered trademark of Novell, Inc.
Award®is a registered trademark of Phoenix Technologies Ltd.
AMI®is a registered trademark of American Megatrends Inc.
Revision History
Revision Revision History Date
V1.3 Release for 4MBO Feb. 2002
iv
1. Read the safety instructions carefully.
2. Save this User’s Guide for possible use later.
3. Keep this equipment away from humidity.
4. Lay this equipment on a stable and flat surface before setting it up.
5. The openings on the enclosure are used for air convection and to prevent
the equipment from overheating. Note: Do not cover the openings.
6. Make sure that the power voltage is within its safety range and has been
adjusted properly to the value of 110/220V before connecting the equip-
ment to the power inlet.
7. Place the power cord in a way that people are unlikely to step on it. Do not
place anything on the power cord.
8. Always unplug the power cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening that could damage the equipment
or cause an electrical shock.
11. If any of the following situations arises, get the equipment checked by a
service personnel:
zthe power cord or plug is damaged
zliquid has penetrated into the equipment
zthe equipment has been exposed to moisture
zthe equipment has not work well or you can not get it work according
to User’s Guide
zthe equipment was dropped and damaged
zthe equipment has obvious signs of breakage
12. Do not leave the equipment in an unconditioned environment with a stor-
age temperature of 600 C (1400F) or above, which may damage the
equipment.
Safety Instructions
CAUTION: To prevent explosion caused by improper battery
replacement, use the same or equivalent type of battery recommended
by the manufacturer only.
v
CONTENTS
Chapter 1 Getting Started ......................................................................... 1-1
Mainboard Specification ...................................................................... 1-2
Mainboard Layout ............................................................................... 1-4
Quick Components Guide .................................................................... 1-5
Chapter 2 Hardware Setup ........................................................................ 2-1
Central Processing Unit: CPU .............................................................. 2-2
CPU Installation Procedure ........................................................... 2-2
CPU Core Speed Derivation Procedure ......................................... 2-3
Memory ................................................................................................ 2-4
Introduction to DDR ..................................................................... 2-4
DDR Module Combination ............................................................ 2-5
DDR Module Installation Procedure ............................................. 2-5
Power Supply ....................................................................................... 2-6
ATX 20-Pin Power Connector ....................................................... 2-6
Back Panel ............................................................................................ 2-7
Back Panel Shield Installation ....................................................... 2-7
Mouse Connector ......................................................................... 2-8
Keyboard Connector ..................................................................... 2-8
Serial Port Connectors: COM A & COM 2 .................................... 2-9
LAN Jack (optional) .................................................................... 2-10
USB Connectors .......................................................................... 2-10
Game Port & Audio Ports ............................................................ 2-11
Parallel Port: LPT1 ....................................................................... 2-12
Connectors ......................................................................................... 2-13
Floppy Disk Drive Connector: FDD1 ........................................... 2-13
USB Front Connector: USB3 & USB4 ......................................... 2-13
vi
Hard Disk Connectors: IDE1 & IDE2 ........................................... 2-14
CD1/AUX1/MODEM1/JSP1 ........................................................ 2-15
CPUFAN1/PSFAN1/SYSFAN1 .................................................... 2-16
IrDA Infrared Module Header: IR1 .............................................. 2-17
Case/Speaker Connectors:JFP2/MSIFP ....................................... 2-18
Front Panel Audio Connector: JAUDIO2 .................................... 2-19
Jumpers .............................................................................................. 2-20
Clear CMOS Jumper: JBAT1 ........................................................ 2-20
FSB Mode Jumper: SW2 ............................................................. 2-21
Audio Contorl Jumper: JA1 ......................................................... 2-21
Keyboard Wake-up Jumper: JKBV1 ............................................ 2-22
Slots ................................................................................................... 2-23
AGP Slot ...................................................................................... 2-23
PCI Slots ...................................................................................... 2-24
CNR Slot ...................................................................................... 2-24
PCI Interrupt Request Routing .................................................... 2-24
Chapter 3 BIOS Setup .............................................................................. 3-1
Entering Setup ...................................................................................... 3-2
Control Keys ................................................................................. 3-2
Getting Help ......................................................................................... 3-3
Main Menu .................................................................................... 3-3
Sub-Menu ..................................................................................... 3-3
General Help <F1> ......................................................................... 3-3
Default Settings ............................................................................. 3-3
Setup Menus ........................................................................................ 3-4
Main Menu .................................................................................... 3-4
Standard CMOS Features .............................................................. 3-6
vii
Advanced BIOS Features .............................................................. 3-9
Advanced Chipset Features ........................................................ 3-13
Integrated Peripherals ................................................................. 3-15
Power Management Setup .......................................................... 3-20
PnP/PCI Configurations .............................................................. 3-24
PC Health Status ......................................................................... 3-26
Frequency/Voltage Control .......................................................... 3-28
Load High Performance/BIOS Setup Defaults ............................. 3-29
Set Supervisor/User Password .................................................... 3-30
Appendix A: DDR DIMM Configuration ................................................... A-1
Appendix B: Installing nForce Core Drivers under Windows 98 ............ B-1
Installing GART Drivers ............................................................... B-2
Installing the Audio Drivers ......................................................... B-3
Installing Ethernet Drivers ........................................................... B-4
Installing SMBus Drivers ............................................................. B-5
Updating Memory Controller Drivers ........................................... B-6
Glossary .................................................................................................... G-1
Getting Started
1-1
Chapter 1. Getting Started 1
Getting Started
Congratulations on purchasing the MSI mainboard. K7N415 Pro
(MS-6373N) ATX mainboard is an excellent computer mainboard based on
the innovative nForce 415D chipset, which supports the latest AMD®
Athlon/Athlon XP/Duron processor series and provides you with a cost-
effective solution.
TOPICS
Mainboard Specification 1-2
Mainboard Layout 1-4
Quick Components Guide 1-5
Chapter 1
1-2
Mainboard Specification
CPU
Supports Socket A (Socket 462) for AMD Athlon/Athlon XP/Duron pro-
cessors up to 2000+MHz
Chipset
nForce 415D chipset
- Support 200/266MHz FSB
- Twinbank Memory Architecture/128-bit DDR memory controller
- AGP 4x support
- Hyper Transport interface to MCP (800MB/sec max.)
MCP-D(Media Communications Processor)
- Dual ATA/100 controller
- Support USB UHCI 1.0a, provide up to six USB ports
- IEEE 802.3 compatible MAC (MII)
- Integrated Audio Processor Unit, AC’97 2.1 compliant
- SPDIF output function
MainMemory
Support up to three DDR DIMMs
- Maximum memory size up to 1.5 GB
- Support 128-bit system memory
Slots
One AGP slot
- Support AGP 4x (1.5V only)
One CNR slot
Five PCI slots
- 32-bit Master PCI 2.2 compliant
- Support 3.3v/5v PCI bus interface
On-boardIDE
An IDE controller on the MCP chipset provides IDE HDD/CD-ROM
with PIO, Bus Master and Ultra DMA 100 operation modes
Support up to four IDE devices connection
Getting Started
1-3
Audio
APU (audio processing unit) integrated in MCP
- Support up to 256 hardware-processed voices or 64 hardware voice in 3D
- CNR card for 6 channel analog (optional)
- S/PDIF out through external bracket
Network(optional)
Chipset integrated10/100 Base-T Ethernet/Fast Ethernet
On-board Peripherals
One floppy port that supports two FDD with 360KB, 720KB, 1.44MB and
2.88MB
Two serial ports COM A+COM 2 (pin header)
One parallel port that supports SPP/EPP/ECP modes
Six USB ports (2 x rear connectors and 2 x USB front pin header to
support four ports)
One IrDA connector
One RJ-45 connector for Ethernet (optional)
One Audio/Game port
One D-Bracket pin header (optional)
BIOS
The mainboard BIOS provides “Plug & Play” function that can detect the
peripheral devices and expansion cards installed on the board automati
cally
Support Desktop Management Interface (DMI) function that can record
your mainboard specifications
Dimension
30.5cm x 22.5cm
Mounting
Six mounting holes
Inhaltsverzeichnis
Andere MSI Hauptplatine Handbücher
MSI
MSI 645E Max-C Bedienungsanleitung
MSI
MSI MS7318M1 Bedienungsanleitung
MSI
MSI B550-A PRO Bedienungsanleitung
MSI
MSI MAG B460 TOMAHAWK Bedienungsanleitung
MSI
MSI K9AG Neo2-Digital Bedienungsanleitung
MSI
MSI 790XT-G45 series Bedienungsanleitung
MSI
MSI P45T-C53 Series Bedienungsanleitung
MSI
MSI H81M-E34 Series Bedienungsanleitung
MSI
MSI MS-7058 Bedienungsanleitung
MSI
MSI MS-7596 (v1.x) Bedienungsanleitung
MSI
MSI MS-98H5 Bedienungsanleitung
MSI
MSI H110M PRO-VD PLUS Bedienungsanleitung
MSI
MSI Z270 GAMING M6 AC Bedienungsanleitung
MSI
MSI PRESTIGE X570 CREATION Bedienungsanleitung
MSI
MSI K8N NEO4-F - Motherboard - ATX Bedienungsanleitung
MSI
MSI H310M GAMING ARCTIC Bedienungsanleitung
MSI
MSI H55M-ED55 Series Bedienungsanleitung
MSI
MSI MPG B550I GAMING EDGE WIFI Bedienungsanleitung
MSI
MSI X299 XPOWER GAMING AC Bedienungsanleitung
MSI
MSI 870S-C45 Series Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
