MSI MS-6532 Bedienungsanleitung
i
Version1.0
G52-MA00409
MS-6532 (v1.X) Micro ATX Mainboard
MSI
MICRO-STAR INTERNATIONAL
ii
Manual Rev: 1.0
Release Date: July 2001
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU
RESEAU.
Micro-Star International MS-6532
Tested to comply
with FCC Standard
For Home or Office Use
iii
Edition
July 2001
Copyright Notice
The material in this document is the intellectual property of MICRO-
STAR INTERNATIONAL. We take every care in the preparation
of this document, but no guarantee is given as to the correctness of its
contents. Our products are under continual improvement and we re-
serve the right to make changes without notice.
Trademarks
All trademarks used in this manual are the property of their respective
owners.
Intel and Pentium are registered trademarks of Intel Corporation.
PS/2 and OS/2 are registered trademarks of IBM Corporation.
Windows 95/98/2000 and Windows NT are registered trademarks of Microsoft.
Netware is a registered trademark of Novell.
Award is a registered trademark of Award Software Inc.
Revision History
Revision Revision History Date
V1.0 First release July 2001
iv
1. Always read the safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
7. Place the power cord such a way that people can not step on it. Do not
place anything over the power cord.
8. Always Unplug the Power Cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening that could damage or cause electri-
cal shock.
11. If any of the following situations arises, get the equipment checked by a
service personnel:
zThe power cord or plug is damaged
zLiquid has penetrated into the equipment
zThe equipment has been exposed to moisture
zThe equipment has not work well or you can not get it work according
to User’s Manual.
zThe equipment has dropped and damaged
zIf the equipment has obvious sign of breakage
12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED,STORAGETEMPERATUREABOVE600
C(1400F),IT
MAY DAMAGE THE EQUIPMENT.
Safety Instructions
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
v
CONTENTS
Chapter 1. Introduction ............................................................... 1-1
Mainboard Specifications .......................................................... 1-2
Mainboard Layout ..................................................................... 1-4
Quick Components Guide ......................................................... 1-5
Connectors & Jumpers .............................................................. 1-6
Back Panel ............................................................................... 1-8
Chapter 2. AWARD® BIOS Setup ................................................. 2-1
Entering Setup .......................................................................... 2-2
Control Keys ............................................................................. 2-2
Getting Help .............................................................................. 2-3
The Main Menu ......................................................................... 2-4
Standard CMOS Features ......................................................... 2-5
Advanced BIOS Features .......................................................... 2-6
Advanced Chipset Features ...................................................... 2-7
Integrated Peripherals ............................................................... 2-8
Power Management Setup ........................................................ 2-9
PNP/PCI Configurations .......................................................... 2-10
PC Health Status .................................................................... 2-11
Frequency/Voltage Control ...................................................... 2-12
Load Fail-Safe/Optimized Defaults .......................................... 2-13
Set Supervisor/User Password ................................................ 2-15
Save & Exit Setup ................................................................... 2-17
Exit Without Saving ................................................................. 2-18
Introduction
1-1
Chapter 1.
Introduction 1
The MS-6532 (v1.X) Micro ATX mainboard is a high-performance com-
puter mainboard based on Intel®82845 & 82801BA chipsets. It is optimized
to support Intel®Pentium®4 processor in the 478 pin package that delivers a
high performance and professional desktop platform solution.
The Intel®82845 Memory Controller Hub (MCH) provides the processor
interface, SDRAM interface, AGP interface and hub interface. It supports: a
single processor with a data transfer rate of 400MHz, SDRAM at 133MHz
operation (PC133), AGTL+ host bus with integrated termination supporting
32-bit host addressing, 1.5V AGP interface with 4x data transfer and 4x fast
write capability, and 8-bit, 66MHz 4x hub interface to the Intel ICH2.
The 82801BA I/O Controller Hub 2 (ICH2) provides the I/O subsystem
with access to the rest of the system and additionally integrates many I/O
functions. It supports: upstream hub interface for access to the Intel MCH, 2-
channel Ultra ATA/100 bus master IDE controller, USB controller 1.1 (expanded
capabilities for 4 ports), I/O APIC, SMBus controller, FWH interface, LPC
interface, AC’97 2.1 interface, PCI 2.2 interface, integrated system management
controller, and integrated LAN controller.
This chapter includes the following topics:
Mainboard Specifications 1-2
Mainboard Layout 1-4
Quick Components Guide 1-5
Connectors & Jumpers 1-6
Back Panel 1-8
Chapter 1
1-2
Mainboard Specifications
CPU
zSupports Intel®Pentium®4 processor in the 478 pin package
zSupports 1.3GHz, 1.4GHz, 1.5GHz, 1.6GHz, 1.7GHz, 1.8GHz and up
Chipset
zIntel®845 chipset (593 FC-BGA)
- Supports a single processor with a data transfer rate of 400MHz
- Supports SDRAM at 133MHz operation (PC133)
- AGTL+ host bus with integrated termination supporting 32-bit host ad-
dressing
- 1.5V AGP interface with 4x data transfer and 4x fast write capability
- 8-bit, 66MHz 4x hub interface to the Intel ICH2
zIntel®ICH2 chipset (360 EBGA)
- Upstream hub interface for access to the Intel MCH
- 2-channel Ultra ATA/100 Bus Master IDE controller
- USB controller 1.1 (expanded capabilities for 4 ports)
- I/O APIC
- SMBus controller
- FWH interface
- LPC interface
- AC’97 2.1 interface
- PCI 2.2 interface
- Integrated LAN controller
Main Memory
zSupports two SDRAM slots.
zSupports up to 2GB memory size.
Slots
zOne AGP (Accelerated Graphics Port) 4x slot
zThree PCI 2.2 32-bit master PCI bus slots (support 3.3v/5v PCI bus interface)
zOne CNR (Communication Network Riser) slot
Note: The AGP slot does NOT support 3.3V AGP 2x card. Use of
3.3V AGP 2x card may cause damages to the mainboard.
Introduction
1-3
On-Board IDE
zAn IDE controller on the ICH2 chipset provides IDE HDD/CD-ROM with
PIO, Bus Master and Ultra DMA66/100 operation modes.
zCan connect up to four IDE devices.
On-Board Peripherals
zOn-Board Peripherals include:
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
- 2 serial ports (COM A + COM B)
- 1 parallel port supports SPP/EPP/ECP mode
- 4 USB ports (Rear * 2/ Front * 2)
- 1 LAN RJ45 jack
- 1 audio/game port
Audio
zICH2 chip integrated
zSupport 2 channel audio
BIOS
zThe mainboard BIOS provides “Plug & Play” BIOS which detects the pe-
ripheral devices and expansion cards of the board automatically.
zThe mainboard provides a Desktop Management Interface (DMI) function
which records your mainboard specifications.
Dimension
zMicro ATX Form Factor 24.3cm x 22.5cm
Mounting
z6 mounting holes
Chapter 1
1-4
PCI Slot 1
PCI Slot 2
PCI Slot 3
CNR
Intel
Brookdale
chipset
JPW1
JP3
JLAN1
IR1
J7
C_FAN1
P_FAN1
PWRSW1
BATT
+
ICH2
JWOL1
ATX
PowerSupply
USB1
F_P1
JGS1
JAUDIO1
JBAT1
JGLED1
JGL1
JMDM1
S_FAN1
FWH
IDE1
IDE2
T: mouse
B: keyboard
Top :
Game port
Bottom:
Line-Out
Line-In
Mic
Winbond
W83627HF-AW
FDD1
AGP Slot
Codec
RTL
8100L
CD_IN2
CD_IN1
MDM_IN1
DIMM2
DIMM1
Mainboard Layout
MS-6532 (v1.X) Micro ATX Mainboard
Introduction
1-5
Quick Components Guide
Component Function
JWR1 ATX 20-pin power connector
JPW1 ATX 12V power connector
JKBMS1 Mouse connector
JKBMS1 Keyboard connector
USB Connectors Connecting to USB devices
COM A & COM B Serial port connector
LPT1 Parallel port connector
FDD1 Floppy disk drive connector
IDE1~ IDE2 Hard disk connectors
CD_IN1/2 CD-in connector
MDM_IN1 Modem-in connector
JGL1 Power saving LED connector
JGLED1 Power saving LED connector
JGS1 Power saving switch connector
JMDM1 Wake on ring connector
JWOL1 Wake on LAN connector
CPU/PS/SYS FAN Fan power connectors
USB1 USB front pin header
PWRSW1 Independent power switch socket
JLAN1 LAN enable/disable jumper
JBAT1 Clear CMOS jumper
J7 BIOS flash jumper
JP3 Onboard audio codec jumper
JAUDIO1 Front panel audio connector
F_P1 Case connector AGP
IR1 Infrared Module Connector
AGP Slot Connecting to AGP cards
PCI Slots Connecting to expansion cards
CNR Slot Connecting to expansion cards
Inhaltsverzeichnis
Andere MSI Hauptplatine Handbücher
MSI
MSI PRESTIGE X570 CREATION Bedienungsanleitung
MSI
MSI X99A GODLIKE GAMING CARBON Bedienungsanleitung
MSI
MSI H6M-P30 (B3) Bedienungsanleitung
MSI
MSI B650 CARBON WIFI Bedienungsanleitung
MSI
MSI MS-9A78H1 Bedienungsanleitung
MSI
MSI Z87M-G43 Series Bedienungsanleitung
MSI
MSI 990FXA Bedienungsanleitung
MSI
MSI MS-98E3 Bedienungsanleitung
MSI
MSI 845E Neo-V Bedienungsanleitung
MSI
MSI MEG X570S UNIFY-X MAX Bedienungsanleitung
MSI
MSI 945GM2 - Fuzzy Motherboard - Mini ITX Bedienungsanleitung
MSI
MSI G31M4 Series Bedienungsanleitung
MSI
MSI MAG X670E TOMAHAWK WIFI Bedienungsanleitung
MSI
MSI PRO Z790-A MAX WIFI Bedienungsanleitung
MSI
MSI MS-6507 Kurzanleitung
MSI
MSI MS-7260 Bedienungsanleitung
MSI
MSI 945GCM478 Series Bedienungsanleitung
MSI
MSI Z87-GD65 GAMING Bedienungsanleitung
MSI
MSI PRO H410M-B Bedienungsanleitung
MSI
MSI A75MA-P35 series Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
