Multicomp pro MP780522 Bedienungsanleitung

Digital Tachometer

MP780522

Please read these instructions carefully before use and retain for future reference.

• To avoid injuries to animal or human eyes, Please do not point the laser beam in eyes

or look directly into beam.

• There are no user-serviceable parts in this product. Refer servicing to qualied

personnel.

• Never operate the meter with the cover removed or the battery door open.

• Remove dead batteries from the meter or if it is not going to be used for a long time.

• Never mix old and new batteries together, or different types of batteries.

• Never dispose of batteries in a re, or attempt to recharge ordinary batteries.

SAFETY INFORMATION

FEATURES

WHATS INCLUDED

• This Digital Tachometer provides fast and accurate non-contact RPM and surface

speed measurements of rotating objects.

• *This tachometer is used the CPU technique, photo-electrical technique, and junction

laser technique for one instrument combined PHOTO TACH. (RPM & REV)

• Two test modes: rotate speed mode (unit: RPM) & count mode (unit: REV)

• Wide measure range and high resolution.

• High visible digital LCD and backlight display.

• Built-in memory recalls Max/Min and last value stored.

• Tachometer

• Instructions

• Carrying case

• 3 x Reective tapes

Memory Button

Measure Button

Mode Button

LCD Display

Laser Lens

OPERATION

MAINTENANCE

• Cut the reective adhesive tap provide into approx 12mm (0.5″) squares and apply one

square to each rotation shaft.

NOTE: The non-reective area must always be greater than the reective area.

• If the shaft is normally reective, it must be covered with black tape or black paint

before attaching reective tape

• The shaft surface must be clean and smooth before applying reective tape.

• Depress the “MEAS” button and align the visible light beam with the applied target

• Verify that monitor indicator lights when the target aligns with the beam.

• The current mode is the last time mode used. If you need to change the mode, release

the “MEAS” button and press the “MODE” button before the instrument auto powers off

to switch between “RPM” and “REV” (revolution).

• Select the mode of you require, then press the “MEAS” to start readings.

NOTE: This instrument will auto power off in 10 sec after releasing the “MEAS” button.

• Press the “MEM” button displays the reading of the Max, Min and Last value for the

previous measurement taken.

VERY LOW RPM MEASUREMENT

• Measuring high resolution and fast sampling time is easier than measuring slow RPM.

• If measuring very low RPM values, it is suggested to attach more “REFLECTIVE

MARKS” spaced around the shaft

• Then divide the reading shown by the number of “REFLECTIVE MARKS” placed to get

the correct RPM value.

Replacing the battery

• When the meter display fades the battery needs changing.

• Open the battery cover on the rear case.

• Remove the old battery and t a new 9V PPA battery into the battery holder noting the

correct polarity of the connector.

• Replace the battery cover.

Cleaning

• Clean the meter with a clean, soft cloth.

• Do not use any chemicals, abrasives or solvents that could damage the meter.

SPECIFICATIONS

Display: Large 5 digit LCD

Non-contact test range: 2 to 99,999 RPM

Tot test range: 0 to 99,999 RPM

Accuracy: ±(0.05% + 1digit)

Resolution: 0.1RPM (2 to 9999.9RPM) / 1RPM (over 10000 RPM)

Sampling time: 0.5 sec.(over 120 RPM)

Detecting distance: 50mm to 500mm

Memory: Built-in memory recalls Max/Min/Last

Time base: Quartz crystal

Power consumption: Approx.45mA

Battery: 9V battery or 6VDC via PSU

Dimensions: 160 x 60 x 42mm

Weight: 150g approx

Operation temp: 0o to 50o (32o to 122o)

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF

ELECTRICAL & ELECTRONIC EQUIPMENT

These symbols indicate that separate collection of Waste Electrical and Electronic Equipment

(WEEE) or waste batteries is required. Do not dispose of these items with general household

waste. Separate for the treatment, recovery and recycling of the materials used. Waste batteries

can be returned to any waste battery recycling point which are provided by most battery retailers.

Contact your local authority for details of the battery and WEEE recycling schemes available in

your area. Made in China. LS12 2QQ

Man Rev 1.0

Inhaltsverzeichnis

Andere multicomp pro Messgerät Handbücher

multicomp pro

multicomp pro MP60607 Bedienungsanleitung

multicomp pro

multicomp pro MP700506 Bedienungsanleitung

multicomp pro

multicomp pro MP760861 Bedienungsanleitung

multicomp pro

multicomp pro MP780647 Bedienungsanleitung

multicomp pro

multicomp pro MP780904 Bedienungsanleitung

multicomp pro

multicomp pro MP780966 Bedienungsanleitung

multicomp pro

multicomp pro MP700121 Bedienungsanleitung

multicomp pro

multicomp pro MP780859 Bedienungsanleitung

multicomp pro

multicomp pro MP001186 Bedienungsanleitung

multicomp pro

multicomp pro MP760862 Bedienungsanleitung

multicomp pro

multicomp pro MP700022 Bedienungsanleitung

multicomp pro

multicomp pro MP780896 Bedienungsanleitung

multicomp pro

multicomp pro MP780994 Bedienungsanleitung

multicomp pro

multicomp pro MP780892 Bedienungsanleitung

multicomp pro

multicomp pro MP005768 Bedienungsanleitung

multicomp pro

multicomp pro MP780118 Bedienungsanleitung

multicomp pro

multicomp pro MP780649 Bedienungsanleitung

multicomp pro

multicomp pro MP770291 Bedienungsanleitung

multicomp pro

multicomp pro MP760607 Bedienungsanleitung

multicomp pro

multicomp pro MP700006 Bedienungsanleitung

multicomp pro

multicomp pro MP780119 Bedienungsanleitung

multicomp pro

multicomp pro MP780002 Bedienungsanleitung

multicomp pro

multicomp pro MP780117 Bedienungsanleitung

multicomp pro

multicomp pro MP700852 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung

multicomp pro MP780522 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken