Multitech IWAY MT128ISA-UV Bedienungsanleitung

Models MT128ISA-UV,

MT128PCI-SD and MT128PCI-SV

Quick Start Guide

82072611.p65 1/6/04, 11:36 AM1

ModelsMT128ISA-UV,MT128PCI-SD,MT128PCI-SV

PN: 82072611

part, without prior written permission from Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with re-

spect to the contents hereof and specifically disclaims any implied warranties

of merchantability or fitness for any particular purpose. Furthermore, Multi-

Tech Systems, Inc. reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation of Multi-

Tech Systems, Inc. to notify any person or organization of such revisions or

changes.

Revision Date Description

C 11/15/2003 Manual updated to include Plug & Play driver

installation.

Trademarks

MultiModem, MultiModemISDN, Multi-Tech, and the Multi-Tech logo are

trademarks of Multi-Tech Systems, Inc. All other trademarks are owned by

their respective companies.

Technical Support

France [email protected] +33 1-64 61 09 81

India [email protected] +91 124 6340778

U.K. [email protected] +44 118 959 7774

U.S and Canada [email protected] (800) 972-2439

Rest of World [email protected] +763 717-5863

World Headquarters

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112 U.S.A.

(763) 785-3500 or (800) 328-9717

U.S. FAX (763) 785-9874

Technical Support (800) 972-2439

www.multitech.com

82072611.p65 1/6/04, 11:36 AM2

Quick Start Guide

Getting Started

This step-by-step guide explains how to set up the Multi-Tech

MT128ISA-UV, MT128PCI-SD, and MT128PCI-SV modems.

Safety Warnings

•Never install telephone wiring during a lightning storm.There may be

a remote risk of electrical shock from lightning.

•Never install telephone jacks in wet locations unless the jack is

specifically designed for wet locations.

•Only use with UL and cUL listed computers.

•Never touch uninsulated telephone wires or terminals unless the

telephone line has been disconnected at the network interface.

•Use caution when installing or modifying telephone lines.

•Do not use the telephone to report a gas leak in the vicinity of the

leak.

•To reduce the risk of fire, use only No. 26 AWG or higher gauge

telecommunication line cord.

•Ports that connect to other apparatus are defined as SELV. To

ensure conformity with EN 41003, ensure that these ports connect

only to the same type of port on the other apparatus.

Unpacking the MultiModemISDN Adapter

Before installing the terminal adapter, verify the package includes:

•One internal ISDN PC adapter.

•MT128-series System CD containing modem driver and User Guide

•RJ-45 cable (6 ft.) for ISDN connection

•RJ-11 cable for POTS connection (V models only)

•This Quick Start Guide

•RJ11-BTS adapter (UK only)

If any items are missing, contact Multi-Tech or your dealer/distributor.

82072611.p65 1/6/04, 11:36 AM3

Quick Start Guide

Hardware Installation

Note: Disregard step 1 for model MT128ISA-UV only.

1. Model MT128PCI-SD/SV and MT128ISA-UV adapters provide two

jumpers (JP1 and JP2) for the terminator setup. The default setting

is terminator enabled. Remove the JP1 and JP2 shorting plugs if

other ISDN devices (with adapters) are connected to the NT1.

Figure 1. Internal ISDN ISA Adapter

Figure 2. Internal ISDN PCI Adapters

2a. Turn off the computer power and remove the PC cover.

2b. For ISA cards, select an empty ISA slot for the adapter. For PCI

adapters, select an empty PCI slot for the card. Remove the

expansion slot cover and save the retaining screw.

2c. Before handling the adapter, discharge any static on your body by

touching a piece of grounded metal, such as the computer chassis.

82072611.p65 1/6/04, 11:36 AM4

2d. Carefully remove the ISDN adapter from the antistatic bag, handling

it only by the mounting bracket and edges. Do not touch the gold-

plated connectors along the bottom edge.

2e. Place the adapter directly over the appropriate open slot. Gently

push the connector into place until the adapter is firmly seated and

the retaining bracket is flush with the computer chassis. Fasten the

bracket to the computer chassis with the screw removed in Step 2b.

2f. Replace the PC cover.

3. Models MT128ISA-UV and MT128PCI-SV provide a POTS interface

with RJ-11 jack to connect to analog devices (analog telephone, G3

fax, modem, or answering machine). Use an RJ-11 connector cable

between the device and the RJ-11 phone jack.

Figure 3. Modular Analog and BRI Connections

4a. Make the ISDN connection. Connect the MT128PCI-SD/SV adapter

and NT1 with the RJ-45 cable connector, and insert the ISDN BRI

line into the correct NT1 socket.

4b. Insert the ISDN BRI line with the RJ-45 connector cable directly into

the RJ-45 jack on the MT128ISA-UV adapter.

The ISDN PC environment is ready for driver installation.

82072611.p65 1/6/04, 11:36 AM5

Install the Modem Driver

For Windows 98/Me/2000/XP operating systems, install the modem

driver using the Windows Plug and Play feature. Follow the procedure

below to install the modem driver.

1. Verify the modem is properly connected, the turn on the computer.

Windows will detect the new modem and open the

Install New

Modem wizard.

2. Insert the MT128-series system CD. Click OK at the prompt.

3. Windows will install and configure the modem.

4. Click Finish at the prompt to exit.

Note: See the User Guide for installing the modem driver on other

operating systems.

Windows NT Installation and Configuration

The internal ISDN PC adapter under Windows NT can be used with the

standard CAPI interface or NDISWAN.

Note: To install, configure and remove devices under NT, your logon

permissions must include the ability to load and remove device drivers.

After installing the ISDN card, power up the computer. Once Windows NT

boots, use the following procedure to install the ISDN driver.

1. Click Start>Settings>Control Panel>Network>Adapter> Add

2. Click Have Disk and specify the correct drive and directory for the

NT ISDN Installation disk/CD.

3. On the Select OEM Option Screen, select ISDN MT128 ISA Adapter

and click OK (The ISA adapter does not work under Windows NT).

4. The ISDN Driver Bus Location dialog box appears. Select the proper

bus type for the new adapter. For ISA adapters, select ISA. For PCI

adapters, select PCI. Set the Bus Number to 0. Click OK.

5. Windows NT copies the ISDN driver into your system and displays

the ISDN PC Adapter Configuration screen.

6. For complete Configuration procedure, see the User Guide

Note: If the Adapter Configuration screen does not appear, or to edit the

ISDN Switch configuration, access the screen by selecting Start>

Settings> Control Panel> Network. Right click then select Properties.

10. Click OK to install and setup RAS.

82072611.p65 1/6/04, 11:36 AM6

82072611.p65 1/6/04, 11:36 AM7

82072611

This device is covered by one or more of the following patents: 5,559,793; 5,546,448;

5,546,395; 5,535,204; 5,500,859; 5,471,470; 5,463,616; 5,453,986; 5,452,289; 5,450,425;

5,355,365; 5,309,562; 5,301,274. Other patents pending.

82072611.p65 1/6/04, 11:36 AM8

Andere Handbücher für IWAY MT128ISA-UV

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Multitech Modem Handbücher

Multitech

Multitech QuickCarrier USB-D MTD-H5 Bedienungsanleitung

Multitech

Multitech MultiModem MT3334ZDX Bedienungsanleitung

Multitech

Multitech MT9234ZBAUSBCDC Bedienungsanleitung

Multitech

Multitech MultiConnect microCell MTCM2-L4G1 Bedienungsanleitung

Multitech

Multitech CC1600-11L Bedienungsanleitung

Multitech

Multitech MultiModem iCell Bedienungsanleitung

Multitech

Multitech MultiModem iCell MTCMR-E1 Bedienungsanleitung

Multitech

Multitech CommPlete MT3334HD8 Bedienungsanleitung

Multitech

Multitech MultiModem Cell MTCBA-E1-U Bedienungsanleitung

Multitech

Multitech Dragonfly MTQ-L4G1 Bedienungsanleitung

Multitech

Multitech MultiConnect Cell 100 Series MTC-EV3 Bedienungsanleitung

Multitech

Multitech MT9234ZBA-USB-CDC-XR Bedienungsanleitung

Multitech

Multitech MultiModem MTCBA-C-N1 Bedienungsanleitung

Multitech

Multitech MultiConnect Series 100 Bedienungsanleitung

Multitech

Multitech MTC-LEU4 Bedienungsanleitung

Multitech

Multitech MTCBA-E-U Bedienungsanleitung

Multitech

Multitech MT5634ZPX-PCI Bedienungsanleitung

Multitech

Multitech MultiModem Cell MTCBA-E1 Bedienungsanleitung

Multitech

Multitech MT5600BA Bedienungsanleitung

Multitech

Multitech MTCBA-E Bedienungsanleitung

Multitech

Multitech MultiModem DID Bedienungsanleitung

Multitech

Multitech MT5656ZDX Series Bedienungsanleitung

Multitech

Multitech MultiModem DSVD MT5600DSVD Bedienungsanleitung

Multitech

Multitech MultiModem II MT5600BA-V.90 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung