Multitech MultiConnect Cell 100 series Bedienungsanleitung

MultiConnect®Cell 100 Series Cellular Modem

Cat M1

MTC-MNK1 Quick Start

MultiConnect®Cell 100 Series Cellular Modem Cat M1 MultiTech Systems MultiConnect®Cell 100 Series Cellular Modem Cat M1 MultiTech Systems

Quick Start Quick Start

Installing the Cellular Modem

1. Connect the antenna to the antenna connector (CELL).

Finger-tighten.

2. For serial models, connect to the device interface:

a. Connect the DE-9 connector (9-pin) of an RS-232

cable to the RS-232 connector on the cellular modem.

b. Connect the other end to the serial port on your

computer or other device.

c. Attach the power blades to the power supply.

d. Attach the power supply to the power connector on the

cellular modem. Finger-tighten.

e. Plug the power supply into your power source.

3. For USB models, connect to the device interface:

a. Connect the mini-USB connector end of the cable to

the device's USB connector.

b. Connect the USB cable's other end to your computer,

either directly or through a hub.

After power is applied:

■The POWER LED lights after the device powers up.

■When the LS LED begins to blink, the device is registered.

Mounting Device

1. Locate the groove on the bottom of the cellular modem.

2. Slide the mounting rod through the groove.

3. To secure the rod to the desired surface, place and tighten

two screws in the holes on either end of the mounting rod.

Refer to the user guide for an illustration of the mounting

rod, as well as the dimensions for placement of the screws.

MultiConnect®Cell 100 Series Cellular Modem Cat M1

Document Part Number: 82130650L

This publication may not be reproduced, in whole or in part, without the

specific and express prior written permission signed by an executive

by Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties,

whether express, implied or by estoppels, with respect to the content,

information, material and recommendations herein and specifically

disclaims any implied warranties of merchantability, fitness for any

particular purpose and non-infringement. Multi-Tech Systems, Inc.

reserves the right to revise this publication without obligation to notify any

person or organization of such revisions or changes.

MultiConnect, MultiTech and the MultiTech logo are registered

trademarks of Multi-Tech Systems, Inc. All other brand and product

names are trademarks or registered trademarks of their respective

companies.

MultiConnect®Cell 100 Series Cellular Modem Cat M1 MultiTech Systems MultiConnect®Cell 100 Series Cellular Modem Cat M1 MultiTech Systems MultiConnect®Cell 100 Series Cellular Modem Cat M1 MultiTech Systems

Quick Start Quick Start Quick Start

Overview

The MultiConnect Cell 100 Series Cellular Modem for Cat M1 (MTC-

MNK1) provides secure data communication between many types of

devices that use legacy and the latest communication technologies.

Note: Check for an updated version of this document at

http://www.multitech.com/brands/multiconnect-cell-100-series

Package Contents

Your package typically includes the following (varies with model):

Power

Supply

1 - 9 VDC power supply and 1 - blade/plug (serial

models )

Cables 1 - Power cable from power supply (serial models) or

USB cable (USB models)

Documents 1 - Quick Start Guide, 1 - Warranty Plans, 1 -

Activation, Support & Regulatory Information

Other Items 1 - Mounting rod, 4 - Clear adhesive bumpons

Device 1- MultiConnect Cell 100 Series Cellular Modem

Note: You will need an cellular antenna, which is sold separately.

Additional Information

For more information on your device, refer to the appropriate user guide:

http://www.multitech.com/brands/multiconnect-cell-100-series

Regulatory Information

It is verified that foregoing equipment has been registered under the

Clause 3, Article 58-2 of Radio Waves Act.

Dimensions

The MTC is 4.169 inches x 3.00 inches x 1.163 inches

LED Descriptions

The top panel contains the following LEDs:

■Power and Terminal Ready LEDs - The Power LED indicates

that DC power is present. The TR LED (serial model only)

when lit indicates that unit is ready to receive data.

■Modem LEDs - Two modem LEDs indicate carrier detection

(CD LED for serial models only) and link status (LS LED).

■Programmable Signal LEDs - Three signal LEDs can be

programmed to display the signal strength level of the wireless

connection.

Side Panel Connectors

The device has connectors on both sides with the right side (top image)

the same for all models.

The right side includes:

■CELL cellular female SMA connector

■SIM card slot

■Power-saving switch (serial models only)

The left side includes:

■5-32 VDC power connector

■RS-232 (DE 9-pin, female-D) connector (serial models only)

■USB connector (USB models only)

Installing a SIM Card

To operate the modem on a particular cellular network, you need a mini

(2FF) SIM card from your network provider.

To install the SIM card:

1. Locate the SIM card slot on the side of the modem.

2. With the contacts down and notch on the left, push the SIM

card into the slot until it snaps into place.

Andere Handbücher für MultiConnect Cell 100 series

Dieses Handbuch passt für folgende Modelle

Andere Multitech Modem Handbücher

Multitech

Multitech MultiConnect MicroCell MTCM-LAT3 Bedienungsanleitung

Multitech

Multitech MultiConnect microCell MTCM2-L4G1 Bedienungsanleitung

Multitech

Multitech MultiModem MT5600ZDX Bedienungsanleitung

Multitech

Multitech MultiModem iCell Bedienungsanleitung

Multitech

Multitech MultiModem MT5600DSDV2 Bedienungsanleitung

Multitech

Multitech MTD100U Bedienungsanleitung

Multitech

Multitech MultiModem MT2834BLR Bedienungsanleitung

Multitech

Multitech SocketModem EDGE Bedienungsanleitung

Multitech

Multitech SocketModem GSM Montageanleitung

Multitech

Multitech SocketModem MT2456SMI-22 Bedienungsanleitung

Multitech

Multitech MultiModem MT2834ZPW Bedienungsanleitung

Multitech

Multitech MultiModem MT5634ZBA-V-V92 Bedienungsanleitung

Multitech

Multitech MultiModem MTCBA-G-F4 Bedienungsanleitung

Multitech

Multitech MultiModem ZBA MT9234ZBA Bedienungsanleitung

Multitech

Multitech MultiMobile V.34/33.6K Bedienungsanleitung

Multitech

Multitech CC1600-11L Bedienungsanleitung

Multitech

Multitech MultiModem V.90/K56FLEX MT5600ZDX Bedienungsanleitung

Multitech

Multitech MultiModem MTCBA-G-U-F4 Bedienungsanleitung

Multitech

Multitech MTC-C2 Bedienungsanleitung

Multitech

Multitech MultiModem DSVD MT5600DSVD Bedienungsanleitung

Multitech

Multitech MT3400ZLX Bedienungsanleitung

Multitech

Multitech MultiModem MT5600ZDX Bedienungsanleitung

Multitech

Multitech MultiModem iCell MTCMR-E1 Bedienungsanleitung

Multitech

Multitech MultiMobile MT9234MU Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung