MuxLab 500401 Bedienungsanleitung
© MuxLab Inc. 2009-2013
Specifications
Environment HDMI 1.3a
Devices DVD, plasma, projectors, monitors, TV, PC, laptops, servers
supporting HDMI. Not compatible with MuxLab p/n 500400.
Transmission Transparent to the user
Bandwidth 225MHz
Signals HDMI 1.3a protocol
Connectors HDMI receptacle.
Two (2) RJ45S for Cat5 unshielded or shielded twisted pair.
HDMI cables not included.
Max. Distance*
*Based on a maximum
length of 6.6 ft (2m) of
HDMI cable per end
480i/p: Cat5e: 300 ft (90 m) Cat6: 300 ft (90 m)
720p, 1080i: Cat5e: 200 ft (60 m) Cat6: 250 ft (76 m)
1080p 8-bit: Cat5e: 150 ft (45 m) Cat6: 200 ft (60 m)
1080p 12-bit Deep Color: not specified Cat6: 90 ft (27 m)
When installed in an electrically noisy environment, STP cable
must be used. Also, cross-connection reduces the effective
distance depending on the grade of twisted cable used. Patch
panels are not recommended with 1080p Deep Color.
RJ45 Pin Configuration
Reverse Polarity Sensitive
Use EIA/TIA 568 A or B,
straight-through wiring.
RJ45 A (Video)
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
RJ45 B (DDC)
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable Two (2) Category 5e or better twisted pair cables required.
Power Supply One (1) 110-240V/12VDC power supply with interchangeable blades
Power Consumption 3W
Temperature Operating: 0º to 55º C. Storage:-20º to 85º C. Humidity: up to 95%
non-condensing.
Enclosure ABS fire retardant plastic
Dimensions 2.4” x 2.25” x 1.0” (6.1 x 5.5 x 2.5 cm)
Weight 1.6 LB/0.7 Kg
Mounting Velcro pads included.
Compliance Regulatory: FCC, CE, RoHS
Flammability: 94V0
Warranty 2 years
Order Information 500401 HDMI Extender Kit
Tel.: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
94-000664-A SE-000664-A
HDMI Extender Kit (500401)
Quick Installation Guide
Overview
The HDMI Extender Kit (500401) allows HDMI equipment to be connected up to
200 ft (60m) @ 1080i via two (2) Cat5e unshielded twisted pair cables in a point-to-
point configuration. The product also supports 1080p Deep Color up to 90 ft (27m)
via Cat6 cable. The kit comes with one (1) Transmitter and one (1) Receiver.
Applications include; commercial and residential AV systems, classroom projector
systems, digital signage, boardroom systems, collaborative PC systems, medical
information systems.
Pre-Installation Check
Identify the connectors on the Transmitter and Receiver as indicated on the product
labels.
© MuxLab Inc. 2009-2013
Installation
Verify that the distance between the HDMI Transmitter and Receiver are within
MuxLab specifications (see Specifications table).
In order to install the Transmitter, please follow the steps below:
1. Connect the Transmitter to the HDMI video source with an HDMI compliant
cable.
2. Connect two (2) lengths of Cat5e (or higher) grade UTP cables to the Video
and DDC OUT connectors on Transmitter.
In order to install the Receiver, please follow the steps below:
3. Connect the Receiver to the HDMI display equipment with an HDMI
compliant cable.
4. Connect the two (2) Cat5e cables to the Video and DDC IN connectors of the
Receiver.
Note: Verify that the cables are connected straight-through (i.e. Video to
Video, DDC to DDC) and not inverted.
5. Connect the 12 VDC power supply first to the Receiver and then plug the power
supply into an AC power outlet. If power is present, then the green power LED will
be ON.
Note: Power the HDMI Extender Balun only after all connections are made.
6. Power on the HDMI equipment and verify the image quality.
7. The following diagram shows the final configuration.
Troubleshooting
The following tables describe some of the symptoms, probable causes and possible solutions
in respect to the installation of the HDMI Extender Kit. If you still cannot diagnose the
problem, please call MuxLab Customer Technical Support at 877-689-5228 (toll-free in North
America) or (+1) 514-905-0588 (International).
Picture/
Sound
Power
LED
Sync
LED
Probable Cause Possible Solution
No Image OFF OFF No power Check power connections
No Image ON OFF Wiring Check continuity
Check correct wiring
Verify that Video and DDC
Cat5 cables are not inverted.
No Image ON ON Synchronization Power off the source and the
display. Cycle power of the
HDMI Extender and power
on the devices.
Flickering
Image
ON ON Synchronization Check cable length
Choppy
Sound
ON ON Synchronization Check cable length
Noise in
image
ON ON Weak signal Check cable length
Verify that the HDMI cables
are certified HDMI 1.3a for
1080p Deep Color.
Green or
pink hue
ON ON DDC cable Cycle power of the HDMI
Extender. Check DDC cable
and replace.
Image
Flicker when
powering up
equipment
nearby
ON ON Interference Use STP cables.
Inhaltsverzeichnis
Andere MuxLab Extender Handbücher
MuxLab
MuxLab 500753 Bedienungsanleitung
MuxLab
MuxLab 500450-LR Bedienungsanleitung
MuxLab
MuxLab 500850 Bedienungsanleitung
MuxLab
MuxLab 500752 Bedienungsanleitung
MuxLab
MuxLab 500409 Bedienungsanleitung
MuxLab
MuxLab 500771 Bedienungsanleitung
MuxLab
MuxLab 500759-TX-HLO Bedienungsanleitung
MuxLab
MuxLab 500451-TX Bedienungsanleitung
MuxLab
MuxLab 500464-V2 Bedienungsanleitung
MuxLab
MuxLab 500456 Bedienungsanleitung
MuxLab
MuxLab 500462 Bedienungsanleitung
MuxLab
MuxLab 500409 Bedienungsanleitung
MuxLab
MuxLab 500112 Bedienungsanleitung
MuxLab
MuxLab 500451-POE Bedienungsanleitung
MuxLab
MuxLab 500465 Bedienungsanleitung
MuxLab
MuxLab 500460-RX Bedienungsanleitung
MuxLab
MuxLab 500754 Bedienungsanleitung
MuxLab
MuxLab 500754 Bedienungsanleitung
MuxLab
MuxLab ProDigital 500485 Bedienungsanleitung
MuxLab
MuxLab 500458-ARC Bedienungsanleitung
Beliebte Extender Handbücher anderer Marken
foxunhd
foxunhd SX-AEX01 Bedienungsanleitung
TERK Technologies
TERK Technologies LFIRX2 Bedienungsanleitung
Devolo
Devolo Audio Extender Handbuch
Edimax
Edimax EW-7438RPn V2 Bedienungsanleitung
Shinybow USA
Shinybow USA SB-6335T5 Bedienungsanleitung
SECO-LARM
SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung