MuxLab 500114 Bedienungsanleitung

Specifications

Environment

PoE CCTV IP

Devices

PoE CCTV IP cameras with a 10/100Mb/s Ethernet port, using up to

15.4 Watts.

Transmission

Transparent to the user

Standard supported

Ethernet side:

IEEE 802.3 10BaseT,

IEEE 802.3U 100Base-TX

IEEE 802.3af compatible PoE (on camera side only)

PoE Power

Class 3

Connectors

One (1) BNC 75 Ohms.

One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.

LED Indicators

Power, IP Traffic, 100MBps

Throughput

Unidirectional Mode: 100 Mbps downstream and 1 Mbps upstream

Bidirectional Mode: 60 Mbps downstream and upstream

Maximum Distance

RG59/RG6: Up to 3281 ft (1000m) @ 100Mbps

UTP Cat 5e/6: Up to 330 ft (100 m)

Note: When installed in an electrically noisy environment, an STP

cable must be used. Also, cross-connection reduces the effective

distance depending on the grade of twisted cable used.

RJ45 Pin

Configuration

Reverse Polarity

Sensitive. Use EIA/TIA

568A or 586B straight-

through wiring.

RJ45 Link

Pin 1 (R) Pin 2 (T)

Pin 3 (R) Pin 6 (T)

Pin 4 (R) Pin 5 (T)

Pin 7 (R) Pin 8 (T)

Cable

UTP/STP: One (1) Cat 5e/6 or better twisted pair cables required

RG59/RG6: 75 Ohms (avoid CCS cable)

Power Supply

One (1) 110-240V/24VDC 2.7A.

Power Consumption

Network Side: 1.82 Watt Camera Side: 1.73 Watt

Temperature

Operating: 0° to 40°C Storage: -20° to 85°C

Humidity: Up to 95% non-condensing

Enclosure

Metal

Accessories

Wall-mount brackets included

Dimensions

4.37” x 2.95” x 0.99” (110 x 75 x 25 mm)

Weight

2 lb (0.91 kg)

Compliance

Regulatory: FCC, CE, RoHS Flammability: 94V0

Warranty

2 years

Order Information

500114-US CCTV IP PoE Extender Kit, 1Km, US

500114-UK CCTV IP PoE Extender Kit, 1Km, UK

500114-EU CCTV IP PoE Extender Kit, 1Km, EURO

LongReach CCTV IP PoE

Extender Kit, 1Km

500114

Quick Installation Guide

Overview

The LongReach CCTV IP PoE Extender Kit, 1Km (500114) allows one IP camera (15.4

Watts) to be connected up to 3281 ft (1000m) via a single 75-ohm coax cable in a point-

to-point configuration. The maximum distance depends on the grade and quality of

coaxial cable.

Applications

CCTV IP surveillance

Installation

1. Identify the connectors on the Extenders as indicated on the product labels.

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5

Tel: (514) 905-0588 Fax: (514) 905-0589

Toll Free (North America): (877) 689-5228

E-mail: [email protected]m URL: www.muxlab.com

2. Attach the surface-mount brackets if required as shown below.

3. Verify that the distance between the CCTV IP PoE extenders is within MuxLab

specifications (see Specifications table).

4. To install the Network Side Device:

4a. Connect the extender to the PoE Ethernet Switch with a UTP Cable.

4b. Connect one (1) length of RG59 or RG6 coaxial cable to the COAX

LINK connector on the Extender.

5. To install the Camera Side Device:

5a. Connect the extender to the camera with a Cat5e/6 cable.

5b. Connect one (1) length of RG59 or RG6 coaxial cable to the COAX

LINK connector on the Extender.

6. Connect the 24VDC Power supply to the network side device first, and then plug

the power supply into an AC power outlet. If power is present, the green power

LED of the Network and Camera side device will be ON.

7. Power on the equipment and verify the image quality. The following is a diagram

of a typical configuration.

Tables

Troubleshooting

The following table describes some of the symptoms, probable causes and possible solutions

in respect to the installation of the LongReach CCTV IP PoE Extender Kit, 1Km:

Symptom

Network Side

LEDs

Camera Side

LEDs

Probable Cause

Possible

Solutions

Power

IP Traffic

Power

IP Traffic

No Image

OFF

No power

• Check the power

connection.

No Image

OFF

Coaxial Cable

• Check the coaxial

cables.

No Image

OFF

Distance

• Check the coaxial

cables length and

quality.

No Image

OFF

UTP Cable

• Check the UTP Cable

pin out.

No Image

No Traffic

• Check network

configuration.

Choppy Image

BLINK

Distance

• Check cable length

• Check the coaxial

cable quality.

If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at

877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).

Andere MuxLab Extender Handbücher

MuxLab

MuxLab 500756 Bedienungsanleitung

MuxLab

MuxLab 500409 Bedienungsanleitung

MuxLab

MuxLab 500460-RX Bedienungsanleitung

MuxLab

MuxLab 500465 Bedienungsanleitung

MuxLab

MuxLab 500451-POE Bedienungsanleitung

MuxLab

MuxLab 500040 Bedienungsanleitung

MuxLab

MuxLab 500402 Bedienungsanleitung

MuxLab

MuxLab 500112 Bedienungsanleitung

MuxLab

MuxLab 500800 Bedienungsanleitung

MuxLab

MuxLab 500780 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

MuxLab

MuxLab 100504 Bedienungsanleitung

MuxLab

MuxLab 500450-LR Bedienungsanleitung

MuxLab

MuxLab 500450 Bedienungsanleitung

MuxLab

MuxLab 500752 Bedienungsanleitung

MuxLab

MuxLab 500417 Bedienungsanleitung

MuxLab

MuxLab 500850 Bedienungsanleitung

MuxLab

MuxLab 500758 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

MuxLab

MuxLab 500759-TX Bedienungsanleitung

MuxLab

MuxLab 500401 Bedienungsanleitung

MuxLab

MuxLab 500770 Bedienungsanleitung

MuxLab

MuxLab 500409 Bedienungsanleitung

MuxLab

MuxLab 500454 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung

ASUSTOR

ASUSTOR AS5004U Bedienungsanleitung