N-Com Bluetoothk it3 Bedienungsanleitung

Firmware Version: 3.1x

USER INSTRUCTIONS AND SAFETY

Congratulations on your purchase of an N-Com product.

N-Com Bluetooth Kit3 was made using the most advanced

technologies and the best materials. Long-running tests and

thorough system development have allowed the highest audio

quality to be achieved.

For additional information about Bluetooth Kit3, and to download

high-definition instructions as well as the latest Firmware version,

visit the website www.n-com.it

REFERENCE STANDARDS

The products of the N-Com line are in compliance with standards as per the table

below:

Bluetooth

Kit3

The Bluetooth system complies with the main safety requirements

and other applicable provisions of Directive 99/5/CE, Directive

2002/95/CE, Directive 2011/65/CE, Directive 2002/96/CE

Battery

charger

Directive 2006/95, 2004/108, 2002/95/CE, 2002/96/CE,

2009/125/CE

Battery Directive 2006/66

The Declarations of Compliance can be downloaded from the website www.n-com.it

(Download section).

FccID: Y6MNCOM3 N21550

Bluetooth is a registered trademark property of Bluetooth SIG, Inc.

Contents

1. WARNINGS AND SAFETY ____ 4

1.1.Road safety _________________ 4

1.2.Switching on the system in safe

environments ____________________ 5

1.3.Interferences ________________ 5

1.4.Appropriate use ______________ 5

1.5.Qualified personnel ___________ 6

1.6.Accessories and batteries ______ 6

1.7.Disposal ____________________ 7

2. CONTENT OF THE PACKAGING 8

3. INSTALLATION ____________ 9

4. SYSTEM CHARACTERISTICS_ 10

4.1.Basic functions______________ 10

4.2.System menu ______________ 11

4.3.N-Com Wizard ______________ 12

5. PAIRING UP BLUETOOTH

DEVICES _______________ 12

5.1.Affiliation reset function ______ 14

6. MOBILE PHONE FUNCTIONS 14

7. GPS SATELLITE NAVIGATOR

FUNCTIONS _____________ 15

8. STEREO FM RADIO ________ 16

9. BLUETOOTH A2DP MUSIC

PLAYER ________________ 17

10. AUDIO DEVICES WITH CABLE

CONNECTION____________ 18

11. RIDER-PASSENGER

INTERCOM MODE _________ 18

11.1. Intercom affiliation_______18

11.2. Intercom function________19

12. BIKE-TO-BIKE INTERCOM___ 19

12.1. Bike-to-Bike pair up ______19

12.2. Making a Bike-to-Bike call _20

12.3. Taking a Bike-to-Bike call _21

13. INTERCOM VIA CABLE______ 22

14. BATTERY ________________ 23

14.1. Battery discharged signal__23

15. SUMMARY TABLE OF

CONTROLS ______________ 24

16. LIMITED WARRANTY_______ 27

16.1. Warranty coverage_______27

16.2. Exclusions and limitations

of the coverage __________________27

16.3. Validity of this limited

warranty ______________________28

16.4. Procedure for the

forwarding of claims_______________29

16.5. Product identification _____30

17. WARRANTY REGISTRATION

FORM __________________ 31

1. WARNINGS AND SAFETY

Read this User Manual carefully, as well as the User Manuals for other N-Com kits that

you will be using with the N-Com Bluetooth kit3. Read the simple rules listed below.

Failure to comply with these rules may lead to dangerous situations.

Caution: The product cannot be used in official or non-official competitions,

motordromes, circuits, racing tracks and the like.

Caution: Installation of the N-Com Bluetooth kit3 system results in a weight increase

of approximately 60g, which is added to the weight of the helmet and of the

other accessories.

Warning: The electronic components of the N-Com system mounted inside the

helmet are not waterproof. Consequently, make sure the inside of the helmet,

including the comfort padding, does not get wet in order to avoid damage to the

system. If it does, remove the N-Com system and the helmet comfort padding

and let it air dry. Disconnect the battery connector and let it dry as well.

1.1. Road safety

Always obey all Traffic Regulations in force. While riding the motorcycle, your hands

should always be engaged in actually riding the vehicle. Any operation to the N-Com

system must be carried out with the vehicle stopped. Specifically:

Set your cell phone on automatic answer (see the cell phone instructions to do

this).

If your cell phone is not equipped with this function, first stop your vehicle in a

safe area, in compliance with Traffic Regulations and then answer the call.

Do not make any calls while riding. Stop your vehicle in a safe place in

compliance with Traffic Regulations, and then make the call.

Adjust the volume so that it does not cause a disturbance or distraction while

riding and at the same time allows you to distinctively hear background noises.

Do not operate your cell phone or other devices connected to N-Com while riding

your motorcycle.

In all cases, obey the Traffic Regulations and remember that riding the

motorcycle has absolute priority over any other maneuver.

1.2. Switching on the system in safe environments

When using the N-Com system, comply with all limitations and instructions

related to the use of cell phones.

Do not turn on your cell phone or the N-Com system whenever their use is

forbidden or when the devices can cause interference or dangerous situations.

Turn off while refueling. Do not use the N-Com system in filling stations. Do not

use the device near combustible materials or chemical products.

Turn off in proximity to explosive materials.

1.3. Interferences

All phones and devices with wireless signal transmission are subject to interferences

that may affect the performance of the device connected to them. These interferences

are not ascribable to a defect of the N-Com system.

1.4. Appropriate use

Use the device only in the normal position, as described in the product

documentation. Do not attempt to disassemble, tamper with or modify any part of the

N-Com system.

Caution: Adjust the volume of the N-Com system (where provided) and of the audio

sources connected to it before you use the system on the road.

Caution: Adjusting the volume to very high levels may cause damage to your

hearing.

Caution: Adjust the volume of the N-Com system (where provided) and of the audio

sources connected to it so as to avoid audio reproduction at high volumes.

Constant exposure to high audio volumes may damage your hearing.

Caution: An incorrect installation of the system in the helmet may alter the

aerodynamic and safety characteristics of the helmet itself, thus creating

dangerous conditions. Install the N-Com system according to the instructions

provided in the product documentation. In case of doubt, please contact your

local N-Com dealer.

Warning: Listening to other equipment should not interfere with driving the vehicle,

which must be the top priority at all times. Carry out all operations on the

electronic equipment and on the N-Com system with the vehicle stopped, in

compliance with Traffic Regulations.

Caution: Bluetooth Kit3 allows radio reception. Any radio licence fees are to the

user’s charge.

1.5. Qualified personnel

Only qualified personnel can carry out technical assistance on this product. In

case of any malfunction, always turn to your local dealer.

The helmet is a safety device. Tampering with it and/or with the electronic

system inside the helmet, in addition to invalidating the product warranty, can

also lead to dangerous situations.

1.6. Accessories and batteries

Only use the type of batteries, battery chargers and accessories approved by

Nolan for the specific model.

The use of a battery type different from the recommended one may lead to

dangerous situations and invalidate the warranty.

Contact your local dealer to see about the availability of approved accessories.

When disconnecting the power supply cable of any accessory or of the battery

charger, always grab and pull the plug not the cable.

Do not use batteries for purposes other than the prescribed ones.

Never use batteries or battery chargers that turn out to be damaged.

Do not short-circuit the battery.

Keep the battery at a temperature between 0° / +45°C (charging); -20° /

+60 °C (in use).

Danger of fire or explosion: do not throw the batteries into a fire nor expose

them to high temperatures!

Do not throw out batteries together with household refuse. The batteries should

be disposed of in compliance with local regulations

Do not wear the helmet while the battery is recharging.

The helmet should never be left within the reach of unsupervised children in

order to prevent damage to their health caused by access to the batteries.

Battery Lithium Ion593847 Lithium 3,7V – 800mAh

Battery charger FY0901000 110/240v – 50/60 Hz

1.7. Disposal

Refer to this user manual and to manuals related to other parts of the N-Com system

in order to disassemble the system from the helmet. Once the system has been

disassembled, dispose of it according to the following instructions:

The presence of a crossed-out wheelie bin indicates that in the

European Union the product is subject to separate collection at the

end of its useful life (European Directive 2002/96/EC).

Do not dispose of these products together with undifferentiated urban

waste.

The proper disposal of obsolete equipment contributes to preventing possible

negative consequences on people’s health and on the environment.

For more detailed information on the disposal of obsolete equipment, contact your

municipality, a waste disposal service or the store where the product was

purchased.

2. CONTENT OF THE PACKAGING

The N-Com Bluetooth Kit3 package contains:

e-box Bluetooth kit3

PC connection cable

Multimedia Wire2

Rechargeable battery Battery charger

3. INSTALLATION

Bluetooth Kit3 can be installed on all Nolan helmets pre-set for the N-Com system.

In order to use the N-Com Bluetooth Kit3 system, the Nolan helmet must be

equipped with the Basic Kit2 (or Basic Kit), sold separately.

Note: Before using the N-Com Bluetooth Kit3 system, the battery must be installed

and recharged (see instructions for Basic Kit).

Install the Basic Kit2 (or Basic Kit) on the helmet, according to the specific

instructions.

Fig. 1

Fig. 2

Remove the N-Com protection plate from the helmet (Fig. 1).

The new Bluetooth Kit3 system is equipped with its own gasket that protects against

water seepage. Remove the gasket in case you have previously applied it on the

helmet (Fig. 2).

Position the e-box in the relevant housing. First insert the front part, then press

down on the e-box until both hooks fully click. To remove the e-box, press the two

sliding hooks at the same time until the e-box comes out.

Warning: Do not leave the helmet exposed to atmospheric agents without the e-box

or the protection plate provided with the helmet.

4. SYSTEM CHARACTERISTICS

N-Com Bluetooth Kit3 allows wireless connection to a mobile phone, a satellite

navigator, and an MP3 A2DP player using Bluetooth technology.

N-Com Bluetooth Kit3 is equipped with FM radio with RDS function, and allows the

pre-setting of 6 radio stations.

The system can also be used for wireless intercom communication between two

helmets, provided both helmets are equipped with a Bluetooth system from the N-

Com, X-Series or MULTI lines, or for cable intercom communication with another

helmet equipped with Basic Kit2 or Basic Kit MULTI.

The system can be expanded by means of a Multimedia Wire accessory, which is used

for cable connection to multimedia sources such as MP3 players, satellite navigators,

GMRS and PMR radio for bike-to-bike communication, and audio systems pre-fit on

motorcycles.

Bluetooth Kit3 can be managed, updated and customised using the “N-Com

Wizard” programme, which can be downloaded from the “Download” section

of the Internet site www.n-com.it

4.1. Basic functions

All N-Com system functions are available through the operation of three pushbuttons:

“”, “on” and “”. Every time the system is given a command, a special acoustic

signal can be heard, which varies depending on the function being requested. This

way, all the functions can be used while wearing the helmet.

The type of command given to the system depends on how long the pushbutton is

pressed.

System ON Press “on” and keep it pressed for about 2 seconds, until the

LEDs turn on and you hear a beep in the headset.

System OFF Press “on” and keep it pressed for about 4 seconds, until the

LEDs turn off and you hear a beep in the headset.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere N-Com Fahrradzubehör Handbücher

N-Com

N-Com ESS Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung

N-Com bluetoothk it3 Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken