Napoleon B52NG-1 Bedienungsanleitung

FRENCH PG. 9

W415-2744 / A / 11.04.19

ADD MANUAL TITLE

Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030

Phone 1 (866) 820-8686 • www.napoleon.com • [email protected]

CERTIFIED TO THE CANADIAN AND AMERICAN NATIONAL STANDARDS:

CSA 2.22 AND ANSI Z21.50 FOR VENTED DECORATIVE GAS APPLIANCES

INSTALLER:

Leave this manual with the appliance

CONSUMER:

Retain this manual for future reference

ADD PRODUCT CODE HERE (TRADE GOTHIC LT STD FONT)

NATURAL GAS MODELS:

PROPANE GAS MODELS:

Product Name / Code

(MUST use title from Price Book)

ADD ____ ILLUSTRATED

ADD PRODUCT IMAGE

CSA /

INTERTEK

LOGO

SAFETY INFORMATION

- Do not store or use gasoline or other

ﬂammable vapors and liquids in the vicinity of

this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch; do not

use any phone in your building.

• Immediately call your gas supplier from a

neighbour’s phone. Follow the gas

supplier’s instructions.

• If you cannot reach your gas supplier, call

the ﬁre department.

- Installation and service must be

performed by a qualiﬁed installer, service

agency, or the supplier.

This appliance may be installed in an aftermarket,

permanently located, manufactured home (USA

only) or mobile home, where not prohibited by

local codes.

This appliance is only for use with the type of gas

indicated on the rating plate. This appliance is

not convertible for use with other gases, unless

a certiﬁed kit is used.

FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly

could result in serious injury, death, or

property damage.

WARNING

ENGLISH

$10.00

FOR INDOOR USE ONLY

IF INSTALLATION + OPERATION, ADD SERIAL

NUMBER LABEL HERE

IF SEPARATE MANUALS, ADD “PLACE

BARCODE LABEL ON THE OWNER’S MANUAL”

B52NG-1

B52PG-1

INSTALLATION AND

OPERATION MANUAL

HDX52-2

Glass Burner Assembly

W415-2744 / A / 11.04.19

table of contents

A. Remove the door,

refer to installation

instructions. Remove

the 8 securing screws

and lift the plate

up and out of the

appliance. Gasket

may need to be

replaced if damaged.

This glass burner assembly is approved for use in the HDX52-1 gas appliance only. It is not approved for use as a

stand alone appliance or in conjunction with any other appliance.

1.0 general information 2

2.0 installation 2

2.1 access panel 2

2.2 burner assembly 2

2.3 bulkheads 3

2.4 media tray 3

2.5 glass media 4

3.0 adjustment 5

3.1 ﬂame characteristics 5

3.2 venturi adjustment 5

4.0 replacement parts 6

4.1 overview 6

4.2 B52NG-1 glass burner 7

2.1 access panel

2.2 burner assembly

INSIDE APPLIANCE

OUTSIDE APPLIANCE

note:

Install decorative panels before burner assembly.

A. Attach the burner assembly to the

ﬁrebox base with the screws supplied.

1.0 general information

2.0 installation

WARNING:

This product can expose you to chemicals including lead and lead compounds,

which are known to the State of California to cause cancer, and chemicals including carbon

monoxide, which are known to the State of California to cause birth defects or other reproduc-

tive harm. For more information, go to www.P65Warnings.ca.gov.

The information throughout this manual is believed to be correct at the time of printing. Wolf Steel Ltd. reserves

the right to change or modify any information within this manual at any time without notice. Changes, other than

editorial are denoted by a vertical line in the margin.

note:

W415-2744 / A / 11.04.19 3

installation

A. Connect the main burner gas ﬂex line and the

pilot line to the gas ﬁttings on the bulkheads

located under the valve access opening.

Care must be taken to ensure the pilot line is

not kinked or damaged and ensure gas tight

connections are made.

2.3 bulkheads

B. Connect the pilot electrode lead to the

bulkhead matching the 3/16" ﬂag with the

3/16" bulkhead spade. Do the same with the

1/4” spark lead to the 1/4” bulkhead spade.

C. Ensure the venturi tube is over the oriﬁces

before lighting.

D. Check for gas leaks by brushing on a soap

and water solution. Do not use open ﬂame.

E. After leak test has been performed re-install

access panel with gasket.

2.4 media tray

A. Place the burner support over the pan burner as

shown below.

B. Align the holes in the media tray with the holes in

the pan burner.

note:

Bulkhead covers need to be removed. Refer to

installation manual for removal instructions.

Pilot

Electrode

Lead

Bulkhead

Venturi

Tube

Ori¿ce

Main

Burner Gas

Connection

Pilot Tube

Gas Connection

MEDIA TRAY

BURNER SUPPORT

BURNER

SUPPORT

W415-2744 / A / 11.04.19

installation

note:

Do not cover the burner at the pilot opening.

2.5 glass media

!WARNING

• Clean the glass media prior to installation. Before applying the cleaned glass, ensure that it is dry.

• Do not change or substitute the glass media material provided with this appliance. If replacing, use only the

replacement glass media available from your local authorized dealer / distributor.

• Glass media over the burner must not be more than one layer high. More than one layer over the burner will

cause ﬂame lifting and sooting problems.

• Do not place any media (glass or vermiculite) in or around the pilot opening and/or on the burner ports. This

will interfere with the pilot operation.

Evenly spread the glass media onto the media tray, covering the burner tube and tray. Ensure no glass

media falls into the pilot opening. If this happens, insert a clean bag into your vacuum cleaner and vacuum

out the glass media. Replacement glass can be purchased from your local dealer / distributor.

Cleaning Glass Media

Glass media may have a ﬁne oil residue that needs to be cleaned prior to installation. Clean the glass with

mild dish soap, drain, rinse thoroughly and dry before placing over the burner.

Do not use more media than what was supplied with the appliance.

note:

PILOT

OPENING

W415-2744 / A / 11.04.19 5

Burner Air Shutter Openings

P 7/16"

NG 3/8"

3.0 adjustment

3.1 ﬂame characteristics

3.2 venturi adjustment

It’s important to periodically perform a visual check of

the pilot and burner ﬂames. Compare them to the

illustration provided. If any ﬂames appear abnormal,

call a service person.

Flame must envelop

upper

3/8" to 1/2"

(12.7mm - 9.5mm) of

Flame sensor

3/8” - 1/2”

(9.5mm - 12.7mm)

This appliance has an air shutter that has been factory set open according to

the chart below:

Regardless of venturi orientation, closing the air shutter will cause a more

yellow ﬂame, but can lead to carbonization. Opening the air shutter will cause

a more blue ﬂame, but can cause ﬂame lifting from the burner ports. The ﬂame

may not appear yellow immediately; allow 15 to 30 minutes for the ﬁnal ﬂame

colour to be established.

AIR SHUTTER ADJUSTMENT MUST ONLY BE DONE BY A QUALIFIED

INSTALLER.

AIR

SHUTTER

OPENING

VENTURI

BURNER

ORIFICE

It is important that the oriﬁce is securely inserted into the venturi.

note:

W415-2744 / A / 11.04.19

4.0 replacement parts

!WARNING

• Failure to position the parts in accordance with this manual or failure to use only parts speciﬁcally approved

with this appliance may result in property damage or personal injury.

Contact your dealer for questions concerning prices and policies on replacement parts. Normally, all parts can

be ordered through your Authorized dealer / distributor.

For warranty replacement parts, a photocopy of the original invoice will be required to honour the

claim.

When ordering replacement parts always give the following information:

• Model & Serial Number of appliance

• Installation date of appliance

• Part number

• Description of part

• Finish

Parts, part numbers, and availability are subject to change without notice.

Parts identiﬁed as stocked will be delivered within 2 to 5 business days for most delivery

destinations.

Parts not identiﬁed as stocked will be delivered within a 2 to 4 week period, for most cases.

Parts identiﬁed as ‘SO’ are special order and can take up to 90 days for delivery.

Items may not appear exactly as illustrated.

Ref. Part Number

Burner assembly, glass

B52NG/PG-1

Inner baseW035-0345

W585-0834 Vent pipe shield

For replacement parts,

refer to “B52NG-1 Glass

Burner” section.

4W215-0182 Deﬂector

Description Stocked

Ref.

art

escr

tocke

4.1 overview

W415-2744 / A / 11.04.19 7

replacement parts

Items may not appear exactly as illustrated.

Ref. Part Number Description

1W655-0514 BOWL SUPPORT

2W715-0978 Media bowl trim

3W290-0270 Venturi gasket

4W720-0169 Venturi

5W080-1477 Left burner bracket

6W200-0461 Pilot cover

7W710-0071 Media bowl assembly

8W010-2863 Pilot assembly (NG)

Ref. Part Number Description

10 W010-3388 Pan burner assembly

11 W255-0002

12 W500-0767 Venturi support plate

13 W456-0017 Burner oriﬁce #17 (NG)

14 W456-0043 Burner oriﬁce #43 (P)

15 W080-1479 Burner bracket

16 W080-1478 Right burner bracket

655

9W080-1480 Pilot bracket

8W010-2900 Pilot assembly (P) 17 W100-0167 Burner assembly (#3, #4 & #10)

Stocked Stocked

f. Part N

Descr

tocked

art

escr

tocke

Bowl support

Yes

Tube ﬁtting

4.2 B52NG-1 glass burner

NAPOLEON CELEBRATING OVER 40 YEARS

OF HOME COMFORT PRODUCTS

AAAAA

PPPP

OOO

FFFFF

7200, Route Transcanadienne, Montréal, Québec H4T 1A3

24 Napoleon Road, Barrie, Ontario, Canada L4M 0G8

214 Bayview Drive, Barrie, Ontario, Canada L4N 4Y8

103 Miller Drive, Crittenden, Kentucky, USA 41030

Phone: 1-866-820-8686

napoleon.com

FRANÇAIS

W415-2744 / A / 11.04.19

ADD MANUAL TITLE

ADD PRODUCT CODE HERE (TRADE GOTHIC LT STD FONT)

Product Name / Code

(MUST use title from Price Book)

ADD ____ ILLUSTRATED

ADD PRODUCT IMAGE

CSA /

INTERTEK

LOGO

$10.00

MODÈLES DE GAZ NATUREL

MODÈLES DE PROPANE

INSTALLATEUR:

Laissez ce manuel avec l’appareil

PROPRIÉTAIRE:

Conservez ce manuel pour consultation

ultérieure

CONSIGNES DE SÉCURITÉ

- N’entreposez pas et n’utilisez pas d’essence

ou autres liquides et vapeurs inﬂammables à

proximité de cet appareil ou tout autre appareil.

- QUE FAIRE SI VOUS DÉTECTEZ UN

ODEUR DE GAZ:

• N’allumez aucun appareil.

• Ne touchez à aucun interrupteur

électrique; n’utilisez aucun téléphone dans

votre immeuble.

• Appelez immédiatement votre fournisseur

de gaz d’un téléphone voisin. Suivez ses

instructions.

• Si vous ne pouvez pas rejoindre votre

fournisseur de gaz, appelez le service des

incendies.

- L’installation et l’entretien doivent être faits par

un installateur qualiﬁé, une agence d’entretien

ou le fournisseur.

Cet appareil peut être installé dans une maison

préfabriquée (mobile) déjà installée à demeure

si les règlements locaux le permettent.

Cet appareil doit être utilisé uniquement

avec le type de gaz indiqué sur la plaque

d’homologation. Cet appareil ne peut être

converti à d’autres gaz, sauf si une trousse de

conversion est utilisée.

RISQUE D’INCENDIE OU D’EXPLOSION

Incapacité à suivre ces avertissements

exactement peuvent entraîner de grave

blessures, des pertes de vie ou des

dommages matériels.

AVERTISSEMENT!

Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030

Téléphone 1(866)820-8686 • www.napoleon.com • [email protected]

CERTIFIÉ SELON LES NORMES NATIONALES CANADIENNES ET AMÉRICANES:

CSA 2.22 ET ANSI Z21.50 POUR LES APPAREILS À GAZ DÉCORATIF À ÉVACUATION

POUR USAGE INTÉRIEUR SEULEMENT

FRANÇAIS

IF INSTALLATION + OPERATION, ADD SERIAL

NUMBER LABEL HERE

IF SEPARATE MANUALS, ADD “PLACE

BARCODE LABEL ON THE OWNER’S MANUAL”

B52NG-1

B52PG-1

MANUEL D’INSTALLATION

ET D’OPÉRATION

HDX52-2

Ensemble de Brûleur avec

Plateau Décoratif Arqué et

Braises de Verre CrystalineMD

W415-2744 / A / 11.04.19

table de matières

A. Une fois que vous

avec enlevez

de la porte (voir

les instructions

d’installation), enelvez

les 8 vis de ﬁxation

et soulevez la plaque

et hors de l’appareil.

Joint d’étanchéité

être remplacé s’il est

endommagé.

Cet ensemble de brûleur pour braises vitriﬁées est approuvé pour utilisation dans l’appareil au gaz HDX52-1 seule-

ment. Il n’est pas approuvé pour utilisation comme appareil autonome ou avec n’importe quel autre appareil.

1.0 information générale 10

2.0 installation 10

2.1 panneau d’accès 10

2.2 assemblage de brûleur 10

2.3 raccords 11

2.4 plateau 11

2.5 braises vitriﬁées 12

3.0 réglages 13

3.1 caractéristiques de ﬂamme 13

3.2 réglage de venturi 13

4.0 pièces de rechange 14

4.1 vue d’ensemble 14

4.2 B52NG-1 brûleur en verre 15

2.1 panneau d’accès

2.2 assemblage de brûleur

INTÉRIEUR

EXTÉRIEUR

note:

Installez des panneaux décoratifs avant

l’assemblage du brûleur.

A. Fixez le brûleur à la base de la chambre

de combustion à l’aide des 4 vis fournies.

1.0 information générale

2.0 installation

AVERTISSEMENT:

Ce produit peut vous exposer à des substances chimiques incluant le

plomb et les composés de plomb qui, selon l’État de Californie, causeraient le cancer, et des

substances chimiques incluant le monoxyde de carbone qui, selon d’État de Californie, cause-

raient des malformations congénitales ou autres dangers pour la reproduction.

Pour de plus amples renseignements, visitez le www.P65Warnings.ca.gov.

L’information contenue dans ce manuel est jugée correcte au moment de l’impression. Wolf Steel Ltée. se

réserve le droite de modiﬁer ou de modiﬁer toute information contenue dans ce manuel à tout moment sans

préavis. Les modiﬁcations, autre que les éditoriaux, sont désignées par une ligne verticale dans la marge.

note:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Napoleon Kaminzubehör Handbücher

Napoleon

Napoleon SLF Bedienungsanleitung

Napoleon

Napoleon DBPEX36 Bedienungsanleitung

Napoleon

Napoleon GS831C Bedienungsanleitung

Napoleon

Napoleon LPS62 Bedienungsanleitung

Napoleon

Napoleon NEFP33-0114M Bedienungsanleitung

Napoleon

Napoleon Zen ZD42BK Bedienungsanleitung

Napoleon

Napoleon PRPH35 Bedienungsanleitung

Napoleon

Napoleon BKE Bedienungsanleitung

Napoleon

Napoleon GDS28 Bedienungsanleitung

Napoleon

Napoleon NP841KT Bedienungsanleitung

Napoleon

Napoleon AX36 Bedienungsanleitung

Napoleon

Napoleon CFF Bedienungsanleitung

Napoleon

Napoleon NCEX36 Bedienungsanleitung

Napoleon

Napoleon GD849KT Bedienungsanleitung

Napoleon

Napoleon PRP30 Bedienungsanleitung

Napoleon

Napoleon FPGI30 Bedienungsanleitung

Napoleon

Napoleon GDS50 Bedienungsanleitung

Napoleon

Napoleon B52NL-1 Bedienungsanleitung

Napoleon

Napoleon FTD42BK Bedienungsanleitung

Napoleon

Napoleon GSS48 Bedienungsanleitung

Napoleon

Napoleon GS67-1 Bedienungsanleitung

Napoleon

Napoleon ROGUE SE625-1 Bedienungsanleitung

Napoleon

Napoleon EFCN Bedienungsanleitung

Napoleon

Napoleon B52NTL Bedienungsanleitung

Beliebte Kaminzubehör Handbücher anderer Marken

Valor

Valor L2 1700K Bedienungsanleitung

Exodraft

Exodraft Xzense Bedienungsanleitung

Whalen

Whalen Ruso MNFP62BF23-6 Bedienungsanleitung

Lopi

Lopi Hearthview 864 Bedienungsanleitung

Woodstock Soapstone

Woodstock Soapstone Fireview 201 Bedienungsanleitung

EdilKamin

EdilKamin SERBATOIO 250 Kurzanleitung

Bronpi

Bronpi KIT-1 Bedienungsanleitung

Town & Country Fireplaces

Town & Country Fireplaces 22150051 Bedienungsanleitung

Travis Industries

Travis Industries 33 DVI Bedienungsanleitung

Superior

Superior ASD3628-TI Bedienungsanleitung

pleasant hearth

pleasant hearth OFP28WG Bedienungsanleitung

IHP

IHP Astria Series Bedienungsanleitung

Firegear

Firegear FG-H-2110SS Bedienungsanleitung

Nibe

Nibe Contura C i31 Bedienungsanleitung

kozy heat

kozy heat KZK-052 Bedienungsanleitung

SimpliFire

SimpliFire SF-WM36 Bedienungsanleitung

Bluegrass Living

Bluegrass Living BC18NR Kurzanleitung

pleasant hearth

pleasant hearth IRIS SCROLL Bedienungsanleitung