Natech Nealact Bedienungsanleitung

Nealact

Lactate meter

User Manual

NEA_LEC_EN_ind01_06/01/2021

Dear Nealact User:

Thank you for purchasing the Nealact Lactate Meter Monitoring

System. This manual provides important information to help you to

use the system properly. Before using this product, please read the

following contents thoroughly and carefully.

If you have other questions regarding this product, please contact the

local customer service or place of purchase.

Intended Use

This system is intended for use outside the body (in vitro diagnostic

use) to quantitatively measure the lactate levels in whole blood. It is

for home use or for healthcare professional use. It should not be used

for diagnosis or screening of diseases.

The lactate test strip uses fresh capillary whole blood samples from

the fingertips, and from venous whole blood. Professionals may use

the test strips to test capillary and venous blood sample immediately;

home use is limited to capillary whole blood testing immediately.

Test Principle

Your system measures the amount of lactate in whole blood. The

lactate testing is based on the measurement of electrical current

generated by the reaction of lactate with the reagent of the strip. The

meter measures the current, calculates lactate level, and displays the

result. The strength of the current produced by the reaction depends

on the amount of lactate in the blood sample.

IMPORTANT SAFETY PRECAUTIONS

READ BEFORE USE

1. Use this device ONLY for the intended use described in this manual.

2. Do NOT use accessories which are not specified by the manufacturer.

3. Do NOT use the device if it is not working properly or if it is damaged.

4. The lactate test strip has not been tested in NICU (Neonatal Intensive

Care Unit)

5. This device does NOT serve as a cure for any symptoms or diseases.

The data measured is for reference only. Always consult your doctor

to have the results interpreted.

6. Before using this device to test lactate, read all instructions thoroughly

and practice the test. Carry out all the quality control checks as

directed.

7. Keep the device and testing equipment away from young children.

Small items such as the battery cover, batteries, test strips, lancets

and vial caps are choking hazards.

8. Use of this instrument in a dry environment, especially if synthetic

materials are present (synthetic clothing, and carpets etc.) may cause

damaging static discharges that may cause erroneous results.

9. Do NOT use this instrument in close proximity to sources of strong

electromagnetic radiation, as these may interfere with the accurate

operation.

10. Proper maintenance and periodically control solution test are

essential to the longevity of your device. If you are concerned about

your accuracy of measurement, please contact the local customer

service or place of purchase for help.

KEEP THESE INSTRUCTIONS IN A SAFE PLACE

 
 
 TABLE OF CONTENTS 
BEFORE YOU BEGIN...............................................................................................1
Important Information.................................................................. 1
Meter Overview...........................................................................2
Display Screen............................................................................3
Nealact Lactate Test Strip ...........................................................4
SETTING THE METER .............................................................................................5
THE MEASURING MODE.........................................................................................7
Lactate Testing............................................................................7
QUALITY CONTROL TESTING ...............................................................................8
When Should the Lactate Control Solution Test Be Performed? .. 8
Performing a Control Solution Test..............................................8
TESTING WITH BLOOD SAMPLE.........................................................................10 
Preparing the Lancing Device for Blood Testing ........................ 10 
Preparing the Puncture Site ...................................................... 10 
Performing a Blood Test.............................................................11 
METER MEMORY ...................................................................................................13 
Reviewing Test Results ............................................................. 13 
BLUETOOTH PAIRING...........................................................................................14 
MAINTENANCE ......................................................................................................16 
Battery ......................................................................................16 
Replacing the Battery................................................................ 16 
Caring for Your Meter................................................................ 17 
Caring for Your Test Strips......................................................... 17 
Important Control Solution Information......................................18 
MEASUREMENT RESULT READINGS .................................................................19 
Lactate Testing.......................................................................... 19 
Reference Values...................................................................... 19 
SYSTEM TROUBLESHOOTING ............................................................................20 
Error Messages.........................................................................20 
Troubleshooting ........................................................................ 21 
SYMBOL INFORMATION .......................................................................................23 
SPECIFICATIONS ...................................................................................................24 
PURCHASE INFORMATION ..................................................................................25 
CONTACT INFORMATION .....................................................................................26 

BEFORE YOU BEGIN

Important Information

•Severe dehydration and excessive water loss may cause

readings which are lower than actual values. If you believe you

are suffering from severe dehydration, consult a healthcare

professional immediately.

•If your lactate is lower or higher than usual, and you do not have

any symptoms of illness, first repeat the test. If you have

symptoms or continue to get results which are higher or lower

than usual, follow the treatment advice of your healthcare

professional.

•Use only fresh whole blood samples to test your lactate. Using

other substances will lead to incorrect results.

•If you are experiencing symptoms that are inconsistent with your

test results and you have followed all the instructions given in

this owner’s manual, contact your healthcare professional

•We do not recommend using this product on severely

hypotensive individuals or patients in shock. Please consult the

healthcare professional before use.

•The measurement unit used for indicating the concentration of

blood or plasma lactate is molarity (mmol/L).

Meter Overview

Test Strip Ejector

Eject the used strip by sliding up this button.

Bluetooth Indication Light

Display Screen

Left Scroll Button ( )

Adjust value decrement. Scroll the values in the memory.

M Button (M)

Enter the meter memory.

Right Scroll Button ( )

Enter Bluetooth function and adjust value increment. Scroll the

values in the memory.

Strip Indication Light

The indicator lights up in blue while the strip is inserted

Test Strip Slot

Insert test strip here to turn the meter on for testing.

Battery Compartment

Display Screen

Test Result

Measuring Mode

Gen – Sample test

Auto QC Mode

QC – Control solution test

Memory Mode

Date / Time

Error Message

Alarm Symbol

Measurement Unit

Low Battery Symbol

Lactate Symbol

Test Strip Symbol

Sample Drop Symbol

Code of strip

Nealact Lactate Test Strip

ATTENTION:

The front side of test strip should face up when inserting test

strip.

Test results might be wrong if the contact bar is not fully inserted into

the test slot.

NOTE:

The Nealact meter should only be used with Nealact Lactate test

strips. Using other test strips with this meter can produce inaccurate

results.

Absorbent Hole

Test Strip Handle

Confirmation Window

Contact Bars

SETTING THE METER

Before using your meter for the first time or if you change the meter

battery, you should check and update these settings.

Entering the Setting Mode (a)

Start with the meter off (no test strip inserted). Press and hold

and at the same time.

1. Setting the date

The sequence of the date setting is: YEAR → MONTH → DAY.

With the YEAR / MONTH / DAY flashing in sequence, press

or to select the correct number. Press M.

2. Setting the time format

Press or to select the desired time format (12h or 24h).

Press M.

3. Setting the time

With the HOUR / MINUTE flashing in sequence, press or

to select the correct number. Press M.

4. Setting the buzzer

With the buzzer displays, press or to switch between

“On” and “Off”. Press M.

5. Deleting the memory

With “dEL” and “ ” on the display, press to select “no” to

keep the results in memory then press Mto skip. To delete all

the results, press and select “yes”to delete all the memory

records.

Andere Handbücher für Nealact

Inhaltsverzeichnis

Andere Natech Messgerät Handbücher

Natech

Natech Nealact Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung