Nathan House Bedienungsanleitung
1
Design
the layout of your space
with the Nathan House
Prepare the layout of your space. ................................................................................................................................... p. 2
Choose your façades, bushes and options. ..................................................................................... p. 3
Calculate the dimensions of your layout.................................................................................................. p. 4
Assembly rules ............................................................................................................................................................................................................................ p. 5-6
February 2014
2
•Prepare the layout of your space.
Choose your façades, bushes and options.
Calculate the dimensions of your layout.
Assembly rules
Design of your setup
Calculate your available space.
Define the shape of your Nathan House configuration: in a straight line,
with corners, enclosed by the roof...
Choose the façades and bushes, as well as the Clorofile partitions or activity
units required for your layout, based on their functions and dimensions.
The dimensions of your layout are calculated in the following manner: for
façades and bushes, add the centre-to-centre distances, that is, the distance
between the top fastening screws of the various elements.
Would you like to combine Nathan House façades
with partionnettes and activity units?
Ask us for the Clorofile purchasing guide:
Concevez
l’aménagement de votre espace
Préparez l’aménagementde votre espace
p. 2 - 3
Fixezles cloisonnettes avec les buissons
p. 4 - 5
Fixezles meubles d’activités entre eux
p. 6 - 7
Fixezles meubles d’activités avec les cloisonnettes
p. 8
Montez des accessoiressur les meubles d ’activités
p. 9
avec
le mobilier
Janvier2014
Centre-to-centre
distance (see p. 4)
Length 32 cm 32 cm 32 cm
11 cm
89 cm 70 cm
89 cm
380 cm
Prepare the layout of your space.
•Choose your façades, bushes and options.
Calculate the dimensions of your layout.
Assembly rules
3
Façades
Identical dimensions for the 5 façades
House roof
Wall mounting kit
372049
It is used to further reinforce the wall mounting.
Includes 2 additional corner fastening parts and fastenings for concrete and brick walls.
Bushes
The bushes ensure the stability of the assembly between the façades.
They are essential for certain configurations.
(see following pages)
Also see
Clorofile partitionnettes...
... and the Clorofile activity unit
372055
Includes 2 plasticised fabric roof sections and 4 horizontal bars.
Each façade is provided with a straight
mounting kit and a corner mounting kit.
Low bush
372531
High bush
372529
Fixed angle
high bush
372528
Shop counter
façade
372050
Windows façade
372051
Garage façade
372052
Flowered façade
372053
Entrance façade
372054
Centre-to-centre
distance: 89 cm
Length: 100 cm
The roof is fastened onto:
1 or 2 straight façades + 2 triangular façades
(at the purchaser’s
discretion)
Centre-to-centre
distance: 32 cm Centre-to-centre
distance: 32 cm
Centre-to-centre
distance: 22 cm
Length: 57 cm
Length: 57 cm Length: 34 cm
+
4
Prepare the layout of your space.
Choose your façades, bushes and options.
•Calculate the dimensions of your layout.
Assembly rules
Nathan house
exterior dimensions
L/W: 1.5 m × 1.4 m = 2.1 m2
interior dimensions
L/W: 1 m × 1 m = 1 m2
House façades with corners
exterior dimensions interior dimensions
L/W: 2.4 m × 1.3 m = 3.12 m2L/W: 2 m × 1 m = 2 m2
House façades in a line and bushes
L/W: 3.93 m × 0.34 m = 1.23 m2
Examples of assemblies
12.5 cm 11 cm32 cm 32 cm 22 cm89 cm
Total length: 3.76 metres
89 cm89 cm
High
bush
Low bush Fixed angle
high bush
Windows façade
straight
fastening
parts
Flowered
façade
Entrance
façade
Calculating your space
5
Prepare the layout of your space.
Choose your façades, bushes and options.
Calculate the dimensions of your layout.
•Assembly rules
Connection of 2 façades in a line
Connection of 3 façades in a line
Connection of 3 façades with corners
It is compulsory to stabilise the façades with a bush
at each end...
... or to stabilise the façades with bushes at one end
+ fasten the configuration to the wall.
It is compulsory to stabilise the façades with bushes
between each façade
+bushes at each end...
You must stabilise the façades with at least one bush between
two façades
+one bush at each end...
...or to stabilise the façades with at least one bush
between each façades
+one bush at one end
+fasten the configuration to the wall.
...or stabilise the façades with at least one
bush at the end
+fasten the configuration to the wall.
6
Prepare the layout of your space.
Choose your façades, bushes and options.
Calculate the dimensions of your layout.
•Assembly rules
Wall mounting with a corner bush
You can use the fixed angle high bush to fasten a configuration to the wall (fastenings sold separately).
Fastening with a partitionnette connector
You can use the partitionnette connector
to connect a façade to a Clorofile activity unit...
... but not as a wall connector
For high demand applications,
it is advised to double the bushes back
to back for maximum resistance to pushing.
Assembly Tips
!
The low and high bushes may be
fastened to each other back to back.
!
Don’t forget the wall mounting kit to
further reinforce the wall mounting.
It includes 2 additional corner fastening parts and fastenings
for concrete and brick walls.
!
Partitionnette
connector
372388
Inhaltsverzeichnis
Andere Nathan Spielzeug Handbücher
