National Instruments Network Adapter NI PXIe-6672 Bedienungsanleitung

INSTALLATION GUIDE

NI PXIe-6672

This guide contains instructions for installing your NI PXIe-6672

controller and NI-Sync software.

Installing the Software

Note Be sure to install the driver software before installing the NI PXIe-6672 hardware.

Complete the following steps to install the software:

1. Place the NI-Sync CD in your CD-ROM drive.

2. Click Install NI-Sync in the window that appears. If no window

appears, run the setup.exe program on the CD.

3. Follow the prompts to install the NI-Sync driver.

• Select Typical to install the driver and support for the

development environments present on your computer.

• Select Custom to manually select which components should be

installed.

4. Reboot the computer when prompted to do so, or shut down the

computer and install the hardware.

Installing the Hardware

The following are general installation instructions. Consult the chassis user

manual or technical reference manual for specific instructions and

warnings about installing new modules.

1. Power off and unplug the chassis.

2. Locate the System Timing Slot in your chassis. It is marked by either

a square glyph shown in Figure 1, or a square glyph with a circle inside

of it, as shown in Figure 2.

NI PXIe-6672 Installation Guide 2 ni.com

Figure 1. System Timing Device Slot Indicator Glyph without Circle

Figure 2. System Timing Device Slot Indicator Glyph on the NI PXIe-1062Q Chassis

Notes The slot number printed on the glyph may vary from chassis to chassis.

The circle inside of the square indicates that the slot may also be used as a PXI Express

peripheral slot.

3. Remove the filler panel for the PXI slot you located in step 2.

4. Ground yourself using a grounding strap or by holding a grounded

object. Follow the ESD protection precautions described in the

Unpacking section of Chapter 1, Introduction, of the NI PXIe-6672

User Manual.

5. Remove any packing material from the front panel screws and

backplane connectors.

6. Insert the NI PXIe-6672 into the PXI Express slot. Use the

injector/ejector handle to fully insert the module into the chassis.

7. Screw the front panel of the device to the front panel mounting rail of

the chassis.

8. Visually verify the installation. Make sure the module is not touching

other modules or components and is fully inserted into the slot.

9. Plug in and power on the chassis.

The NI PXIe-6672 is now installed.

©National Instruments Corporation 3 NI PXIe-6672 Installation Guide

Verifying the Installation

During the first boot following the software and hardware installation of

the NI PXIe-6672, Windows detects the device, and the NI-Sync driver

will initiate communication with it. A green access LED on the front panel

of the NI PXIe-6672 confirms that the device has been found and the driver

can communicate with it.

Where to Go for Support

The National Instruments Web site is your complete resource for technical

support. At ni.com/support you have access to everything from

troubleshooting and application development self-help resources to email

and phone assistance from NI Application Engineers.

National Instruments corporate headquarters is located at

11500 North Mopac Expressway, Austin, Texas, 78759-3504.

National Instruments also has offices located around the world to help

address your support needs. For telephone support in the United States,

create your service request at ni.com/support and follow the calling

instructions or dial 512 795 8248. For telephone support outside the United

States, contact your local branch office:

Australia 1800 300 800, Austria 43 662 457990-0,

Belgium 32 (0) 2 757 0020, Brazil 55 11 3262 3599,

Canada 800 433 3488, China 86 21 5050 9800,

Czech Republic 420 224 235 774, Denmark 45 45 76 26 00,

Finland 358 (0) 9 725 72511, France 01 57 66 24 24,

Germany 49 89 7413130, India 91 80 41190000, Israel 972 3 6393737,

Italy 39 02 413091, Japan 81 3 5472 2970, Korea 82 02 3451 3400,

Lebanon 961 (0) 1 33 28 28, Malaysia 1800 887710,

Mexico 01 800 010 0793, Netherlands 31 (0) 348 433 466,

New Zealand 0800 553 322, Norway 47 (0) 66 90 76 60,

Poland 48 22 3390150, Portugal 351 210 311 210, Russia 7 495 783 6851,

Singapore 1800 226 5886, Slovenia 386 3 425 42 00,

South Africa 27 0 11 805 8197, Spain 34 91 640 0085,

Sweden 46 (0) 8 587 895 00, Switzerland 41 56 2005151,

Taiwan 886 02 2377 2222, Thailand 662 278 6777,

Turkey 90 212 279 3031, United Kingdom 44 (0) 1635 523545

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.

Refer to the Terms of Use section on ni.com/legal for more information about National

Instruments trademarks. Other product and company names mentioned herein are trademarks or trade

names of their respective companies. For patents covering National Instruments products, refer to the

appropriate location: Help»Patents in your software, the patents.txt file on your CD, or

ni.com/patents.

Andere Handbücher für Network Adapter NI PXIe-6672

Inhaltsverzeichnis

Andere National Instruments Controller Handbücher

National Instruments

National Instruments IC-3173 Bedienungsanleitung

National Instruments

National Instruments sbRIO-9687 Bedienungsanleitung

National Instruments

National Instruments IC-3173 Bedienungsanleitung

National Instruments

National Instruments 73 Series Bedienungsanleitung

National Instruments

National Instruments myRIO-1950 Bedienungsanleitung

National Instruments

National Instruments SCXI USB-1357 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

National Instruments

National Instruments RMC-8354 Bedienungsanleitung

National Instruments

National Instruments PXI Series Bedienungsanleitung

National Instruments

National Instruments CompactRIO NI cRIO-9012 Bedienungsanleitung

National Instruments

National Instruments sbRIO-9607 Bedienungsanleitung

National Instruments

National Instruments FW-7344 Gebrauchsanweisung

National Instruments

National Instruments PXI-8109 Bedienungsanleitung

National Instruments

National Instruments Motion Control 7344 Bedienungsanleitung

National Instruments

National Instruments NI 8350 Bedienungsanleitung

National Instruments

National Instruments IC-3171 Bedienungsanleitung

National Instruments

National Instruments AT-GPIB Bedienungsanleitung

National Instruments

National Instruments IC-3120 Bedienungsanleitung

National Instruments

National Instruments NI cDAQTM-9138 Bedienungsanleitung

National Instruments

National Instruments cRIO-9063 Bedienungsanleitung

National Instruments

National Instruments NI-488.2 Bedienungsanleitung

National Instruments

National Instruments PXI-7344 Bedienungsanleitung

National Instruments

National Instruments cRIO-9033 Bedienungsanleitung

National Instruments

National Instruments NI PXIe-8840 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch