National Instruments 6583R Bedienungsanleitung

NI 6583R User Guide and Specifications

The NI 6583R is a single-ended and differential signaling device designed to work in conjunction with

your NI FlexRIO™FPGA module. The NI 6583 is available in two versions: one with low-voltage

differential signals (LVDS) and another with multipoint low-voltage differential signals (MLVDS). The

term, differential, in this document refers to both LVDS and MLVDS signals unless otherwise specified.

This document contains signal information and specifications for the NI 6583R, which is composed of

an NI FlexRIO FPGA module and the NI 6583. This document also contains tutorial sections that

demonstrate how to acquire data using a LabVIEW FPGA example VI and how to create and run your

own LabVIEW project with the NI 6583R.

Contents

How to Use Your NI FlexRIO Documentation Set ............................................................................. 3

Front Panel and Connector Pinouts ..................................................................................................... 4

Pin and Signal Tables .......................................................................................................................... 5

Block Diagrams ................................................................................................................................... 7

Connecting Cables and Accessories .................................................................................................... 12

Using Accessories................................................................................................................................ 12

Using Your NI 6583R with a LabVIEW FPGA Example VI.............................................................. 17

Creating a LabVIEW Project and Running a VI on an FPGA Target ................................................. 19

NI 6583 Component-Level Intellectual Property (CLIP) .................................................................... 23

Specifications....................................................................................................................................... 25

Compliance and Certifications............................................................................................................. 29

Where to Go for Support ..................................................................................................................... 30

NI 6583R User Guide and Specifications 2 ni.com

Note Before configuring your NI 6583R, you must install the appropriate software and hardware.

Refer to the NI FlexRIO FPGA Module Installation Guide and Specifications for installation

instructions. Figure 1 shows an example of a properly connected NI FlexRIO device.

Figure 1. NI 6583R

Note NI 6583R refers to the combination of your NI 6583 adapter module and your NI FlexRIO

FPGA module. NI 6583 refers only to your NI 6583 adapter module.

NI 6583 + NI FlexRIO FPGA Module = NI 6583R

NI 6583

©National Instruments Corporation 3 NI 6583R User Guide and Specifications

How to Use Your NI FlexRIO Documentation Set

Refer to Figure 2 and Table 1 for information about how to use your NI FlexRIO documentation set.

Figure 2. How to Use Your NI FlexRIO Documentation Set

Table 1. NI FlexRIO Documentation Locations and Descriptions

Document Location Description

NI FlexRIO FPGA

Module Installation

Guide and Specifications*

Available in your FPGA module

hardware kit and from the Start Menu.

Contains installation instructions for your

NI FlexRIO system and specifications for your

FPGA module.

NI Adapter Module User

Guide and Specifications*

Available in your adapter module

hardware kit and from the Start Menu.

Contains signal information, examples, and

specifications for your adapter module.

LabVIEW FPGA Module

Help*

Embedded in LabVIEW Help.Contains information about the basic functionality of

LabVIEW FPGA Module.

NI FlexRIO Help*Embedded in LabVIEW FPGA

Module Help.

Contains FPGA module, adapter module, and CLIP

configuration information.

LabVIEW Examples Available in NI Example Finder. Contains examples of how to run FPGA VIs and

Host VIs on your device.

Other useful information on ni.com

ni.com/ipnet Contains LabVIEW FPGA functions and intellectual property to share.

ni.com/flexrio Contains product information and data sheets for NI FlexRIO devices.

* These documents are also available at ni.com/manuals.

LabVIEW FPGA

Module Help

NI FlexRIO

Help

LabVIEW

Examples

INSTALL Hardware

and Software

CONNECT Signals

and Learn About

Your Adapter

Module

LEARN About

LabVIEW FPGA

Module

PROGRAM Your

NI FlexRIO System

in LabVIEW FPGA

Module

NI FlexRIO FPGA Module

Installation Guide and Specifications

NI FlexRIO Adapter Module

User Guide and Specifications

Are

You New to

LabVIEW FPGA

Module?

Yes No

NI 6583R User Guide and Specifications 4 ni.com

Front Panel and Connector Pinouts

Figure 3 shows the digital data and control (DDC) connector pin assignments for the NI 6583. DDC A

contains the single-ended lines and DDC B contains the differential lines.

Figure 3. NI 6583 Connector Pin Assignments

Caution Connections that exceed any of the maximum ratings of input or output signals on the

NI 6583R can damage the device and the chassis. NI is not liable for any damage resulting from such

signal connections. For the maximum input and output ratings for each signal, refer to the

Specifications section of this document.

Digital Data and Control B (DDC B)

LVDS

NI 6583

GND

PFI 1+

GND

PFI 2+

GND

PFI 3+

GND

DIO 0+

GND

DIO 1+

GND

DIO 2+

GND

DIO 3+

GND

DIO 4+

GND

DIO 5+

GND

DIO 6+

GND

DIO 7+

GND

DIO 8+

GND

DIO 9+

GND

DIO 10+

GND

DIO 11+

GND

DIO 12+

GND

DIO 13+

GND

DIO 14+

GND

DIO 15+

GND

PFI 1–

PFI 2–

PFI 3– / GND

DIO 0–

DIO 1–

DIO 2–

DIO 3–

DIO 4–

DIO 5–

DIO 6–

DIO 7–

DIO 8–

DIO 9–

DIO 10–

DIO 11–

DIO 12–

DIO 13–

DIO 14–

DIO 15–

3332

4544

6059

6968

RESERVED

DDC CLK OUT–

DDC CLK OUT+

RESERVED

STROBE–

STROBE+

RESERVED

GND

DDC CLK OUT

GND

DIO 1

PFI 3

DIO 3

GND

DIO 5

PFI 1

DIO 7

GND

DIO 9

GND

DIO 11

GND

DIO 13

GND

DIO 15

GND

DIO 17

GND

DIO 19

GND

DIO 21

GND

DIO 23

RESERVED

DIO 25

GND

DIO 27

GND

DIO 29

GND

DIO 31

GND

STROBE

GND

DIO 0

PFI 2

DIO 2

GND

DIO 4

RESERVED

DIO 6

GND

DIO 8

GND

DIO 10

GND

DIO 12

RESERVED

DIO 14

GND

DIO 16

GND

DIO 18

GND

DIO 20

GND

DIO 22

GND

DIO 24

GND

DIO 26

GND

DIO 28

GND

DIO 30

Digital Data and Control A (DDC A)

Single-ended

©National Instruments Corporation 5 NI 6583R User Guide and Specifications

Note If you design a custom cabling solution with the DDC B differential connector (779157-01)

and NI SHB12X-B12X cable (192344-01), the NI 6583 pinout is reversed at the end connector.

For example, the signal shown on pin 1 shown in Figure 3 maps to pin 73 at the end connector.

Pin and Signal Tables

Table 2 contains pin location and single-ended signal information for DDC A on the NI 6583.

Table 2. NI 6583 DDC A Connector Pins

Signal Name Pin(s) Signal Type Signal Description

DDC CLK OUT 33 Clock Terminal for the single-ended exported Sample clock.

STROBE 67 Clock External Sample clock source that can be used for source

synchronous acquisition.

DIO <0..31> 1, 3, 5, 7, 9, 11, 13, 15,

17, 19, 21, 23, 25, 27,

29, 31, 35, 37, 39, 41,

43, 45, 47, 49, 51, 53,

55, 57, 59, 61, 63, 65

Data Bidirectional single-ended digital I/O data channels

0 through 31.

PFI <1..3> 26, 30, 64 Control/Data Bidirectional single-ended digital I/O trigger channels

1 through 3.

GND 2, 4, 6, 10, 12, 14, 16,

18, 20, 22, 24, 28, 32,

34, 36, 38, 40, 42, 44,

46, 48, 50, 54, 56, 58,

62, 66, 68

Ground Ground reference for signals.

RESERVED 8, 52, 60 —These terminals are reserved for future use. Do not connect

to these pins.

NI 6583R User Guide and Specifications 6 ni.com

Table 3 contains pin location and differential signal information for DDC B on the NI 6583.

Table 3. NI 6583 DDC B Connector Pins

Signal Name Pin(s) Signal Type Signal Description

DDC CLK OUT+ 65 Clock Positive terminal for the differential exported Sample clock.

DDC CLK OUT– 66 Clock Negative terminal for the differential exported Sample clock.

STROBE+ 62 Clock Positive external Sample clock source that can be used for

dynamic acquisition.

STROBE– 63 Clock Negative external Sample clock source that can be used for

dynamic acquisition.

DIO <0..15>+ 14, 17, 20, 23, 26,

29, 32, 35, 38, 41,

44, 47, 50, 53, 56,

Data Positive bidirectional digital I/O data channels 0 through 15.

DIO <0..15>– 15, 18, 21, 24, 27,

30, 33, 36, 39, 42,

45, 48, 51, 54, 57,

Data Negative bidirectional digital I/O data channels 0 through 15

PFI <1..3>+ 2, 5, 8 Control Positive bidirectional digital I/O trigger channels 1 through 3.

PFI <1..3>– 3, 6, 9 Control Negative bidirectional digital I/O trigger channels 1 through 3.

GND 1, 4, 7, 10, 13, 16,

19, 22, 25, 28, 31,

34, 37, 40, 43, 46,

49, 52, 55, 58, 61,

64, 67, 70, 73

Ground Ground reference for signals.

RESERVED 11, 12, 68, 69, 71,

—These terminals are reserved for future use. Do not connect

to these pins.

©National Instruments Corporation 7 NI 6583R User Guide and Specifications

Block Diagrams

Figures 4 through 7 show the data flow through the NI 6583R. Single-ended data lines use standardized

voltage levels to interpret data as either a binary zero or a one in high-speed digital data transfers.

Differential data lines provide a low-noise, low-power, low-amplitude differential method for

high-speed digital data transfer.

Figure 4. Clock Input Signals

Figure 5. Differential Data and PFI Lines

DDC A STROBE

UserGclkLvds on

NI FlexRIO

FPGA Module

(I/O Module Clock 1)

UserGclkLvttl on

NI FlexRIO

FPGA Module

(I/O Module Clock 0)

DDC B STROBE

100 Ω

Data from

NI FlexRIO

FPGA Module

(GPIO Output)

Direction Control

from NI FlexRIO

FPGA Module

(GPIO Direction)

Data to

NI FlexRIO

FPGA Module

(GPIO Input)

DDC B Channel

100 Ω

NI 6583R User Guide and Specifications 8 ni.com

Figure 6. Single-Ended Data and PFI Lines

Figure 7. Clock Output Signals

Data to and from

NI FlexRIO

FPGA Module

(GPIO I/O)

Direction Control

from NI FlexRIO

FPGA Module

(GPIO Direction)

DDC A Channel

50 Ω

Clock from

NI FlexRIO

FPGA Module

(GPIO Output)

Output Enable

from NI FlexRIO

FPGA Module

(GPIO Direction)

Clock from

NI Flex RIO

FPGA Module

(GPIO Output)

Output Enable

from NI FlexRIO

FPGA Module

(GPIO Direction)

DDC B CLK OUT

100 Ω

DDC A CLK OUT

50 Ω

©National Instruments Corporation 9 NI 6583R User Guide and Specifications

Tables 4 and 5 list the NI 6583 connector signals and corresponding NI FlexRIO FPGA module signals

necessary for designing custom component-level IP (CLIP). The _CC suffix on the single-ended and

differential signals identifies channels that are capable of receiving a regional clock. Refer to the Block

Diagrams section of this document for more information about connecting signals from the NI 6583 to

the FPGA module.

Table 4. NI 6583 Single-Ended Signals and NI FlexRIO FPGA Module Signals

NI 6583 NI FlexRIO FPGA Module

Connector Signal Name GPIO I/O GPIO Direction

DDC A (Single-ended I/O) DIO 0 GPIO_16_n GPIO_16

DIO 1 GPIO_2_n GPIO_2

DIO 2 GPIO_19_n GPIO_19

DIO 3 GPIO_5_n_CC GPIO_5_CC

DIO 4 GPIO_20_n GPIO_20

DIO 5 GPIO_4_n_CC GPIO_4_CC

DIO 6 GPIO_7_n_CC GPIO_7_CC

DIO 7 GPIO_3_n GPIO_3

DIO 8 GPIO_23_n_CC GPIO_23_CC

DIO 9 GPIO_6_n_CC GPIO_6_CC

DIO 10 GPIO_22_n GPIO_22

DIO 11 GPIO_21_n GPIO_21

DIO 12 GPIO_25_n_CC GPIO_25_CC

DIO 13 GPIO_10_n GPIO_10

DIO 14 GPIO_24_n_CC GPIO_24_CC

DIO 15 GPIO_9_n GPIO_9

DIO 16 GPIO_12_n GPIO_12

DIO 17 GPIO_8_n GPIO_8

DIO 18 GPIO_27_n GPIO_27

DIO 19 GPIO_28_n GPIO_28

DIO 20 GPIO_11_n GPIO_11

DIO 21 GPIO_26_n_CC GPIO_26_CC

DIO22 GPIO_30_n GPIO_30

DIO 23 GPIO_15_n GPIO_15

DIO 24 GPIO_29_n GPIO_29

DIO 25 GPIO_14_n GPIO_14

NI 6583R User Guide and Specifications 10 ni.com

Note For the DIO and PFI lines, drive the GPIO Direction high for output and low for input.

For CLK OUT, drive the GPIO Direction high for enable and low for disable.

DDC A (Single-ended I/O) DIO 26 GPIO_50_n GPIO_50

DIO 27 GPIO_13_n GPIO_13

DIO 28 GPIO_32_n GPIO_32

DIO 29 GPIO_31_n GPIO_31

DIO 30 GPIO_49_n GPIO_49

DIO 31 GPIO_33_n GPIO_33

PFI 1 GPIO_0_n GPIO_0

PFI 2 GPIO_18_n GPIO_18

PFI 3 GPIO_1_n GPIO_1

STROBE GClk_SE —

CLK OUT GPIO_17_n GPIO_17

(as enable)

Table 4. NI 6583 Single-Ended Signals and NI FlexRIO FPGA Module Signals (Continued)

NI 6583 NI FlexRIO FPGA Module

Connector Signal Name GPIO I/O GPIO Direction

Inhaltsverzeichnis

Andere National Instruments E/A-System Handbücher

National Instruments

National Instruments PXIe-4339 Handbuch

National Instruments

National Instruments NI 7831R Bedienungsanleitung

National Instruments

National Instruments 9753 Bedienungsanleitung

National Instruments

National Instruments NI 9752 Bedienungsanleitung

National Instruments

National Instruments NI R Series Bedienungsanleitung

National Instruments

National Instruments PXIe-7822 Bedienungsanleitung

National Instruments

National Instruments NI USB-6008 Bedienungsanleitung

National Instruments

National Instruments Xmath Interactive Control Design Module ICDM Bedienungsanleitung

National Instruments

National Instruments NI 9401 Bedienungsanleitung

National Instruments

National Instruments 9215E Bedienungsanleitung

National Instruments

National Instruments SC-2071 Bedienungsanleitung

National Instruments

National Instruments NI 6581 Bedienungsanleitung

National Instruments

National Instruments 9269 Handbuch

National Instruments

National Instruments SC Express PXIe-4309 Bedienungsanleitung

National Instruments

National Instruments 9211 Handbuch

National Instruments

National Instruments FOUNDATION Bedienungsanleitung

National Instruments

National Instruments 9213E Bedienungsanleitung

National Instruments

National Instruments NI VISION PCI-8254R Bedienungsanleitung

National Instruments

National Instruments 622 Series Bedienungsanleitung

National Instruments

National Instruments PXIe-5764 Betriebsanleitung

National Instruments

National Instruments DAQ M Series Bedienungsanleitung

National Instruments

National Instruments NI 9485 Bedienungsanleitung

National Instruments

National Instruments NI 9216 Bedienungsanleitung

National Instruments

National Instruments NI 9754 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung