National Instruments NI 9219E Bedienungsanleitung

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

OPERATING INSTRUCTIONS AND SPECIFICATIONS

NI 9219E

4-Channel, 24-Bit, Universal Analog Input Module

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

NI 9219E Operating Instructions and Specifications 2 ni.com

This document describes how to use the National Instruments 9219E

and includes dimensions, terminal assignments, and specifications for

the NI 9219E. Visit ni.com/info and enter rdsoftwareversion

to determine which software you need for the modules you are using.

For information about installing, configuring, and programming the

system, refer to the system documentation. Visit ni.com/info and

enter cseriesdoc for information about C Series documentation.

Caution National Instruments makes no electromagnetic

compatibility (EMC) or CE marking compliance claims

for the NI 9219E. The end-product supplier is responsible

for conformity to any and all compliance requirements.

Caution The NI 9219E must be installed inside a suitable

enclosure prior to use. Hazardous voltages may be present.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

NI 9219E Dimensions

The following figure shows the dimensions of the NI 9219E.

Figure 1. NI 9219E Dimensions in Millimeters (Inches)

73.4 (2.89)

0.0 (0.00)

26.7 (1.05)

58.4 (2.30)

66.0 (2.60)

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

NI 9219E Operating Instructions and Specifications 4 ni.com

Connecting the NI 9219E

The NI 9219E has four 6-terminal spring-terminal connectors that

provide connections for four analog input channels.

Figure 2. NI 9219E Channel and Terminal Assignments

Ch 0

Ch 1

Ch 2

Ch 3

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table 1. NI 9219E Signal Names

Terminal Signal Name Signal Description

1T+ TEDS Data

2T– TEDS COM

3EX+/HI*Positive excitation or input signal

4HI Positive input signal

5EX–/LO*Negative excitation or input signal

6LO Negative input signal

*Depending on the mode, terminals 3 and 5 are either the excitation signals or the

input signals.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

NI 9219E Operating Instructions and Specifications 6 ni.com

Table 2. NI 9219E Terminal Assignments by Mode

Mode

Terminal

123456

Voltage T+ T–—HI LO —

Current T+ T–HI —LO —

4-Wire Resistance T+ T–EX+ HI EX–LO

2-Wire Resistance T+ T–HI —LO —

Thermocouple T+ T–—HI LO —

4-Wire RTD T+ T–EX+ HI EX–LO

3-Wire RTD T+ T–EX+ —EX–LO

Quarter-Bridge T+ T–HI —LO —

Half-Bridge T+ T–EX+ HI EX–—

Full-Bridge T+ T–EX+ HI EX–LO

Digital In T+ T–—HI LO —

Open Contact T+ T–HI —LO —

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Connecting the NI 9219E

Connect the positive signal of the signal source to the positive input

signal terminal (HI) and the negative signal of the signal source

to the negative input signal terminal (LO). Use the excitation

terminals if the sensor requires a separate excitation connection.

Refer to the NI 9219E Circuitry section for information about

connections in each mode.

Connecting Wires to the Spring-Terminal Connectors

Use a flathead screwdriver with a blade smaller than 2.3 × 1.0 mm

(0.09 × 0.04 in.) to connect wires to the detachable spring-terminal

connectors. Insert the screwdriver into a spring clamp activation

slot and press a wire into the corresponding connector terminal,

then remove the screwdriver to clamp the wire into the terminal.

Refer to the Specifications section for more information about

spring-terminal wiring. Refer to Figure 3 for an illustration of

connecting wires to the NI 9219E.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

NI 9219E Operating Instructions and Specifications 8 ni.com

Figure 3. Connecting Wires to the NI 9219E Spring-Terminal Connectors

Connecting TEDS Channels

The NI 9219E supports only Class II

TEDS sensors. Connect the

two TEDS lines to

TEDS Data (T+) and TEDS COM (T–) and

ensure that neither T+ nor T– is tied in common to any of the signal

inputs (terminals 3 through 6) on the NI 9219E. Visit ni.com/

info and enter the info code rdteds for information about

TEDS sensors.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Connecting Signal Sources to the NI 9219E

You can connect ground-referenced or floating signal sources to

the NI 9219E. If you make a floating connection between the signal

source and the NI 9219E, make sure the voltages on the positive

and negative connections are within the channel-to-earth working

voltage range to ensure proper operation of the NI 9219E. Refer to

the Specifications section for more information about operating

voltages and overvoltage protection.

Note For best signal quality, National Instruments

recommends using shielded cables and twisted pair

wiring whenever possible.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Inhaltsverzeichnis

Andere National Instruments E/A-System Handbücher

National Instruments

National Instruments FieldPoint FP-AI-100 Bedienungsanleitung

National Instruments

National Instruments PXIe-7867R Bedienungsanleitung

National Instruments

National Instruments NI 9423 Bedienungsanleitung

National Instruments

National Instruments REM-11152 Bedienungsanleitung

National Instruments

National Instruments R Series Bedienungsanleitung

National Instruments

National Instruments R Series Bedienungsanleitung

National Instruments

National Instruments myRIO-1950 Bedienungsanleitung

National Instruments

National Instruments NI 9239 Bedienungsanleitung

National Instruments

National Instruments NI 9226 Handbuch

National Instruments

National Instruments NI660 Series Bedienungsanleitung

National Instruments

National Instruments USB-9211A Bedienungsanleitung

National Instruments

National Instruments PCI/PXI-781 R Series Bedienungsanleitung

National Instruments

National Instruments 9232 Bedienungsanleitung

National Instruments

National Instruments NI 6581 Bedienungsanleitung

National Instruments

National Instruments PXIe-7822 Bedienungsanleitung

National Instruments

National Instruments cRIO-9075 Bedienungsanleitung

National Instruments

National Instruments R Series Intelligent DAQ PCI/PXI-783xR Bedienungsanleitung

National Instruments

National Instruments SCC-CI20 Bedienungsanleitung

National Instruments

National Instruments 9753 Bedienungsanleitung

National Instruments

National Instruments DAQCard-6533 Bedienungsanleitung

National Instruments

National Instruments 9262 Bedienungsanleitung

National Instruments

National Instruments 9218 Handbuch

National Instruments

National Instruments 9252 Handbuch

National Instruments

National Instruments NI USB-6008 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung