National Instruments NI WLS/ENET-9163 Bedienungsanleitung

USER GUIDE AND SPECIFICATIONS

NI WLS/ENET-9163

Wireless/Ethernet Carrier for NI WLS/ENET-9000 Series Devices

This user guide describes how to use the National Instruments

WLS/ENET-9163 carrier and lists specifications.

The NI WLS/ENET-9163 carrier provides a wireless or Ethernet data

acquisition interface for a select number of C Series I/O modules. Refer to

ni.com/daq for information about which C Series I/O modules are

supported by the NI WLS/ENET-9163 carrier.

The NI WLS/ENET-9163 carrier combines with an NI C Series I/O module

to form an NI WLS/ENET-9000 Series device, as shown in Figure 1.

Note Only the NI WLS-9163 carrier comes with an antenna for wireless deployment.

Figure 1. NI WLS/ENET-9163 Carrier Forming the NI WLS/ENET-9000 Series Device

Throughout this manual, the combined NI WLS/ENET-9163 carrier and

C Series I/O module is referred to as the NI WLS/ENET-9000 Series

device.

NI C Series I/O Module

NI WLS/ENET-9163 Carrier

NATIONAL

INSTRUMENTS

RESET

LINK/ACT

GND

PR0

PR1

10/100

INPUT9-30V

4.5 WMAX

NI WLS-9163

802.11gC SeriesCarrier

NATIONAL

INSTRUMENTS

RESET

LINK/ACT

GND

PR0

PR1

10/100

INPUT9-30V

4.5 WMAX

NI WLS-9163

802.11gC Series Carrier

WLSLINK

ACTIVE

ATUS

POWER

WLS

LINK

POWER

ACTIVE

STATUS

NI WLS/ENET-9000 Series Device

WLSLINK

ACTIVE

TUS

POWER

WLS

LINK

POWER

ACTIVE

STATUS

NI WLS/ENET-9163 Carrier User Guide and Specifications 2 ni.com

Dimensions

Figure 2 shows the NI WLS/ENET-9000 Series device dimensions.

Figure 2. NI WLS/ENET-9000 Series Device Dimensions

Safety Guidelines

Operate the NI WLS/ENET-9000 Series device only as described in this

user guide.

Note Some C Series I/O modules may have more stringent certification standards than the

NI WLS/ENET-9163 carrier, and the combined system may be limited by individual

component restrictions.

Caution The NI WLS/ENET-9000 Series device is not certified for use in hazardous

locations.

NATIONAL

INSTRUMENTS

ERROR

STATUS

PWR

7.179 in.

(182.36 mm)

8.436 in.

(214.27 mm)

3.745 in.

(95.11 mm)

4.012 in.

(101.90 mm)

1.466 in.

(37.24 mm)

1.356 in.

(34.43 mm)

WLS

LINK

©National Instruments Corporation 3 NI WLS/ENET-9163 Carrier User Guide and Specifications

Hot Surface This icon denotes that the component may be hot. Touching this component

may result in bodily injury.

Safety Guidelines for Hazardous Voltages

If hazardous voltages are connected to the module, take the following

precautions. A hazardous voltage is a voltage greater than 42.4 Vpk or

60 VDC to earth ground.

Caution Ensure that hazardous voltage wiring is performed only by qualified personnel

adhering to local electrical standards.

Caution Do not mix hazardous voltage circuits and human-accessible circuits on the same

module.

Caution Make sure that the NI WLS/ENET-9163 carrier and circuits connected to the

module are properly insulated from human contact.

Caution The NI WLS/ENET-9163 carriers provide no isolation, but some modules offer

isolation. Follow the safety guidelines for each module when using hazardous voltage.

Related Documentation

Each application software package and driver includes information about

writing applications for taking measurements and controlling measurement

devices. Check ni.com/manuals for the most recent hardware

documentation, and refer to Table 1 for a list of locations for driver and

application software documentation. The document location references in

this table assume you have NI-DAQmx 8.8 or later, and where applicable,

version 7.1 or later of the NI application software.

NI WLS/ENET-9163 Carrier User Guide and Specifications 4 ni.com

Table 1. NI Driver and Application Software Documentation

Software Document/Description Location/Topic

NI-DAQmx for

Windows

DAQ Getting Started

Guide—describes how to install

and use the NI-DAQmx driver

software for Windows and your

data acquisition (DAQ) device,

how to confirm the device is

operating properly, and how to

take an NI-DAQmx

measurement.

Start»Programs»National

Instruments»NI-DAQ»

DAQ Getting Started Guide

NI-DAQ Readme—includes

information about NI-DAQmx.

Start»Programs»National

Instruments»NI-DAQ»

NI-DAQ Readme

NI-DAQmx Help—explains how

to get started in your OS and

ADE; provides an NI-DAQmx

overview; includes information

about programming the most

common measurement tasks with

references to examples in CVI/C,

C++, .NET.

Start»Programs»National

Instruments»NI-DAQ»

NI-DAQmx Help

©National Instruments Corporation 5 NI WLS/ENET-9163 Carrier User Guide and Specifications

LabVIEW Getting Started with

LabVIEW—describes the

LabVIEW graphical

programming environment and

the basic LabVIEW features you

use to build data acquisition and

instrument control application.

Start»All Programs»National

Instruments»LabVIEW»

LabVIEW Manuals or navigate to

the labview\manuals directory

and opening

LV_Getting_Started.pdf

LabVIEW Help—provides

information about LabVIEW

programming concepts,

step-by-step instructions for

using LabVIEW, and reference

information about LabVIEW

VIs, functions, palettes, menus,

and tools.

Help»Search the LabVIEW Help

LabVIEW Help Topics Specific to NI-DAQmx

Includes overview information

and a tutorial to learn how to take

an NI-DAQmx measurement in

LabVIEW using the DAQ

Assistant.

From the Contents tab, Getting

Started»Getting Started with DAQ

Describes the LabVIEW

NI-DAQmx VIs and properties.

From the Contents tab,

VI and Function Reference»

Measurement I/O VIs and

Functions

Contains the conceptual and

how-to information you need

to acquire and analyze

measurement data in LabVIEW,

including common

measurements, measurement

fundamentals, NI-DAQmx key

concepts, and device

considerations.

From the Contents tab, Taking

Measurements

Table 1. NI Driver and Application Software Documentation (Continued)

Software Document/Description Location/Topic

NI WLS/ENET-9163 Carrier User Guide and Specifications 6 ni.com

LabWindows™/CVI™LabWindows/CVI Help

Data Acquisition

book—contains NI-DAQmx

measurement concepts and

step-by-step instructions about

creating a measurement task

using the DAQ Assistant.

Help»Contents, then select Using

LabWindows/CVI»

Data Acquisition»Taking an

NI-DAQmx Measurement in

LabWindows/CVI

LabWindows/CVI Help

NI-DAQmx Library

book—contains NI-DAQmx API

overviews and function

reference.

LibraryReference»

NI-DAQmx Library

Measurement

Studio/Microsoft

Visual Studio .NET

Microsoft Visual Studio .NET

Help/NI Measurement Studio

Help—contains NI-DAQmx

methods and properties.

Measurement Studio»

NI Measurement Studio Help and

select NI-DAQmx .NET Class

Library or NI-DAQmx Visual C++

Class Library

ANSI C without

NI Application

Software

NI-DAQmx Help Start»All Programs»National

Instruments»NI-DAQ»

NI-DAQmx Help

NI-DAQmx C Reference

Help—describes the NI-DAQmx

Library functions.

Start»All Programs»National

Instruments»NI-DAQ»

NI-DAQmx C Reference Help

Table 1. NI Driver and Application Software Documentation (Continued)

Software Document/Description Location/Topic

©National Instruments Corporation 7 NI WLS/ENET-9163 Carrier User Guide and Specifications

Device Documentation and Specifications

Check ni.com/manuals for the most recent device and software

documentation. If you do not have Web access, NI-DAQmx includes a

Documentation CD that includes documentation available when

NI-DAQmx released.

Training Courses

If you need more help getting started developing an application with

NI products, NI offers training courses. To enroll in a course or obtain

a detailed course outline, refer to ni.com/training.

Technical Support on the Web

For additional support, refer to ni.com/support or zone.ni.com.

.NET Languages

without

NI Application

Software*

NI-DAQmx .NET Help—contains

conceptual topics for using

NI-DAQmx with Visual C# and

Visual Basic .NET.

Start»All Programs»National

Instruments»NI-DAQ»

NI-DAQmx .NET Reference Help.

Expand NI Measurement Studio

Help»NI Measurement Studio

.NET Class Library»Reference to

view the function reference. Expand

NI Measurement Studio Help»

NI Measurement Studio .NET

Class Library»Using the

Measurement Studio .NET Class

Libraries

Visual Studio .NET

Help—contains conceptual topics

for using NI-DAQmx with Visual

C# and Visual Basic .NET.

Help»Contents. Select

Measurement Studio from the

Filtered By drop-down list and

follow the location instructions for

the NI-DAQmx .NET Help.

*With the Microsoft .NET Framework version 1.1 or later, you can use NI-DAQmx to create applications using Visual C#

and Visual Basic .NET without Measurement Studio. You need Microsoft Visual Studio .NET 2003 or Microsoft Visual

Studio 2005 for the API documentation to be installed.

Table 1. NI Driver and Application Software Documentation (Continued)

Software Document/Description Location/Topic

NI WLS/ENET-9163 Carrier User Guide and Specifications 8 ni.com

Installing the Software

NI WLS/ENET-9000 Series device software support for Windows

Vista/XP/2000 is provided by NI-DAQmx.

The DAQ Getting Started Guide, which is accessible from Start»

Programs»National Instruments»NI-DAQ or at ni.com/manuals,

offers NI-DAQmx users step-by-step instructions for installing software

and hardware, configuring channels and tasks, and getting started

developing an application.

Installing Other Software

If you are using other software, refer to the installation instructions that

accompany your software.

Example Programs

The NI-DAQmx CD contains example programs that you can use to

get started programming with the NI WLS/ENET-9000 Series device.

Refer to the NI-DAQmx for WLS/ENET Devices Getting Started Guide that

shipped with your device, and is also accessible from Start»Programs»

National Instruments»NI-DAQ,for more information.

Using the NI WLS/ENET-9000 Series Device

Using the NI WLS/ENET-9000 Series Device on a Desktop

You can use the NI WLS/ENET-9000 Series device on a desktop. Figure 3

shows the stacking grooves for NI ENET-9000 Series devices, and where

to apply the rubber standoffs for the NI WLS/ENET-9000 devices. For

secure desktop use, you can adhere the supplied rubber standoffs to the

underside of the device.

Note NI ENET-9000 Series Only—the NI ENET-9000 Series device has underside

grooves that allow it to be stacked on top of other NI ENET-9000 Series devices.

Caution Do not stack an NI WLS-9000 Series device on top of an NI WLS-9000 Series

device.

Caution This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter.

©National Instruments Corporation 9 NI WLS/ENET-9163 Carrier User Guide and Specifications

Figure 3. Stacking Grooves and Rubber Standoffs for Desktop Use

Mounting the NI WLS/ENET-9000 Series Device

You can mount the NI WLS/ENET-9000 Series device using a 75 mm

DIN-Rail kit or a panel mount kit. For kit accessory ordering information,

refer to the accessory section of the NI WLS/ENET-9163 product page at

ni.com.

Caution Your installation must meet the following requirements:

• Allows 25.4 mm (1 in.) of clearance above and below the NI WLS/ENET-9000 Series

device for air circulation.

• Allows 50.8 mm (2 in.) of clearance in front of modules for common connector

cabling, such as the 10-terminal detachable screw terminal connector.

1Stacking Grooves

(NI ENET-9000 SeriesOnly)

2Rubber Standoffs

NI WLS/ENET-9163 Carrier User Guide and Specifications 10 ni.com

Attaching the NI 9910 DIN-Rail

The NI 9910 DIN-Rail kit contains one clip for mounting the device on a

standard 35 mm DIN-Rail. To mount the device on a DIN-Rail, fasten the

DIN-Rail clip to the device using a number 2 Phillips screwdriver and

four M4 ×17 screws. The screws are included in the DIN-Rail kit. Make

sure the DIN-Rail kit is installed as illustrated in Figure 4, with the larger

lip of the DIN-RAIL positioned up. When the DIN-Rail kit is properly

installed, the NI WLS/ENET-9000 Series device is centered on the

DIN-Rail.

Caution Remove the C Series I/O module before mounting the carrier to the DIN-Rail.

Figure 4. NI WLS/ENET-9000 Series Device DIN-Rail Installation

WLS LINK

ACTIVE

STATUS

POWE

NI WLS-9163

RESET

LINK/ACT

GND

PR0

PR1

10/100

802.11gC SeriesCarrier

INPUT 9-30V

10.5 W MAX

NI WLS-9163

RESET

LINK/ACT

GND

PR0

PR1

10/100

802.11gC SeriesCarrier

INPUT 9-30V

10.5 W MAX

WLS LINK

ACTIVE

STATUS

POWE

Inhaltsverzeichnis

Andere National Instruments Netzwerk-Hardware Handbücher

National Instruments

National Instruments AT-232/2 Bedienungsanleitung

National Instruments

National Instruments PXIe-5663E Bedienungsanleitung

National Instruments

National Instruments FIELDPOINT cFP-DO-403 Bedienungsanleitung

National Instruments

National Instruments NI 9375 Bedienungsanleitung

National Instruments

National Instruments NI Vision CVS-1450 Series Bedienungsanleitung

National Instruments

National Instruments VXI-1394 Bedienungsanleitung

National Instruments

National Instruments PXI Terminal Block NI TB-2708 Bedienungsanleitung

National Instruments

National Instruments IMAQ PCI-1411 Bedienungsanleitung

National Instruments

National Instruments FieldPoint cFP-RTD-122 Bedienungsanleitung

National Instruments

National Instruments NI 9203 Bedienungsanleitung

National Instruments

National Instruments NI WAP-3701 Bedienungsanleitung

National Instruments

National Instruments GPIB-100 Bedienungsanleitung

National Instruments

National Instruments WSN-3226 Bedienungsanleitung

National Instruments

National Instruments PXI Terminal Block NI TB-2709 Bedienungsanleitung

National Instruments

National Instruments NI ELVIS III Bedienungsanleitung

National Instruments

National Instruments NI 9149 Bedienungsanleitung

National Instruments

National Instruments SCB-68 Bedienungsanleitung

National Instruments

National Instruments SCXI-1120 Bedienungsanleitung

National Instruments

National Instruments DAQ 6527 Bedienungsanleitung

National Instruments

National Instruments PXI-1000 Bedienungsanleitung

National Instruments

National Instruments GPIB GPIB-ENET/100 Bedienungsanleitung

National Instruments

National Instruments NI 9147 Bedienungsanleitung

National Instruments

National Instruments GPIB-100A Bedienungsanleitung

National Instruments

National Instruments PXI PXITM -1000 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung