National Instruments NI TB-2630 Bedienungsanleitung

INSTALLATION INSTRUCTIONS

NI TB-2630

Terminal Block for the NI PXI-2530

This guide describes how to install and connect signals to the

National Instruments TB-2630 terminal block to configure your

NI PXI-2530 switch module as one of the following:

• 128 × 1 1-wire multiplexer

• 64 × 1 2-wire multiplexer

• 32 × 1 4-wire multiplexer

• Eight 16 × 1 1-wire multiplexers

Refer to the NI Switches Getting Started Guide to determine when to install

the terminal block.

Introduction

The TB-2630 terminal block installs in front of the PXI-2530 switch

module. The TB-2630 has ribbon cable headers to connect signals to the

switch. Screw terminals for the trigger input and trigger output signals also

are available.

Conventions

The following conventions are used in this guide:

»The »symbol leads you through nested menu items and dialog box options

to a final action. The sequence File»Page Setup»Options directs you to

pull down the File menu, select the Page Setup item, and select Options

from the last dialog box.

This icon denotes a note, which alerts you to important information.

Ρ΅νιϋΠȂ඾ུࢊβȜΐ܄ȃ

NI TB-2630 Installation Instructions 2 ni.com

This icon denotes a caution, which advises you of precautions to take to

avoid injury, data loss, or a system crash.

bold Bold text denotes items that you must select or click in the software, such

as menu items and dialog box options. Bold text also denotes parameter

names.

italic Italic text denotes variables, emphasis, a cross reference, or an introduction

to a key concept. This font also denotes text that is a placeholder for a word

or value that you must supply.

monospace Text in this font denotes text or characters that you should enter from the

keyboard, sections of code, programming examples, and syntax examples.

This font is also used for the proper names of disk drives, paths, directories,

programs, subprograms, subroutines, device names, functions, operations,

variables, filenames, and extensions.

1. Unpack the Terminal Block

To avoid damage when you handle the terminal block, take the following

precautions:

Caution Never touch the exposed pins of connectors.

• Ground yourself using a grounding strap or by touching a grounded

object.

• Touch the antistatic package to a metal part of the chassis before you

remove the terminal block from the package.

Remove the terminal block from the package and inspect the terminal block

for loose components or any sign of damage. Notify NI if the terminal

block appears damaged in any way. Do not install a damaged terminal

block on a switch terminal block.

Store the terminal block in the antistatic package when not in use.

©National Instruments Corporation 3 NI TB-2630 Installation Instructions

2. Verify the Components

Make sure you have the following:

❑NI TB-2630 terminal block

❑PXI chassis

❑NI PXI-2530 switch module

❑1/8 in. flathead screwdriver

❑Eight 2 × 9, 0.100 in. pitch ribbon cable connectors (included)

❑18-conductor, 28 AWG, 0.050 in. pitch ribbon cable (not included)

3. Connect Signals

To connect signals to the terminal block, complete the following steps:

1. Remove the terminal block top cover screws with the flathead

screwdriver.

2. Gently lift the terminal block top cover off the terminal block.

3. Loosen the two screws on the strain-relief assembly and remove

the top strain-relief bar.

4. Prepare your ribbon cable by installing the 2 × 9 ribbon cable

connectors onto separate 18-conductor ribbon cables.

5. Connect each ribbon cable to a header.

6. Replace the strain-relief bar and tighten the two screws on the

strain-relief assembly to secure the cables.

7. Replace the terminal block top cover.

8. Secure the terminal block top cover with the top cover screws.

NI TB-2630 Installation Instructions 4 ni.com

Figure 1. TB-2630 Terminal Block

1 Strain-Relief Opening

2 Strain-Relief Bar

3 Ribbon Cable

4 Strain-Relief Screw

5 Chassis Screws

6 Rear Connector

7 Terminal Block Top Cover

8 Top Cover Screws

9 Safety Ground Lug

10 Ribbon Cable Connector

11 Ribbon Cable Header

©National Instruments Corporation 5 NI TB-2630 Installation Instructions

Figure 2. TB-2630 Terminal Block Signal Connections

TRIGOUT

176 POSITION CONNECTOR

BANK 0

17 18

BANK 1

17 18

BANK 2

17 18

BANK 3

17 18

1WREF0 1WREF1

COM 0 COM 1 COM 2 COM 3

BANK 4

17 18

BANK 5

17 18

BANK 6

17 18

BANK 7

17 18

1WREF2 1WREF3

COM 4 COM 5 COM 6 COM 7

GND

TRIGIN

USE SHIELDED

CABLE ON TRIGGERS

GND

NI TB-2630 Installation Instructions 6 ni.com

Table 1. 128 x 1, 1-Wire Topology Terminal Mapping

Software

Name Hardware Name

Software

Name Hardware Name

Software

Name Hardware Name

com0 BANK 0, PIN 18 ch42 BANK 2, PIN 11 ch85 BANK 5, PIN 6

ch0 BANK 0, PIN 1 ch43 BANK 2, PIN 12 ch86 BANK 5, PIN 7

ch1 BANK 0, PIN 2 ch44 BANK 2, PIN 13 ch87 BANK 5, PIN 8

ch2 BANK 0, PIN 3 ch45 BANK 2, PIN 14 ch88 BANK 5, PIN 9

ch3 BANK 0, PIN 4 ch46 BANK 2, PIN 15 ch89 BANK 5, PIN 10

ch4 BANK 0, PIN 5 ch47 BANK 2, PIN 16 ch90 BANK 5, PIN 11

ch5 BANK 0, PIN 6 ch48 BANK 3, PIN 1 ch91 BANK 5, PIN 12

ch6 BANK 0, PIN 7 ch49 BANK 3, PIN 2 ch92 BANK 5, PIN 13

ch7 BANK 0, PIN 8 ch50 BANK 3, PIN 3 ch93 BANK 5, PIN 14

ch8 BANK 0, PIN 9 ch51 BANK 3, PIN 4 ch94 BANK 5, PIN 15

ch9 BANK 0, PIN 10 ch52 BANK 3, PIN 5 ch95 BANK 5, PIN 16

ch10 BANK 0, PIN 11 ch53 BANK 3, PIN 6 ch96 BANK 6, PIN 1

ch11 BANK 0, PIN 12 ch54 BANK 3, PIN 7 ch97 BANK 6, PIN 2

ch12 BANK 0, PIN 13 ch55 BANK 3, PIN 8 ch98 BANK 6, PIN 3

ch13 BANK 0, PIN 14 ch56 BANK 3, PIN 9 ch99 BANK 6, PIN 4

ch14 BANK 0, PIN 15 ch57 BANK 3, PIN 10 ch100 BANK 6, PIN 5

ch15 BANK 0, PIN 16 ch58 BANK 3, PIN 11 ch101 BANK 6, PIN 6

ch16 BANK 1, PIN 1 ch59 BANK 3, PIN 12 ch102 BANK 6, PIN 7

ch17 BANK 1, PIN 2 ch60 BANK 3, PIN 13 ch103 BANK 6, PIN 8

ch18 BANK 1, PIN 3 ch61 BANK 3, PIN 14 ch104 BANK 6, PIN 9

ch19 BANK 1, PIN 4 ch62 BANK 3, PIN 15 ch105 BANK 6, PIN 10

ch20 BANK 1, PIN 5 ch63 BANK 3, PIN 16 ch106 BANK 6, PIN 11

ch21 BANK 1, PIN 6 ch64 BANK 4, PIN 1 ch107 BANK 6, PIN 12

ch22 BANK 1, PIN 7 ch65 BANK 4, PIN 2 ch108 BANK 6, PIN 13

ch23 BANK 1, PIN 8 ch66 BANK 4, PIN 3 ch109 BANK 6, PIN 14

ch24 BANK 1, PIN 9 ch67 BANK 4, PIN 4 ch110 BANK 6, PIN 15

ch25 BANK 1, PIN 10 ch68 BANK 4, PIN 5 ch111 BANK 6, PIN 16

ch26 BANK 1, PIN 11 ch69 BANK 4, PIN 6 ch112 BANK 7, PIN 1

ch27 BANK 1, PIN 12 ch70 BANK 4, PIN 7 ch113 BANK 7, PIN 2

ch28 BANK 1, PIN 13 ch71 BANK 4, PIN 8 ch114 BANK 7, PIN 3

©National Instruments Corporation 7 NI TB-2630 Installation Instructions

Note In the 128 × 1, 1-wire topology, 1WREF0 (BANK 0–1, PIN 17) is connected to

COM1 (BANK 1, PIN 18).

ch29 BANK 1, PIN 14 ch72 BANK 4, PIN 9 ch115 BANK 7, PIN 4

ch30 BANK 1, PIN 15 ch73 BANK 4, PIN 10 ch116 BANK 7, PIN 5

ch31 BANK 1, PIN 16 ch74 BANK 4, PIN 11 ch117 BANK 7, PIN 6

ch32 BANK 2, PIN 1 ch75 BANK 4, PIN 12 ch118 BANK 7, PIN 7

ch33 BANK 2, PIN 2 ch76 BANK 4, PIN 13 ch119 BANK 7, PIN 8

ch34 BANK 2, PIN 3 ch77 BANK 4, PIN 14 ch120 BANK 7, PIN 9

ch35 BANK 2, PIN 4 ch78 BANK 4, PIN 15 ch121 BANK 7, PIN 10

ch36 BANK 2, PIN 5 ch79 BANK 4, PIN 16 ch122 BANK 7, PIN 11

ch37 BANK 2, PIN 6 ch80 BANK 5, PIN 1 ch123 BANK 7, PIN 12

ch38 BANK 2, PIN 7 ch81 BANK 5, PIN 2 ch124 BANK 7, PIN 13

ch39 BANK 2, PIN 8 ch82 BANK 5, PIN 3 ch125 BANK 7, PIN 14

ch40 BANK 2, PIN 9 ch83 BANK 5, PIN 4 ch126 BANK 7, PIN 15

ch41 BANK 2, PIN 10 ch84 BANK 5, PIN 5 ch127 BANK 7, PIN 16

Table 1. 128 x 1, 1-Wire Topology Terminal Mapping (Continued)

Software

Name Hardware Name

Software

Name Hardware Name

Software

Name Hardware Name

NI TB-2630 Installation Instructions 8 ni.com

Table 2. 64 x 1, 2-Wire Topology Terminal Mapping

Software

Name

Hardware Name Software

Name

Hardware Name

+ – + –

com0 BANK 0, PIN 18 BANK 1, PIN 18 ch32 BANK 4, PIN 1 BANK 5, PIN 1

ch0 BANK 0, PIN 1 BANK 1, PIN 1 ch33 BANK 4, PIN 2 BANK 5, PIN 2

ch1 BANK 0, PIN 2 BANK 1, PIN 2 ch34 BANK 4, PIN 3 BANK 5, PIN 3

ch2 BANK 0, PIN 3 BANK 1, PIN 3 ch35 BANK 4, PIN 4 BANK 5, PIN 4

ch3 BANK 0, PIN 4 BANK 1, PIN 4 ch36 BANK 4, PIN 5 BANK 5, PIN 5

ch4 BANK 0, PIN 5 BANK 1, PIN 5 ch37 BANK 4, PIN 6 BANK 5, PIN 6

ch5 BANK 0, PIN 6 BANK 1, PIN 6 ch38 BANK 4, PIN 7 BANK 5, PIN 7

ch6 BANK 0, PIN 7 BANK 1, PIN 7 ch39 BANK 4, PIN 8 BANK 5, PIN 8

ch7 BANK 0, PIN 8 BANK 1, PIN 8 ch40 BANK 4, PIN 9 BANK 5, PIN 9

ch8 BANK 0, PIN 9 BANK 1, PIN 9 ch41 BANK 4, PIN 10 BANK 5, PIN 10

ch9 BANK 0, PIN 10 BANK 1, PIN 10 ch42 BANK 4, PIN 11 BANK 5, PIN 11

ch10 BANK 0, PIN 11 BANK 1, PIN 11 ch43 BANK 4, PIN 12 BANK 5, PIN 12

ch11 BANK 0, PIN 12 BANK 1, PIN 12 ch44 BANK 4, PIN 13 BANK 5, PIN 13

ch12 BANK 0, PIN 13 BANK 1, PIN 13 ch45 BANK 4, PIN 14 BANK 5, PIN 14

ch13 BANK 0, PIN 14 BANK 1, PIN 14 ch46 BANK 4, PIN 15 BANK 5, PIN 15

ch14 BANK 0, PIN 15 BANK 1, PIN 15 ch47 BANK 4, PIN 16 BANK 5, PIN 16

ch15 BANK 0, PIN 16 BANK 1, PIN 16 ch48 BANK 6, PIN 1 BANK 7, PIN 1

ch16 BANK 2, PIN 1 BANK 3, PIN 1 ch49 BANK 6, PIN 2 BANK 7, PIN 2

ch17 BANK 2, PIN 2 BANK 3, PIN 2 ch50 BANK 6, PIN 3 BANK 7, PIN 3

ch18 BANK 2, PIN 3 BANK 3, PIN 3 ch51 BANK 6, PIN 4 BANK 7, PIN 4

ch19 BANK 2, PIN 4 BANK 3, PIN 4 ch52 BANK 6, PIN 5 BANK 7, PIN 5

ch20 BANK 2, PIN 5 BANK 3, PIN 5 ch53 BANK 6, PIN 6 BANK 7, PIN 6

ch21 BANK 2, PIN 6 BANK 3, PIN 6 ch54 BANK 6, PIN 7 BANK 7, PIN 7

ch22 BANK 2, PIN 7 BANK 3, PIN 7 ch55 BANK 6, PIN 8 BANK 7, PIN 8

ch23 BANK 2, PIN 8 BANK 3, PIN 8 ch56 BANK 6, PIN 9 BANK 7, PIN 9

ch24 BANK 2, PIN 9 BANK 3, PIN 9 ch57 BANK 6, PIN 10 BANK 7, PIN 10

ch25 BANK 2, PIN 10 BANK 3, PIN 10 ch58 BANK 6, PIN 11 BANK 7, PIN 11

ch26 BANK 2, PIN 11 BANK 3, PIN 11 ch59 BANK 6, PIN 12 BANK 7, PIN 12

ch27 BANK 2, PIN 12 BANK 3, PIN 12 ch60 BANK 6, PIN 13 BANK 7, PIN 13

ch28 BANK 2, PIN 13 BANK 3, PIN 13 ch61 BANK 6, PIN 14 BANK 7, PIN 14

©National Instruments Corporation 9 NI TB-2630 Installation Instructions

ch29 BANK 2, PIN 14 BANK 3, PIN 14 ch62 BANK 6, PIN 15 BANK 7, PIN 15

ch30 BANK 2, PIN 15 BANK 3, PIN 15 ch63 BANK 6, PIN 16 BANK 7, PIN 16

ch31 BANK 2, PIN 16 BANK 3, PIN 16

Table 3. 32 x 1, 4-Wire Topology Terminal Mapping

Software Name

Hardware Name

A+ A– B+ B–

com0 BANK 0, PIN 18 BANK 1, PIN 18 BANK 4, PIN 18 BANK 5, PIN 18

ch0 BANK 0, PIN 1 BANK 1, PIN 1 BANK 4, PIN 1 BANK 5, PIN 1

ch1 BANK 0, PIN 2 BANK 1, PIN 2 BANK 4, PIN 2 BANK 5, PIN 2

ch2 BANK 0, PIN 3 BANK 1, PIN 3 BANK 4, PIN 3 BANK 5, PIN 3

ch3 BANK 0, PIN 4 BANK 1, PIN 4 BANK 4, PIN 4 BANK 5, PIN 4

ch4 BANK 0, PIN 5 BANK 1, PIN 5 BANK 4, PIN 5 BANK 5, PIN 5

ch5 BANK 0, PIN 6 BANK 1, PIN 6 BANK 4, PIN 6 BANK 5, PIN 6

ch6 BANK 0, PIN 7 BANK 1, PIN 7 BANK 4, PIN 7 BANK 5, PIN 7

ch7 BANK 0, PIN 8 BANK 1, PIN 8 BANK 4, PIN 8 BANK 5, PIN 8

ch8 BANK 0, PIN 9 BANK 1, PIN 9 BANK 4, PIN 9 BANK 5, PIN 9

ch9 BANK 0, PIN 10 BANK 1, PIN 10 BANK 4, PIN 10 BANK 5, PIN 10

ch10 BANK 0, PIN 11 BANK 1, PIN 11 BANK 4, PIN 11 BANK 5, PIN 11

ch11 BANK 0, PIN 12 BANK 1, PIN 12 BANK 4, PIN 12 BANK 5, PIN 12

ch12 BANK 0, PIN 13 BANK 1, PIN 13 BANK 4, PIN 13 BANK 5, PIN 13

ch13 BANK 0, PIN 14 BANK 1, PIN 14 BANK 4, PIN 14 BANK 5, PIN 14

ch14 BANK 0, PIN 15 BANK 1, PIN 15 BANK 4, PIN 15 BANK 5, PIN 15

ch15 BANK 0, PIN 16 BANK 1, PIN 16 BANK 4, PIN 16 BANK 5, PIN 16

ch16 BANK 2, PIN 1 BANK 3, PIN 1 BANK 6, PIN 1 BANK 7, PIN 1

ch17 BANK 2, PIN 2 BANK 3, PIN 2 BANK 6, PIN 2 BANK 7, PIN 2

ch18 BANK 2, PIN 3 BANK 3, PIN 3 BANK 6, PIN 3 BANK 7, PIN 3

ch19 BANK 2, PIN 4 BANK 3, PIN 4 BANK 6, PIN 4 BANK 7, PIN 4

ch20 BANK 2, PIN 5 BANK 3, PIN 5 BANK 6, PIN 5 BANK 7, PIN 5

ch21 BANK 2, PIN 6 BANK 3, PIN 6 BANK 6, PIN 6 BANK 7, PIN 6

Table 2. 64 x 1, 2-Wire Topology Terminal Mapping (Continued)

Software

Name

Hardware Name Software

Name

Hardware Name

+ – + –

NI TB-2630 Installation Instructions 10 ni.com

4. Install the Terminal Block

To connect the TB-2630 terminal block to the PXI-2530 front panel,

complete the following steps.

Note The NI PXI-2530 should already be installed in a PXI chassis.

1. Plug the TB-2630 into the front connector of the PXI-2530.

2. Tighten the top and bottom chassis screws on the back of the terminal

block rear panel to hold it securely in place.

ch22 BANK 2, PIN 7 BANK 3, PIN 7 BANK 6, PIN 7 BANK 7, PIN 7

ch23 BANK 2, PIN 8 BANK 3, PIN 8 BANK 6, PIN 8 BANK 7, PIN 8

ch24 BANK 2, PIN 9 BANK 3, PIN 9 BANK 6, PIN 9 BANK 7, PIN 9

ch25 BANK 2, PIN 10 BANK 3, PIN 10 BANK 6, PIN 10 BANK 7, PIN 10

ch26 BANK 2, PIN 11 BANK 3, PIN 11 BANK 6, PIN 11 BANK 7, PIN 11

ch27 BANK 2, PIN 12 BANK 3, PIN 12 BANK 6, PIN 12 BANK 7, PIN 12

ch28 BANK 2, PIN 13 BANK 3, PIN 13 BANK 6, PIN 13 BANK 7, PIN 13

ch29 BANK 2, PIN 14 BANK 3, PIN 14 BANK 6, PIN 14 BANK 7, PIN 14

ch30 BANK 2, PIN 15 BANK 3, PIN 15 BANK 6, PIN 15 BANK 7, PIN 15

ch31 BANK 2, PIN 16 BANK 3, PIN 16 BANK 6, PIN 16 BANK 7, PIN 16

Table 3. 32 x 1, 4-Wire Topology Terminal Mapping (Continued)

Software Name

Hardware Name

A+ A– B+ B–

Inhaltsverzeichnis

Andere National Instruments Klemmenblock Handbücher

National Instruments

National Instruments TB-2666 Bedienungsanleitung

National Instruments

National Instruments PXI TB-2705 Bedienungsanleitung

National Instruments

National Instruments VXI-TB-196 Bedienungsanleitung

National Instruments

National Instruments SCXI-1338 Bedienungsanleitung

National Instruments

National Instruments NI 9935 Bedienungsanleitung

National Instruments

National Instruments TB-2627 Bedienungsanleitung

National Instruments

National Instruments TB-2630 Bedienungsanleitung

National Instruments

National Instruments NI TB-2642 Bedienungsanleitung

National Instruments

National Instruments PXIe-4310 Bedienungsanleitung

National Instruments

National Instruments SCXI-1166 Bedienungsanleitung

National Instruments

National Instruments PXIe-2527 Bedienungsanleitung

National Instruments

National Instruments TBX-1329 Bedienungsanleitung

National Instruments

National Instruments TBX-1316 Bedienungsanleitung

National Instruments

National Instruments SCXI-1314T Bedienungsanleitung

National Instruments

National Instruments SCXI-1324 Bedienungsanleitung

National Instruments

National Instruments BNC-2111 Bedienungsanleitung

National Instruments

National Instruments NI SCXI -1339 Bedienungsanleitung

National Instruments

National Instruments SCXI-1317 Bedienungsanleitung

National Instruments

National Instruments Terminal Block NI TB-2706 Bedienungsanleitung

National Instruments

National Instruments NI 9214 Bedienungsanleitung

National Instruments

National Instruments NI TB-2634 Bedienungsanleitung

National Instruments

National Instruments SCXI-1320 Bedienungsanleitung

National Instruments

National Instruments BNC-2120 Bedienungsanleitung

National Instruments

National Instruments TB-2641 Bedienungsanleitung

Beliebte Klemmenblock Handbücher anderer Marken

Russound

Russound EZB-1SC Bedienungsanleitung

Siemens

Siemens MOBY FC 56 Stücklistenhandbuch

Panasonic

Panasonic TY-FB8TA Bedienungsanleitung

NI SCXI-1379 Bedienungsanleitung

ABB

ABB ZLS924 Benutzerhandbuch

Festo

Festo CPVSC1-EPR Series Bedienungsanleitung

Festo

Festo CPV -GE-DN2-8 Stücklistenhandbuch

Stahl

Stahl 8146/2 Bedienungsanleitung

Crestron

Crestron CLT-1FAN4 Bedienungsanleitung

Sony

Sony CBX-H11 Bedienungsanleitung

Festo

Festo CPX-FB38 Stücklistenhandbuch

Festo

Festo CPV -GE-ASI-8E8A-Z Series Stücklistenhandbuch

Festo

Festo MPA-S Series Stücklistenhandbuch

Hubbell

Hubbell BASETRAK PB2 Series Bedienungsanleitung

Crestron

Crestron CLT-2DIM2 Bedienungsanleitung

Omron

Omron XW2B-40J6-2B Bedienungsanleitung

Festo

Festo CPV GE-IL Series Stücklistenhandbuch

Lenz

Lenz XpressNet Digital plus LA152 Betriebsanleitung