NCR K350 Bedienungsanleitung
NCR K350
RealScan Remote Imager
Configuration Guide
Issue A
Revision Record
Issue Date Remarks
A Aug 2013 First issue
1
Introduction
The NCR RealScan Remote Imager is a highly flexible and convenient alternative to a
handheld scanner.
The Imager module has a long cord which permits the store personnel to mount it in a
convenient place for the customer, without requiring precious space on the sales
counter. The Imager module is designed to be robust, making it more mobile and
enough to be handed to customers in case there is a need for it.
2
Installing the Imager Module
The RealScan Remote Image is easily connected to the existing USB ports of NCR 78xx
series scanners.
The USB Ports on each respective scanner are encircled in red below:
32441
7878 7874
7884 7812
3
Programming Instructions
Program the Host Scanner for the Remote Imager
The host scanner (7878, 7874, 7884, or 7812) must be programmed so that it can
perform the following:
•Permit 2D data to pass through the POS
•Enable the K350 mode
To program the host scanner, scan the following bar codes:
11818
IMPORTANT
The following programming instructions are
ONLY meant to enable the newly installed
RealScan remote imager module.
They are NOT intended to be a substitute for the
customer’s already-programmed parameters.
Do NOT scan the DEFAULT barcode at any
time when installing the Remote Imager Module
or the Customer’s original parameters will be
lost and their scanners will stop working.
4
R0042
Enable 2D Pass–Through Function for all 2D Types
Note: The passed–through PDF data is transmitted in ASCII when RS–232 Serial or
NCR USB is used. This data format is required by NCR OPOS for 2D bar codes.
R0055
5
R0063
R0057
6
Activate Beep Sounds on the 7878 Scanner
Note: This function is optional. The imager module produces beep sounds on its
own.
R0052
R0048
R0053
7
Enable the Imager Module on the 7884, 7874, and 7812
Caution: Do not perform this sequence on the 7878. If a K150 has already been
installed, performing this on a 7878 turns–off the embedded imager.
R0056
R0059
R0048
8
R0044
Inhaltsverzeichnis
Andere NCR Barcode-Lesegerät Handbücher
NCR
NCR 7409-K302 Handbuch
NCR
NCR RealScan 7872 Bedienungsanleitung
NCR
NCR RealScan 7802 Bedienungsanleitung
NCR
NCR 7409-K360 Handbuch
NCR
NCR RealPOS Bedienungsanleitung
NCR
NCR 7409 K303 Gebrauchs- und Pflegehandbuch
NCR
NCR Realscan 7837 Bedienungsanleitung
NCR
NCR 7409-K300 Handbuch
NCR
NCR 74 OFX (7874) Bedienungsanleitung
NCR
NCR 7409-K330 Handbuch
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
Meec tools
Meec tools OBD-II / VAG Bedienungsanleitung
