NEC NP05WK1 Leitfaden

Wall Mount Unit

NP05WK/NP05WK1

Installation and Adjustment Manual

NP05WK-IAM-01

ENG-1

Wall Mount Unit

NP05WK/NP05WK1 Installation and Adjustment Manual

Thank you for your purchase of this NEC wall mount unit.

Please read this installation and adjustment manual carefully to ensure proper use.

For a list of the supported projectors, please see the NEC website or NEC catalogs.

The projector illustrations in this installation and adjustment instruction manual are for il-

lustration purposes only and may differ in form from the projector to be installed.

Special skills are required to install the wall mount unit. This

work should never be performed by the customer.

To the Dealer and Installer

To ensure customer safety, we ask that the installation work

be started after careful attention is paid to the strength of the

mounting location to ensure it will withstand the weight of the

projector and mounting hardware.

CONTENTS

Please heed the following...................................................ENG-2

Introduction........................................................................ENG-4

Packaged Parts........................................................ENG-4

Names of Parts.........................................................ENG-5

Dimensions of Parts..................................................ENG-6

Installing the Projector ........................................................ENG-7

Adjusting for Distortion of the Projected Image................. ENG-12

Speciﬁcations................................................................... ENG-18

ENG-2

Please heed the following

 Symbol

In this “Installation and Adjustment Manual”, to ensure the safe and proper use of the product, pre-

vent harm to yourself and others and damage to property, various symbols are used. The symbols

and meanings are as follows. Please read this manual after ensuring the contents are well under-

stood.

Warning Improper handling and ignoring this indication may result in

bodily harm such as death, serious injury and so on.

Caution Improper handling and ignoring this indication may result in

bodily injury and damage to surrounding contents.

Examples of symbols:

Symbol alerts you to cautions (including warnings)

Concrete cautions are speciﬁed in ﬁgures.

Symbol expresses prohibited actions

Concrete prohibitions are speciﬁed in ﬁgures.

 Symbol expresses compulsory actions.

Concrete instructions are speciﬁed in ﬁgures.

Warning

• Wheninstallingtheprojectorandadjustingtheprojectionposition,besuretodoso

as explained in this manual. The projector may fall and cause injury if installed and

adjusted improperly.

• Topreventtheprojectorfromfalling,installitinalocationandfastenitsoastoensure

sufﬁcient strength to support the combined weight of the projector, the wall mount

unit and so on for an extended period as well as to withstand earthquakes. Insufﬁ-

cient strength or fastening may result in the projector falling and causing injury.

Be sure to observe the following precautions:

- Use M6 (1/4 inch) for the wall ﬁxation bolts and screws for the wall adapter.

- Use an outlet for the power source of the projector. Do not directly connect to the

lamp line because this is dangerous.Also, use an accessible outlet so that you can

connect and disconnect the power plug.

- Mounting on a wooden wall

Ensure the load is mounted on a pillar or robust constructional material. If the

strength of the constructional material and so on is insufﬁcient, please reinforce it.

Do not mount on wall ﬁnishing material, furring strip and so on.

- Mounting on a concrete wall

Use a commercial anchor bolt M6 (1/4 inch), anchor nuts and similar, which will bear

the load of the projector.

• Donotinstallinplacessubjecttoconstantvibration.Extendedvibrationmaycause

loosening of the screws and result in the Wall Mount Unit and projector falling and

causing injury. Also, it may cause breakdown of the projector.

ENG-3

Warning

• Toensuresafety,besuretotightenthebolts,screwsandsafetylockscrewssecure-

ly. Failure to do so may result in the projector falling and causing injury.

• Donotmodifyanyparts.DoingsomayresultintheprojectorandtheWallMountUnit

falling and causing injury.

• Donotusebrokenparts.DoingsomayresultintheprojectorandtheWallMountUnit

falling and causing injury. If a part should break, consult your dealer.

• Donotlookintotheprojectionwindow,mirrororlenswhentheprojectoristurned

on. Doing so could damage your eyesight.

• DonothangfromtheprojectorandtheWallMountUnit.Doingsomayresultinthe

projector and the Wall Mount Unit falling and causing injury. Be especially careful of

children.

• Donotuseadhesiveforthelockingscrews,lubricantagent,oilandsoonforthewall

adapter. Doing so may cause the material of the wall adapter to deteriorate and result

in the projector falling and causing injury.

• Neverhanganythingfromthearmofthewallmountingunit.

The arm may break and fall down and cause injuries.

• Makesureyouholdthebaseofthearmbeforeadjustingwhenyouareloweringthe

arm. The arm may break and fall down causing injuries if it is not held at the base dur-

ing adjustment.

Caution

• Donotobstructtheprojector’sventilationholes.Doingsowillpreventthedissipation

of heat and may result in ﬁre. In particular, do not use the projector in the following

ways:

installing the projector in a place such as wall and so on where ventilation is poor,

covering it, etc.

• Donotinstalltheprojectorinfrontoftheoutletsofanairconditionerorheaterorin

a place exposed to signiﬁcant vibrations. Doing so may result in ﬁres and electric

shock.

• Do not install the projector in humid or dusty places or those exposed to greasy

smoke or steam (such as near cooking equipment or humidiﬁers). Doing so may result

in ﬁres.

• Wheninstallingtheprojector,leavesufcientspacebetweenitandsurroundingob-

jects. Failure to do so will prevent the dissipation of heat and may result in ﬁres.

Please:

•

Please avoid rooms with a lot of cigarette smoke and lamp soot, as well as dust and moisture.

Dirt may get attached to optical parts such as the lens and result in a lowering of the image quality.

• Avoidplacesinwhichthescreenisexposedtodirectsunlightorilluminatedlight.

When surrounding light directly hits the screen, the image appears washed out and is difﬁcult

to view.

• Avoidlocationsexposedtoparticularlyhighorlowtemperatures.

 Doing so may result in breakdown. (For the ambient operating temperature, see the user’s

manual included with the projector.)

ENG-4

Introduction

MPackaged Parts

Check that the parts below are included in the package.

Wall adapter: 1 set

Slide arm: 1 set

The wall adapter and slide arm are assembled

upon shipment.

Wall adapter covers: 2

These are covers for the wall adapter. The two

covers are the same.

M4×8 mm screws: 4

These are used to mount the projector.

Wall plate: 1

This is used to mount the wall adapter in the

North American region.

* For the bolts or screws for mounting the wall

adapter to the wall, use bolts or screws that

are adapted to the wall surface.

M6×10 mm screws: 4

These are used to mount the wall plate to the

wall mount unit.

Horizontally-inclined securing screws

(A): 1 unit

Spring washer (B): 1 unit

Washer (C): 1 unit

To be used by those who wants to ﬁx the

horizontal inclination of the screen after

adjusting it. Please refer to the Install Guide

for the installation method.

Washers: 4

Spacers: 4

These are used to mount the wall adapter to

the wall.

* For the bolts or screws for mounting

the wall adapter to the wall, use bolts or

screws that are adapted to the wall sur-

face.

Height adjustment securing

screws (D) : 2 units

To be used by those who want to secure the

height of the arm after adjusting it. Please

refer to the back side of the Install Guide for

the installation method.

Hexagonal wrench: 1

This is a wrench for tightening

the safety lock screws.

Blind curtain: 1 piece

To be used by those

who want to conceal

the arm base. Please

refer to the back

page of the Quick

Install Guide for the

installation method.

Cautions on Installation: 1

These include safety precautions on install-

ing the wall mount unit, a list of the included

parts and the speciﬁcations.

Quick Install Guide: 1

This provides a simple description of the in-

stallation and adjustment procedures.

Install Guide: 1

The installation method

of the horizontally-in-

clined securing screws

and height adjustment

securing screws is pre-

sented here.

ENG-5

MNames of Parts

(Wall adapter)

Cable hole

Wall adapter cover

Elongated wall

mount screw holes

Height adjustment securing screw holes (refer to

attachment)

Horizontally-inclined securing

screw holes (refer to attachment)

(Arm unit)

Vertical position

reference line

Wall adapter (wall adapter unit + arm unit)

View from above Slide arm

Cap

Left/right tilt adjustment knob

Safety lock screws (2)

Cable hole

Fixing screws (2)

Horizontal title

adjustment knob

(Mount plate)

Vertical title ad-

justment knob

Cable hole

View from below

Elongated wall mount

screw holes

ENG-6

100

530

142

100

189

94.5

189

100

142

100

5°

223

Units: mm

MDimensions of Parts

Thefollowingshowsanexternalviewofthewallmountunit,thepositionsofthewalladapter’swall

mount screws and the amount of movement when mounting the projector.

Center of wall adapter

942 (min.) to 1542 (max.)

(When wall plate mounted: 945 (min.) to 1545 (max.)

Inclination of the arm

(design value)

600 (arm unit movement range)

Center of wall adapter

Wall adapter mount screw positions

±40 (arm unit movement range)

Wall adapter mount screw positions

Center of wall

adapter

±50 (wall adapter movement range)

ENG-7

Preparations:

1. Prepare a Phillips screwdriver (magnetic) and the included hexagonal wrench.

2. Removetheprojector’scablecover.Forinstructions,seetherespectiveoperatinginstructions.

1. Remove the slide arm.

The wall adapter and slide arm are assembled upon shipment.

(1) Remove the two fixing screws and the two safety lock screws.

(2) Pull off the slide arm.

Fixing screws

Safety lock screws

Slide arm

(1)

(2)

Before installing

Consider the place where the screen is to be installed and determine the position in

which the wall mount unit is to be mounted. (Refer to the Quick Install Guide)

- It is not possible to install in such a way that the image is projected at an angle. Position

in such a way that the image is projected directly to the front.

2. Check that the position of installation meets the conditions in “Be sure to

read before installing” on page ENG-2 of these instructions.

- Because the elevation angle of the projector’s optical axis is large, small shifts in the

projection distance will change the size and position of the projected image signiﬁcantly.

Also, if the direction in which the projector is facing is off, the distortion of the image in-

creases.

Installing the Projector

ENG-8

3. Attach the projector to the mount plate.

Line up the screw holes in the mount plate with the screw holes on the bottom of the projector and

securely tighten the four included M4×8 screws.

- Place a thick, soft cloth, etc., on the floor to protect the projector from scratches.

Note: “MAX.M4 x 8” is indicated on the four screw holes on the bottom of the projector. Note that

thisindicationisnotforthisproduct’sprojectoradapter.

- Mounting the projector using screws

other than the included ones could

damage the projector or result in it

falling and causing injury. Be sure to

use the included screws.

Mount plate

M4×8 screws

CAUTION

- Be careful not to touch the projector’s pro-

jection window when mounting the projector.

2. Attach the wall adapter to the wall’s structural material.

Use the included washers and spacers to attach the wall adapter with the M6 screws (or bolts).

- Please refer to the attachment “Quick Install Guide” and ENG-6 of the “Dimensions of Parts” for

the wall installation position and dimensions.

- Be sure to fasten the screws at the center of the mount holes, as they will serve as the refer-

ence points for the horizontal position.

- The wall adapter must be

installed in the proper up/

down direction. Mount it

in the direction shown on

the diagram.

- The horizontal position

adjustment range is ±50

mm.

CAUTION

- Mounting should be per-

formed by two people.

WARNING

- Be sure to use M6 (1/4 inch) screws or bolts (4 locations)

to fasten the bottom of the wall adapter. Using anything

other than M6 screws (or bolts) could result in the projec-

tor falling and causing injury.

142mm

189mm

Wall adapter

Mount holes Spacer

Washer

ENG-9

Arm unit

Slide arm

(1) Safety lock

screws

(2) Fixing screws

* This diagram is as seen from below.

4. Insert the slide arm on the arm unit.

5. Attach the safety lock screws and ﬁxing screws.

(1) Use the included hexagonal wrench to securely tighten the two safety lock screws.

(2) Leave the two fixing screws loose. Tighten them after adjustments are made.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere NEC Rack & Stand Handbücher

NEC

NEC PD04VW QR 46 55 Bedienungsanleitung

NEC

NEC NEC ST-EX2023 Bedienungsanleitung

NEC

NEC Video Wall Mount PDVWXUN 55 P Bedienungsanleitung

NEC

NEC Wall Mount PDW S 32-55 P (WMS 32-55 P Bedienungsanleitung

NEC

NEC NP40CM Leitfaden

NEC

NEC WM-46S-P Bedienungsanleitung

NEC

NEC MultiSync P701 Bedienungsanleitung

NEC

NEC easyHook NEC55 Bedienungsanleitung

NEC

NEC PA600CM Bedienungsanleitung

NEC

NEC Wall Mount WMS32-55 Bedienungsanleitung

NEC

NEC WM-46UN Wall Mount Portrait and Landscape Bedienungsanleitung

NEC

NEC NP02LK Bedienungsanleitung

NEC

NEC WMK-3255S Bedienungsanleitung

NEC

NEC NP04WK1 Leitfaden

NEC

NEC N8143-56F/56E Bedienungsanleitung

NEC

NEC WM-46UN-2X2 Bedienungsanleitung

NEC

NEC ST-EX2023 Bedienungsanleitung

NEC

NEC N8151-90 Benutzerhandbuch

NEC

NEC WM-55UN-L Bedienungsanleitung

NEC

NEC 42PD1 MULTI-SCREEN SUPPORT UNIT Bedienungsanleitung

NEC

NEC 92679B/W Bedienungsanleitung

NEC

NEC PlasmaSync PX-60XM5A Bedienungsanleitung

NEC

NEC NEC W32-70 Bedienungsanleitung

NEC

NEC N8140-820 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung