NEC N8551-28F Bedienungsanleitung

4-659-559-11(1)

N8551-28F/N8151-44F

Built-In AIT

Instruction Manual

Make sure you read this manual before using the product.

After reading this manual carefully, store it in a safe place.

Trademarks

Microsoft, the logo of Microsoft and Windows NT are registered trademarks of the Microsoft

Corporation in the United States and other countries.

Advanced Intelligent Tape is a trademark of the Sony Corporation.

The company and product names contained in this manual are trademarks or registered trademarks

of the respective companies.

Windows NT 4.0 is an abbreviation of Microsoft®Windows NT®Server network operating system

version 4.0 and Microsoft®Windows NT®Workstation network operating system version 4.0.

Windows 2000 is an abbreviation for Microsoft®Windows®2000 Professional, Microsoft®

Windows®2000 Server, and Microsoft®Windows®2000 Advanced Server.

All names used in the sample applications are fictitious. They have no relation with any product,

party or individual names.

Remarks

(1) Reproduction of this document or portions thereof without prior approval is prohibited.

(2) The information contained in this document is subject to change at any time, without prior

notice.

(3) Reprinting or changing of this document without prior approval of NEC is prohibited.

(4) All efforts have been made to ensure that the contents of this manual are correct; however,

should any doubts arise, or errors or missed entries be detected, NEC would greatly appreciate

it if our dealers are informed about it.

(5) Please note that in no event shall NEC be liable for any damages whatever arising out of the

use of this device, regardless of item (4) above.

iii

Keep this User’s Guide at hand for quick reference at anytime necessary.

Safety Consideration - Must Read -

Follow the instructions given in this User’s Guide for proper operations and safe use of the

device.

SAFETY INDICATIONS

This User’s Guide describes the device components with possible danger, hazards that

may be caused by ignoring warnings, and preventive actions against such hazards.

Components with possible danger are indicated with a warning label placed on or around

them. In the User’s Guide or warning labels, "WARNING" or "CAUTION" is used to

indicate a degree of danger.These terms are defined as follows:

Warning

Failure to heed this sign could result in serious

injury or death.

Caution

Failure to heed this sign could result in personal

in-jury or damage to properties.

Precautions and notices against hazards are presented with one of the follow-ing three

symbols.The individual symbols are defined as follows:

This symbol indicates the presence of a

hazard if the instruction is ignored. An

image in the symbol illustrates the

hazard type.

This symbol indicates prohibited

actions.An image in the symbol

illustrates a particular prohibited action.

This symbol indicates mandatory

actions.An image in the symbol

illustrates a mandatory action to avoid a

particular hazard.

Attention

Prohibited

Action

Mandatory

Action

(sample)

(Electric shock)

(sample)

(Do not

touch the part)

(sample)

(Disconnect the

power cord)

(Sample)

SYMBOLS USED INTHIS USER’S GUIDE AND WARNING LABELS

Attention

Prohibited Action

Mandatory Action

Warning

Do not install the device while the power is turned on.

Unplug the AC power cord from the main power source when

installing/ uninstalling the device to/from basic processing unit

or connect it with the enclosure.Failure to follow this warning

may cause an electric shock.

A symbol for

arousing attention

Indicates that improper use

may cause an electric shock. Indicates that improper use

may cause fumes or fire.

Indicates that improper use

may cause fingers to be caught. Indicates a general notice or

warning that cannot be

specifically identified.

Indicates a general prohibited

action or warning that cannot

be specifically identified.

Do not disassemble, repair, or

modify the device. Otherwise,

an electric shock or fire may be

caused.

Do not touch unspecified parts

or units.Otherwise, burns or an

electric shock may be caused.

Unplug the power cord.

Otherwise, an electric shock or

fire may be caused.

Indicates a general mandatory

action or warning that cannot

be specifically identified.

A content of

possible danger A term indicating a

hazard level

SAFETY NOTES

This section provides several precautions to enable you to use the product safely and

correctly and to prevent injury and property damage.Read this section carefully to ensure

proper and safe use of the product. For symbols, see "SAFETY INDICATIONS" provided

earlier.

General Attention

Warning

Do not use the Built-in AIT if any smoke, odor, or noise is

present.

If smoke, odor, or noise is present, immediately turn off the

POWER switch and disconnect the power plug from the outlet,

then contact your sales agent.Using the Built-in AIT in such

conditions may cause a fire.

Keep needles or metal objects away from the Built-in AIT.

Do not insert needles or metal objects into ventilation holes in

the Built-in AIT. Failure to follow this warning may cause an

electric shock.

Caution

Keep water or foreign matter away from the Built-in AIT.

Do not let any kind of liquid (water etc.) or foreign matter

(e.g.,pins or paper clips) enter the Built-in AIT.Failure to follow

this warning may cause an electric shock, a fire, or a failure of

the Built-in AIT.When such things accidentally enter the Built-in

AIT, immediately turn off the power and disconnect the power

plug from the outlet. Do not disassemble the Built-in AIT. Contact

your sales agent.

Attention to Power or Power Cord

Warning

Do not hold the DC cable with a wet hand.

Do not disconnect/connect the cable while your hands are wet.

Failure to follow this warning may cause an electric shock.

Caution

Do not install the device while the power is turned on.

Unplug the AC power cord from the main power source when

installing/ uninstalling the device to/from basic processing unit or

connect it with the enclosure.Failure to follow this warning may

cause an electric shock.

Insert the DC cable into the outlet as far as it goes.

Heat generation resulting from a halfway inserted DC cable

(imperfect contact) may cause a fire. Heat will also be generated

if condensation is formed on dusty blades of the halfway inserted

cable, increasing the possibility of a fire.

Do not connect the Built-in AIT by unspecified cabling.

Connecting or cabling with DC cable should be done in

accordance with the procedure specified in the User's Guide.

Unspecified connecting or cabling may cause an electric shock

or a fire.

Do not use any damaged power cord.

If the power cord is damaged, immediately replace it with a new

part of same type.Do not repair the damaged section for reuse.

Otherwise, the section repaired with vinyl tape or the like will be

overheated to cause an electric shock or a fire.

Use the authorized cable only.

Use only the specified cable when connecting the Built-in AIT

with a basic processing unit. Use of an unspecified cable or

connection by unspecified cabling may cause a fire.

vii

Attention to Installing, Moving, Storing, Connection

Caution

Do not close the ventilation hole.

Do not close the ventilation hole in the front side of the Built-in

AIT. Otherwise, Its internal temperature will rise to cause

malfunctions or a fire.

Do not connect/disconnect the interface cables before

unplugging the power plug.

Before connecting/disconnecting the interface cables, disconnect

the power plug of the main power unit from the outlet.If the

power is off but the power plug is still connected, you may get an

electric shock.

Do not use the unspecified interface cables.

Use only the cable authorized by NEC and locate the device and

connector before connection.Use of an unauthorized cable or

displaced connection may cause a short circuit, resulting in a

fire.

When handling or connecting the interface cables, keep the

notes as follows:

• Do not tread on cables.

• Do not load on the cable.

• Insert the cable connector as far as it goes.

• Do not use damaged cables.

• Do not use damaged connectors.

• Make sure that screwing or the like be done firmly.

viii

Attention to Handling or Maintenance

Warning

Do not disassemble, repair, or alter the Built-in AIT.

Never attempt to disassemble, repair, or alter the Built-in AIT on

any occasion other than described in this User's Guide.Failure

to follow this instruction may cause an electric shock or a fire as

well as malfunctions of the Built-in AIT.

Do not handle while the power plug is connected.

Before handling or cleaning the Built-in AIT, disconnect the

power plug of the main power unit from the outlet.If the power is

off but the power plug is still connected, you may get an electric

shock.

Caution

Insert the cables into the connectors as far as it goes.

Heat generation resulting from a halfway inserted cables or

Interface cables (imperfect contact) may cause a fire.Heat will

also be generated if condensation is formed on dusty blades of

the halfway inserted cable, increasing the possibility of a fire.

Attention to Operation

Warning

Do not insert your hands into the cartridge load

compartment.

Do not insert your hands into the cartridge load compartment.

Otherwise, the fingers will be caught/pinched by the Built-in AIT

to cause an injury.

Do not touch the Built-in AIT when it thunders.

If it starts thundering, do not touch any part of the Built-in AIT.

Failure to follow this warning may cause an electric shock or a

fire.

Keep away pets.

Keep away pets from the Built-in AIT. Insertion their hair or

excrements may cause a fire or an electric shock.

Do not use a cellular phone or a pager

Turn off the power of the cellular phone or a pager. Otherwise,

malfunction may be caused.

For Correct Operation

To operate the N8551-28F/N8151-44F Built-In AIT correctly, observe the following points. For

considerations on handling the AIT data cartridge, refer to the chapter “AIT Data Cartridge”.

•Set the N8551-28F/N8151-44F Built-In AIT’s SCSI ID so that it will not duplicate with SCSI

ID of other SCSI equipment.

→Otherwise, an operation error will occur.

•When N8551-28F/N8151-44F Built-In AIT is a termination of the SCSI connection, set the

terminal resistance to ON using its DIP switch.

→Otherwise, an operation error will occur.

•Do not turn off power of the basic processing unit when the BUSY LED on the front of the

Built-In AIT is ON or blinking.

→This may cause a machine failure or damage of backup data.

•Do not use a portable phone near the Built-In AIT.

→This may cause a machine failure.

•Do not store the Built-In AIT in a place exposed to direct sunlight.

→The Built-In AIT may not be able to operate correctly.

•Do not store the Built-In AIT in a place subject to corrosive gas, chemicals or splash of chemi-

cals.

→A Built-In AIT part may be deformed or damaged and may not be able to operate correctly.

•Do not store the Built-In AIT in a place subject to strong vibrations.

→This may cause a machine failure.

•Do not put a thing on the Built-In AIT when using or storing it.

→This may cause a machine failure.

•As the data cartridge set in the Built-In AIT, use our “AIT Data Cartridge (model: AIT2,

AIT1)”.

→If you use a data cartridge of other manufacturer, a read/write error may occur.

•When cleaning the Built-In AIT, use our “AIT Cleaning Cartridge”.

→If you use a cleaner of other manufacturer, a machine failure may occur.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NEC Lagerung Handbücher

NEC

NEC LL030F Bedienungsanleitung

NEC

NEC D2246 Betriebsanleitung

NEC

NEC Storage HS8 Bedienungsanleitung

NEC

NEC Built-In AIT Bedienungsanleitung

NEC

NEC Versa VXi OP-220-73005 Bedienungsanleitung

NEC

NEC T30A Bedienungsanleitung

NEC

NEC Versa LX Bedienungsanleitung

NEC

NEC NS170 Bedienungsanleitung

NEC

NEC VERSA S1300 Series Bedienungsanleitung

NEC

NEC N8102-686 Bedienungsanleitung

NEC

NEC D3-10i Bedienungsanleitung

NEC

NEC N8115-05 Bedienungsanleitung

NEC

NEC S2500 Bedienungsanleitung

NEC

NEC FZ110A - Zip 100MB - 100 MB ZIP Drive Bedienungsanleitung

NEC

NEC FD1165 Bedienungsanleitung

NEC

NEC N8102-693 Bedienungsanleitung

NEC

NEC LL009F Bedienungsanleitung

NEC

NEC FDI036A Technische Daten

NEC

NEC N8151-34B Bedienungsanleitung

NEC

NEC S4900 Installationsanleitung

NEC

NEC N8102-509F Bedienungsanleitung

NEC

NEC Versa Lite Bedienungsanleitung

NEC

NEC N8151-54 Bedienungsanleitung

NEC

NEC VERSA S1300 Series Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung