NEC DSX-160 Bedienungsanleitung

System Conﬁguration

DSX-80/160 Hardware Manual Components ◆19

Components

System Conﬁguration

DSX-80/160 System Load Factor

The combination of lines and extensions you can connect to your DSX system may be limited by the System

Load Factor. Use the DSX-80/160 System Load Factor Worksheet on the next page to verify your system’s

conﬁguration. When entering data on the worksheet, for each installed card make entries for each Load Type.

There are two Load Types to consider: 5 VDC and 40 VDC.

To check your system conﬁguration:

1. Indicate the quantity for each card installed in the Qty column.

- The number of keysets, single line sets, and DSS Consoles does not affect the load factor.

For each item and for each Load Type, multiply the

Qty

times the

Load

and enter the value in the

Total

column.

- For example, two 16ESIU Cards have a load of 16 for 5 VDC and 40 for 40 VDC.

3. Add up the entries in each Total column and enter the values in Item 1: Load Type Totals.

4. Review Item 2: Power Supply Capacity and determine the capacity of the power supplies installed in

your system.

5. Compare the capacities in Item 2to your entries in Item 1. Item 1must always be equal to or less than

the entry in Item 2.

Important

Do not operate your system if the total for either Load Type

exceeds the Power Supply Capacity of your installation.

System Conﬁguration

20 ◆Components DSX-80/160HardwareManual

DSX-80/160 System Load Factor Worksheet

Description Qty

Load Type

5 VDC 40 VDC

Load Total Load Total

CPU Card 1 12 12 0 0

16ESIU Card 8 20

8SLIU Card 5 8

16SLIU Card 10 16

8COIU Card 3 0

16COIU Card 6 0

T1/E1/PRI Card 8 0

Item 1: Load Type Totals

(Cannot exceed Item 2: Power Supply Capacity.)

Item 2: Power Supply Capacity

If you have one power supply installed, the capacity is:

If you have two power supplies installed, the capacity is:

If you have three power supplies installed, the capacity is:

5 VDC = 40

5 VDC = 80

5 VDC = 120

40 VDC = 48

40 VDC = 80

40 VDC = 120

Notes:

• DSX-80 can only have 1 power supply.

• DSX-160 can have up to 3 power supplies. You cannot have more than two 16ESIU Cards per power supply,

regardless of System Load Factor calculations.

• Exceeding the allowed Load Type Total (Item 1) will cause the system’s power supplies to automatically shut down

and/or cause erratic system operation.

• The total of all station, line, DSS Console, and voice mail ports cannot exceed 160.

Andere Handbücher für DSX-160

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NEC Telefonsystem Handbücher

NEC

NEC DSX PRODUCT DESCRIPTION Bedienungsanleitung

NEC

NEC Univerge SV8100 Bedienungsanleitung

NEC

NEC Dterm I Series Bedienungsanleitung

NEC

NEC ElectraElite IPK Bedienungsanleitung

NEC

NEC DSX-160 Bedienungsanleitung

NEC

NEC Univerge SV9100 Bedienungsanleitung

NEC

NEC Univerge SV8100 Gebrauchsanweisung

NEC

NEC Xen Topaz Bedienungsanleitung

NEC

NEC Univerge SV8100 Bedienungsanleitung

NEC

NEC DS1000 Betriebsanleitung

NEC

NEC ELECTRA ELITE IPK II Bedienungs- und Montageanleitung

NEC

NEC Xen Master Benutzerhandbuch

NEC

NEC ElectraElite IPK Bedienungsanleitung

NEC

NEC Univerge SV 9500 Bedienungsanleitung

NEC

NEC 1232 AK Series Bedienungsanleitung

NEC

NEC EliteMail LX Bedienungsanleitung

NEC

NEC XN120 Vision Bedienungsanleitung

NEC

NEC DSX-80 - Bedienungsanleitung

NEC

NEC Dterm I Series Bedienungsanleitung

NEC

NEC SL1100 Gebrauchsanweisung

NEC

NEC DSX Bedienungsanleitung

NEC

NEC SL 2100 Bedienungsanleitung

NEC

NEC Univerge SV9100 Bedienungsanleitung

NEC

NEC SL1100 Bedienungsanleitung

Beliebte Telefonsystem Handbücher anderer Marken

Teleco

Teleco Perfect Voice Tis 16 Bedienungsanleitung

AT&T

AT&T Network Adapter 25 Bedienungsanleitung

AVE

AVE AF902R-CE Bedienungsanleitung

Tynetec

Tynetec Advent xt Bedienungsanleitung

Ericsson

Ericsson DCT1800-S Bedienungsanleitung

Alcatel

Alcatel EASY REFLEXES 4200 Bedienungsanleitung

Panasonic

Panasonic KX-TDA50 Bedienungsanleitung

Bticino

Bticino PABX 28D Bedienungsanleitung

Sonifex

Sonifex Phone In 6 Bedienungsanleitung

TransTel Communications

TransTel Communications TD-824i Montageanleitung

Nortel

Nortel BCM50 Produkthandbuch

Panasonic

Panasonic KX-TS25B Bedienungsanleitung

ASCOM

ASCOM TD 92375GB Betriebsanleitung

Karel

Karel MS26S Produktinformationsblatt

EnGenius

EnGenius DuraFon PRO Bedienungsanleitung

Teledat

Teledat X130 DSL Bedienungsanleitung

SpectraLink

SpectraLink MOG400 Bedienungsanleitung

LG-Nortel

LG-Nortel 300 Series Bedienungs- und Sicherheitshinweise