Neopost IS-350 Bedienungsanleitung

IS-350

Self Installation Guide

CONTENTS

IS-350

Mailing System

LAN Cable or Modem and Phone Cord Operator Manual Postage Meter Tapes

Plain Feed Deck or

Feed Deck With Moistener

(varies with models)

PSD (Postage Meter) Ink Cartridge Power Cord

Optional

STEP 1 INSTALL THE FEED DECK

Plain Feed Deck Feed Deck With Moistener

(varies with models)

Place the Feed Deck to the left of the Mailing System.

Remove the three pieces of

shipping tape on each side

of the Mailing System. Lift up

and lockdown the slots of the

Mailing System base over the

tabs of the feed deck.

A B

CONTENTS

IS-350

Mailing System

LAN Cable or Modem and Phone Cord Operator Manual Postage Meter Tapes

Plain Feed Deck or

Feed Deck With Moistener

(varies with models)

PSD (Postage Meter) Ink Cartridge Power Cord

Optional

STEP 1 INSTALL THE FEED DECK

Plain Feed Deck Feed Deck With Moistener

(varies with models)

Place the Feed Deck to the left of the Mailing System.

Remove the three pieces of

shipping tape on each side

of the Mailing System. Lift up

and lockdown the slots of the

Mailing System base over the

tabs of the feed deck.

A B

STEP 2 INSTALL POSTAGE METER

Open the Mailing System Cover.

Open top cover by lifting at the open slot.

Remove the PSD (Postage Meter)

from the packaging.

Insert the Postage Meter into the

Mailing System.

1. Open the Postage Meter Cover on the

left side.

2. Slide the Postage Meter securely into

the slot, positioning the postage meter

so the contacts are facing the rear of

the system and the locator runner

(ridge) is towards the bottom.

3. Close the Postage Meter Cover.

A B C

INSTALL INK CARTRIDGE

Remove the Ink Cartridge from

the packaging.

Remove the lm strips from the bottom of

the Ink Cartridge. Insert the Ink Cartridge into the

Mailing System.

1. Slide the Ink Cartridge into the slot

located on the right, positioning the

cartridge with the contacts facing the

rear of the system.

2. With your thumb “click” the cartridge

towards the back of the system to the

locked position.

Close the Mailing System Cover.

STEP 3

A B C

STEP 2 INSTALL POSTAGE METER

Open the Mailing System Cover.

Open top cover by lifting at the open slot.

Remove the PSD (Postage Meter)

from the packaging.

Insert the Postage Meter into the

Mailing System.

1. Open the Postage Meter Cover on the

left side.

2. Slide the Postage Meter securely into

the slot, positioning the postage meter

so the contacts are facing the rear of

the system and the locator runner

(ridge) is towards the bottom.

3. Close the Postage Meter Cover.

A B C

INSTALL INK CARTRIDGE

Remove the Ink Cartridge from

the packaging.

Remove the lm strips from the bottom of

the Ink Cartridge. Insert the Ink Cartridge into the

Mailing System.

1. Slide the Ink Cartridge into the slot

located on the right, positioning the

cartridge with the contacts facing the

rear of the system.

2. With your thumb “click” the cartridge

towards the back of the system to the

locked position.

Close the Mailing System Cover.

STEP 3

A B C

STEP 4 CONFIGURATION AND ACTIVATION

Set-up the connection to the server, contact the server, and activate the Mailing System.

In order to load funds, download rates, and support your Mailing System, you must set-up a connection between the Mailing System and the server.

This can be done in two different ways:

1. LAN (Standard)

The mailing system communicates with the server over a high-speed internet connection or LAN (Local Area Network).

»This standard method allows for fast, seamless postage rate updates and funds download; and software updates to be performed remotely

and automatically.

»Utilizing LAN connectivity eliminates connection errors when connecting to the server.

»If you choose this method, proceed to Step 4A (pg 6) – Connecting The LAN Cable.

2. Modem (Optional)

If you do not have a high speed internet connection available, the Mailing System can communicate with the server using a dial-up modem

connected to an analog telephone line or fax line.

»This method can only be used for postage rate updates and funds download.

»If you choose this method, skip to Step 4B (pg 9) – Connecting The Modem.

Connect to internet / LAN jack

or router.

1. Select a location for the Mailing System

near an internet / LAN jack or router.

2. Plug one end of the LAN cable into the

Internet jack.

Connect the other end of the

LAN cable into the internet jack

or router on the left side of the

Mailing System.

Connect the power.

Using the Power Cord, plug the female

connector into the right bottom back

corner of the Mailing System. Take the

male end and plug it into the power outlet.

Note : if your system has a switch, switch

your Mailing System on.

CONNECTING THE LAN CABLE

STEP 4A

A B C

STEP 4 CONFIGURATION AND ACTIVATION

Set-up the connection to the server, contact the server, and activate the Mailing System.

In order to load funds, download rates, and support your Mailing System, you must set-up a connection between the Mailing System and the server.

This can be done in two different ways:

1. LAN (Standard)

The mailing system communicates with the server over a high-speed internet connection or LAN (Local Area Network).

»This standard method allows for fast, seamless postage rate updates and funds download; and software updates to be performed remotely

and automatically.

»Utilizing LAN connectivity eliminates connection errors when connecting to the server.

»If you choose this method, proceed to Step 4A (pg 6) – Connecting The LAN Cable.

2. Modem (Optional)

If you do not have a high speed internet connection available, the Mailing System can communicate with the server using a dial-up modem

connected to an analog telephone line or fax line.

»This method can only be used for postage rate updates and funds download.

»If you choose this method, skip to Step 4B (pg 9) – Connecting The Modem.

Connect to internet / LAN jack

or router.

1. Select a location for the Mailing System

near an internet / LAN jack or router.

2. Plug one end of the LAN cable into the

Internet jack.

Connect the other end of the

LAN cable into the internet jack

or router on the left side of the

Mailing System.

Connect the power.

Using the Power Cord, plug the female

connector into the right bottom back

corner of the Mailing System. Take the

male end and plug it into the power outlet.

Note : if your system has a switch, switch

your Mailing System on.

CONNECTING THE LAN CABLE

STEP 4A

A B C

1. Modem

2. LAN

Installation process

STEP 4A CONTINUED CONNECTING THE LAN CABLE

Back

Installation process

Welcome, please press

"Ok" to begin the

Installation Process

Installation process

Press Next to select your

Connection Type.

Press the “OK” button.

If the system is already plugged in, and

it is in sleep mode, press the

Sleep/Wake button.

Press the “Down Arrow” button

to select LAN. Press the “OK”

button.

Select “Next” by pressing the

“OK” button.

D E

CONNECTING THE LAN CABLE

STEP 4A CONTINUED

Installation process

Your LAN connection is

about to be checked.

Please plug in the cable.

Select “Next” by pressing the

“OK” button.

1. Modem

2. LAN

Installation process

STEP 4A CONTINUED CONNECTING THE LAN CABLE

Back

Installation process

Welcome, please press

"Ok" to begin the

Installation Process

Installation process

Press Next to select your

Connection Type.

Press the “OK” button.

If the system is already plugged in, and

it is in sleep mode, press the

Sleep/Wake button.

Press the “Down Arrow” button

to select LAN. Press the “OK”

button.

Select “Next” by pressing the

“OK” button.

D E

CONNECTING THE LAN CABLE

STEP 4A CONTINUED

Installation process

Your LAN connection is

about to be checked.

Please plug in the cable.

Select “Next” by pressing the

“OK” button.

STEP 4B

Select a location for the

Mailing System near an analog

telephone jack.

The following are usually analog phone

lines:

»Fax lines

»Lines used by modems or credit card

readers

»Most residential phone lines

Connect the modem.

1. Plug one end of the telephone cable into

the analog phone outlet.

2. Take the other end of the phone cord

and connect it to the USB modem.

3. Plug the USB modem into the USB port

located on the left side of the Mailing

System.

CONNECTING THE MODEM (OPTIONAL ACCESSORY REQUIRED)

Connect the power.

Using the Power Cord, plug the female

connector into the right bottom back

corner of the Mailing System. Take the

male end and plug it into the power outlet.

A B C

Installation process

Welcome, please press

“Ok” to begin the

Installation Process.

OkBack

Installation process

Press “Next” to select your

Connection Type.

Installation process

1. Modem

2. Lan

Press the “OK” button.

If the system is already plugged in, and it

is in sleep mode, press the

Sleep/Wake button.

Select “Next” by pressing the

“OK” button.

Select “Modem” by pressing the

“OK” button.

CONNECTING THE MODEM (OPTIONAL ACCESSORY REQUIRED)

STEP 4B CONTINUED

D E F

Andere Handbücher für IS-350

Inhaltsverzeichnis

Andere Neopost Digitales Mailsystem Handbücher

Neopost

Neopost IJ-50 Bedienungsanleitung

Neopost

Neopost IS-5000 Bedienungsanleitung

Neopost

Neopost IS-330 Bedienungsanleitung

Neopost

Neopost INSERTER IN-3 SI-92 Bedienungsanleitung

Neopost

Neopost IS-480 Bedienungsanleitung

Neopost

Neopost IJ-15K Bedienungsanleitung

Neopost

Neopost HD-CXENVL-FDR V2 Montageanleitung

Neopost

Neopost IS-330 Bedienungsanleitung

Neopost

Neopost IJ 110 Bedienungsanleitung

Neopost

Neopost IS-420 Bedienungsanleitung

Neopost

Neopost IS-280 iMeter Bedienungsanleitung

Neopost

Neopost IS-430 Bedienungsanleitung

Neopost

Neopost IJ 70 Bedienungsanleitung

Neopost

Neopost IS-5000 Bedienungsanleitung

Neopost

Neopost IM-75 Bedienungsanleitung

Neopost

Neopost IS-430 Bedienungsanleitung

Neopost

Neopost HJ510C Bedienungsanleitung

Neopost

Neopost IJ-15K Bedienungsanleitung

Neopost

Neopost IJ-15K Bedienungsanleitung

Neopost

Neopost IN-600 Series Bedienungsanleitung

Neopost

Neopost IS-460 Bedienungsanleitung

Neopost

Neopost IS-5000 Bedienungsanleitung

Neopost

Neopost IS-460 Bedienungsanleitung

Neopost

Neopost IJ 80 Bedienungsanleitung

Beliebte Digitales Mailsystem Handbücher anderer Marken

Costway

Costway NP10936CP Bedienungsanleitung

Salsbury Industries

Salsbury Industries 4855E Bedienungsanleitung

Pitney Bowes

Pitney Bowes E500 Bedienungsanleitung

quadient

quadient iX-3 Series Bedienungsanleitung

quadient

quadient IS-350 Bedienungsanleitung

Pitney Bowes

Pitney Bowes SendPro C Handbuch

Martin Yale

Martin Yale 2051 SmartFold Handbuch

quadient

quadient iA Series Bedienungsanleitung

quadient

quadient IN-360 Series Bedienungsanleitung

Pitney Bowes

Pitney Bowes SendPro C Bedienungsanleitung

Pitney Bowes

Pitney Bowes DM220i Series Handbuch

Vade Retro

Vade Retro mailcube Gebrauchs- und Pflegehandbuch

Hasler

Hasler WJ185 Bedienungsanleitung

quadient

quadient IN-600 Bedienungsanleitung

FP PostBase Vision Benutzerhandbuch

quadient

quadient IS-280 Bedienungsanleitung

FP Post Base Vision Bedienerhandbuch

Frama

Frama Matrix F4 Bedienungsanleitung