Neptune E4000 Handbuch

DELIVER

VOL REPORTS

QSG-303-3

Rev. B 1/05

Operators Guide for LPG, with security valve

(“NON-PRESET” BATCH mode).

Howtomakeadelivery

1. Insert ticket in the printer

2. From the “NEPTUNE” root menu, press either of the white buttons or on the

four button front control panel, until “ROUTE” is flashing. Then press the green

START/ENTER button.

3. Press or until “DELIVERY” is flashing, then press the START/ENTER button.

4. Press or until the product that you intend to deliver is displaying in the “SELECT

PRODUCT” menu, then press the START/ENTER button to confirm the correct product.

For a priced product the display will show the gross price, confirm this is the correct

price by pressing the START/ENTER button, or press STOP/CANCEL to return to the

“SELECT PRODUCT” menu.

5. The display will reset and after 10 seconds the register will open the security valve.

6. You can now open the manual valve to begin delivering product.

7. When the delivery is complete close the manual valve.

8. Press the STOP/CANCEL button to close the security valve.

Note: pressing the START/ENTER button again will re-open the security valve to

continue the delivery.

NEPTUNE

ROUTE SUPERVISOR W&M

GROSS PRICE $/VOL

/ GAL

SELECT PRODUCT

FUEL #1

NET/TOT $/VOL

NET 60 F 0.0 GAL

To print a delivery ticket for LPG, “NON-PRESET” BATCH mode

1. Insert the ticket in the printer.

2. When the delivery is completed press the red STOP/CANCEL button to close the

security valve (if you didn’t do it for the step 8).

3. Press the STOP/CANCEL button again to print the delivery ticket. If additional copies

of the delivery ticket are required press the START/ENTER button once for each copy

required (each copy will have “DUPLICATE” printed at the bottom).

4. After printing the ticket, press the STOP/CANCEL button to complete the delivery and

return to the “SELECT PRODUCT” menu. To return to the NEPTUNE root menu press

the STOP/CANCEL button 2 times.

Note: The delivery ticket will be printed automatically, three minutes after the delivery is

completed, without pressing any buttons if “MULTIPLE DELIVERIES” is disabled.

Toprintashiftreport

1. From the NEPTUNE root menu, press either or , on the four button front panel,

until “ROUTE” is flashing, then press the START/ENTER button.

2. Press or until “REPORTS” is flashing, then press the START/ENTER button.

3. Press or until “SHIFT” is flashing, then press the START/ENTER button.

4. Press the START/ENTER button when the display reads “PRINT-END-OF SHIFT

REPORT?”

5. The end of shift report will now print.

NEPTUNE

ROUTE SUPERVISOR W&M

DELIVERY VOL REPORTS

SHIFT CALIBRATION

PRINT END-OF-SHIFT

REPORT?

Andere Handbücher für E4000

Inhaltsverzeichnis

Andere Neptune Messgerät Handbücher

Neptune

Neptune E4000 Bedienungsanleitung

Neptune

Neptune R450 Bedienungsanleitung

Neptune

Neptune E4000 Handbuch

Neptune

Neptune E-CODER Bedienungsanleitung

Neptune

Neptune R450 Referenzhandbuch

Neptune

Neptune HP Turbine Produkthandbuch

Neptune

Neptune R900 Produkthandbuch

Neptune

Neptune Leak Spy Bedienungsanleitung

Neptune

Neptune L900 Produkthandbuch

Neptune

Neptune TRU/FLO Produkthandbuch

Neptune

Neptune MACH 10 Produkthandbuch

Neptune

Neptune R450 Bedienungsanleitung

Neptune

Neptune MACH 10 Produkthandbuch

Neptune

Neptune E-CODER Bedienungsanleitung

Neptune

Neptune E-CODER) R450i Produkthandbuch

Neptune

Neptune Advantage II Bedienungsanleitung

Neptune

Neptune HP PROTECTUS III Produkthandbuch

Neptune

Neptune HP PROTECTUS III Produkthandbuch

Neptune

Neptune E4000 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung