NetApp E Series Bedienungsanleitung

E5700

E-Series

NetApp

February 21, 2022

This PDF was generated from https://docs.netapp.com/us-en/e-series/maintenance-e5700/index.html on

February 21, 2022. Always check docs.netapp.com for the latest.

Table of Contents

E5700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

Maintain E5700 hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê13

Canisters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê30

Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê46

Host interface cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê78

Host port protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê113

E5700

Maintain E5700 hardware

For the E5700 storage system, you can perform maintenance procedures on the

following components.

Batteries

A battery is included with a controller canister and preserves cached data if the AC power fails.

Controllers

A controller consists of a board, firmware, and software. It controls the drives and implements the System

Manager functions.

Canisters

Canisters consist of three different types: power-fan canisters (power supplies) that supply a redundant power

source and adequate cooling in a 12-drive or 24-drive controller shelf or drive shelf; power canisters that are

used for power redundancy in a 60-drive controller shelf or drive shelf; and fan canisters that are used for

cooling the 60-drive controller shelf or drive shelf.

Drives

A drive is an electromagnetic mechanical device that provides the physical storage media for data.

Host interface cards (HICs)

A host interface card (HIC) can optionally be installed within a controller canister. The E5700 controller

includes built-in host ports on the controller card itself, as well as host ports on the optional HIC. Host ports that

are built into the controller are called baseboard host ports. Host ports that are built into the HIC are called HIC

ports.

Host port protocol

You can convert the protocol of a host to a different protocol so that compatibility and communication can be

established.

Batteries

Requirements for E5700 battery replacement

Before you replace an E5700 battery, review the requirements and considerations.

Each controller canister includes a battery that preserves cached data if the AC power fails.

Recovery Guru alerts

If the Recovery Guru in SANtricity System Manager reports one of following statuses, you must replace the

affected battery:

•Battery Failed

•Battery Replacement Required

From SANtricity System Manager, review the details in the Recovery Guru to confirm that there is an issue with

a battery and to ensure no other items must be addressed first.

Procedure overview

To protect your data, you must replace a failed battery as soon as possible.

The following is an overview of the steps to replace a battery in E5700 controllers (E5724, EF570, or E5760):

1. Take controller offline (duplex only).

2. Remove the controller canister.

3. Replace the battery.

4. Replace the controller canister.

5. Bring the controller online (duplex only).

Requirements

If you plan to replace a failed battery, you must have:

•A replacement battery.

•An ESD wristband, or you have taken other antistatic precautions.

•Labels to identify each cable that is connected to the controller canister.

•A management station with a browser that can access SANtricity System Manager for the controller. (To

open the System Manager interface, point the browser to the controller’s domain name or IP address.)

Optionally, you can use the command line interface (CLI) to perform some of the procedures. If you do not

have access to the CLI, you can do one of the following:

◦For SANtricity System Manager (version 11.60 and above) — Download the CLI package (zip file)

from System Manager. Go to Settings ›System ›Add-ons ›Command Line Interface. You can then

issue CLI commands from an operating system prompt, such as the DOS C: prompt.

◦For SANtricity Storage Manager/Enterprise Management Window (EMW) — Follow the instructions

in the express guide to download and install the software. You can run CLI commands from the EMW

by selecting Tools ›Execute Script.

Replace E5700 battery

You can replace a failed battery in an E5700 storage system.

About this task

Each E5700 controller canister includes a battery that preserves cached data if the AC power fails. If the

Recovery Guru in SANtricity System Manager reports either a Battery Failed status or a Battery Replacement

Required status, you must replace the affected battery.

Before you begin

•Verify that no volumes are in use or that you have a multipath driver installed on all hosts using these

volumes.

•Review Requirements for E5700 battery replacement.

What you’ll need

•A replacement battery.

•An ESD wristband, or you have taken other antistatic precautions.

•Labels to identify each cable that is connected to the controller canister.

•A management station with a browser that can access SANtricity System Manager for the controller. (To

open the System Manager interface, point the browser to the controller’s domain name or IP address.)

Step 1: Place controller offline (duplex)

If you have a duplex configuration, place the affected controller offline so you can safely remove the failed

battery. The controller that you are not placing offline must be online (in the optimal state).

Perform this task only if your storage array has two controllers (duplex configuration).

Steps

1. From SANtricity System Manager, review the details in the Recovery Guru to confirm that there is an issue

with a battery and to ensure no other items must be addressed first.

2. From the Details area of the Recovery Guru, determine which battery to replace.

3. Back up the storage array’s configuration database using SANtricity System Manager.

If a problem occurs when you remove a controller, you can use the saved file to restore your configuration.

The system will save the current state of the RAID configuration database, which includes all data for

volume groups and disk pools on the controller.

◦From SANtricity System Manager:

a. Select Support ›Support Center ›Diagnostics.

b. Select Collect Configuration Data.

c. Click Collect.

The file is saved in the Downloads folder for your browser with the name, configurationData-

<arrayName>-<dateTime>.7z.

◦Alternatively, you can back up the configuration database by using the following CLI command:

save storageArray dbmDatabase sourceLocation=onboard contentType=all

file="filename";

4. Collect support data for your storage array using SANtricity System Manager.

If a problem occurs when you remove a controller, you can use the saved file to troubleshoot the issue. The

system will save inventory, status, and performance data about your storage array in a single file.

a. Select Support ›Support Center ›Diagnostics.

b. Select Collect Support Data.

c. Click Collect.

The file is saved in the Downloads folder for your browser with the name, support-data.7z.

5. If the controller is not already offline, take it offline now using SANtricity System Manager.

◦From SANtricity System Manager:

a. Select Hardware.

b. If the graphic shows the drives, select Show back of shelf to show the controllers.

c. Select the controller that you want to place offline.

d. From the context menu, select Place offline, and confirm that you want to perform the operation.

If you are accessing SANtricity System Manager using the controller you are

attempting to take offline, a SANtricity System Manager Unavailable message is

displayed. Select Connect to an alternate network connection to automatically

access SANtricity System Manager using the other controller.

◦Alternatively, you can take the controllers offline by using the following CLI commands:

For controller A: set controller [a] availability=offline

For controller B: set controller [b] availability=offline

6. Wait for SANtricity System Manager to update the controller’s status to offline.

Do not begin any other operations until after the status has been updated.

Step 2: Remove controller canister

Before you can remove the failed battery, you must remove the controller canister.

Steps

1. Put on an ESD wristband or take other antistatic precautions.

2. Label each cable that is attached to the controller canister.

3. Disconnect all of the cables from the controller canister.

To prevent degraded performance, do not twist, fold, pinch, or step on the cables.

4. If the host ports on the controller canister use SFP+ transceivers, leave them installed.

5. Confirm that the Cache Active LED on the back of the controller is off.

6. Squeeze the latch on the cam handle until it releases, and then open the cam handle to the right to release

the controller canister from the shelf.

The following figure is an example of an E5724 controller shelf:

(1) Controller canister

(2) Cam handle

The following figure is an example of an E5760 controller shelf:

(1) Controller canister

(2) Cam handle

7. Using two hands and the cam handle, slide the controller canister out of the shelf.

Always use two hands to support the weight of a controller canister.

If you are removing the controller canister from an E5724 controller shelf, a flap swings into place to block

the empty bay, helping to maintain air flow and cooling.

8. Turn the controller canister over, so that the removable cover faces up.

9. Place the controller canister on a flat, static-free surface.

Step 3: Remove failed battery

After removing the controller canister from the controller shelf, remove the battery.

Steps

1. Remove the controller canister’s cover by pressing down on the button and sliding the cover off.

2. Confirm that the green LED inside the controller (between the battery and the DIMMs) is off.

If this green LED is on, the controller is still using battery power. You must wait for this LED to go off before

removing any components.

(1) Internal Cache Active LED

(2) Battery

3. Locate the blue release latch for the battery.

4. Unlatch the battery by pushing the release latch down and away from the controller canister.

(1) Battery release latch

(2) Battery

5. Lift up on the battery, and slide it out of the controller canister.

6. Follow the appropriate procedures for your location to recycle or dispose of the failed battery.

To comply with International Air Transport Association (IATA) regulations, never ship a

lithium battery by air unless it is installed within the controller shelf.

Step 4: Install new battery

After removing the failed battery, install a new one.

Steps

1. Unpack the new battery, and set it on a flat, static-free surface.

To comply with IATA safely regulations, replacement batteries are shipped with a state of

charge (SoC) of 30 percent or less. When you reapply power, keep in mind that write

caching will not resume until the replacement battery is fully charged and it has completed

its initial learn cycle.

Andere Handbücher für E Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NetApp Lagerung Handbücher

NetApp

NetApp FAS26 Series Handbuch

NetApp

NetApp AFF A400 Handbuch

NetApp

NetApp E-Series 3040 40U Bedienungsanleitung

NetApp

NetApp DE6900 Bedienungsanleitung

NetApp

NetApp E Series Bedienungsanleitung

NetApp

NetApp AltaVault System Handbuch

NetApp

NetApp StorageGRID Webscale SG6000 Series Betriebsanleitung

NetApp

NetApp DS4243 Montage- und Wartungsanleitung

NetApp

NetApp FAS25 Series Bedienungsanleitung

NetApp

NetApp AFF A900 Handbuch

NetApp

NetApp E Series Gebrauchsanweisung

NetApp

NetApp SG1000 Betriebsanleitung

NetApp

NetApp E Series Bedienungsanleitung

NetApp

NetApp E Series Bedienungsanleitung

NetApp

NetApp FAS22 Series Bedienungsanleitung

NetApp

NetApp DS224C Bedienungsanleitung

NetApp

NetApp FAS8300 Bedienungsanleitung

NetApp

NetApp FAS8700 Merkblatt

NetApp

NetApp StorageGRID Webscale 10.4 Produkthandbuch

NetApp

NetApp FAS500f Bedienungsanleitung

NetApp

NetApp DE6600 Bedienungsanleitung

NetApp

NetApp FAS8200 Series Bedienungsanleitung

NetApp

NetApp DiskShelf14mk4 FC Bedienungsanleitung

NetApp

NetApp StorageGRID SD100 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung