NetApp FAS26 Series Handbuch

Prepare for installation Install hardware Cable storage Complete system setup

and conﬁguration

1 2 3 4

FAS26xx Series Systems

Installation and Setup Instructions

Screwdriver Client

With a USB/serial connection and access to a

Web browser to conﬁgure your storage system

Rack space

2U per chassis

You provide

In the box Cluster Interconnect cables

Part number X6566B-05-R6 (112-00297)

or X6566B-2-R6 (112-00299)

10 GbE network cables

(order dependent)

Part number X6566B-2-R6 (112-00299)

or X6566B-3-R6 (112-00300) or X6566B-5-R6 (112-00301)

Optical network cables (order dependent)

Part number X6553-R6 (112-00188) or X6554-R6 (112-00189) or X6536-R6 (112-00090)

Data and cluster Interconnect cables

1. Go to mysupport.netapp.com and create an account, register your system, and get your license keys. 

2. Unpack all boxes and inventory contents.

3. Go to the AFF and FAS System Documentation Center and click FAS26xx series, and then Installation and Setup:

- Download and complete the Cluster Conﬁguration Worksheet.

-Watch the videos listed under Setup videos.

Pre-setup

Storage cables

mini-SAS HD to mini-SAS HD cables

Part number X66030A (112-00435) or X66031A (112-00436)

or X66032A (112-00437) or X66033A (112-00438)

Additional cables

Power cables

Ethernet cables micro USB console cable

Additional network cables

For connecting your storage system to your

network switch and Microsoft®Windows®client

Prepare for installation |1

215-15014_A0

Power cables

•Rack the system.

Rail kit: follow instructions in rail kit.

System cabinet: install in system cabinet.

•Place the bezel over the front of the system.

Install system

Cable controller for switchless ONTAP (option A)

or for switched ONTAP (option B)

See your network administrator for help connecting to your switch.

Connect both power cords

Both power cords MUST be used for all units.

Attach cable management arms.

Connect port e0c/0c to the data switch.

NOTE: Port e0c is required;

other ports are available if needed.

Connect the wrench port

to the management or subnet switch.

For option A only

Connect port e0a to port e0a

and port e0b to port e0b.

For option B only

Connect port e0a and port e0b

to the cluster switch.

Strap the cables to the

cable management arms.

Install hardware |Stage 2

Use retaining clipsUse retaining clips

LIFTING HAZARD

CAUTION

26 kg (55 lbs.)

Ethernet cables

10 GbE network cables

(PN 112-00299 or 112-00300 or 112-00301)

10 GbE network cables

(PN 112-00299 or 112-00300 or 112-00301) Switched ONTAP

AC AC

4To cluster switch

2To data network switch

To management

network switch

DO NOT power on system at this point.

Switchless ONTAP

AC AC

2To data network switch

To management

network switch

STOP HERE. If you have NO external storage, skip to section 4, complete system setup and conﬁguration.

IOM12 21

LN K LN K

IOM12 21

LN K LN K

IOM12 21

LN K LN K

IOM12 21

LN K LN K

IOM12 21

LN K LN K

IOM12 21

LN K LN K

AC AC

Dual controller system

IOM12 21

LN K LN K

IOM12 21

LN K LN K

LN K L N K

IOM12 21

LN K LN K

IOM12 21

LN K LN K

LN K L N K

IOM12 21

LN K LN K

IOM12 21

LN K LN K

LN K L N K

AC AC

Single controller system

Cabling a FAS26xx series with NO external storage

Cabling a FAS26xx series WITH external storage

(DS212C or DS224C disk shelves)

Cable storage |Stage 3 (Choose option A or B below)

First

shelf

IOMA IOMA

Last

shelf

First

shelf

Last

shelf

IOMBIOMB

AC AC

No additional cabling required for a single controller.

Single controller system

AC AC

Dual controller system

Connect the SAS ports of both controllers:

• Controller 1 0a to Controller 2 0b

• Controller 1 0b to Controller 2 0a

Storage cables

Connect the shelf-to-shelf ports through each domain (IOM A and IOM B)

Connect each node to IOM A in the stack

Connect each node to IOM B in the stack

Storage cables

AC AC

Set the console port on the laptop to 115,200 baud

with N-8-1, connect to the micro-USB port on the

controller with the console cable.

Connect the laptop to the Management

switch and give the laptop a TCP/IP

address on the management switch

Assign an initial node management IP address to one

of the nodes. If you have DHCP conﬁgured on your management network, record the IP address assigned

to the new controllers. Otherwise use Cluster Setup wizard to assign the node management IP address.

a. Open a console session using PuTTY, a terminal server, or the equivalent for your environment.

b. Enter the management IP address when prompted by the script.

Open a browser and enter management IP address. (https://xxx.xxx.xxx.xxx)

2Complete initial cluster setup:

1. Make sure that your laptop has network discovery enabled. See your laptop’s help for more information.

2. Connect your laptop to the Management switch.

3. Go to network devices and double-click either ONTAP icon.

Note: Accept any certiﬁcates displayed on your screen.

If your laptop has network discovery enabled:

OPTION

If your laptop does not have network discovery enabled:

OPTION

Ensure the controller modules are completely cabled and then turn the power supplies.

Management subnet

Laptop

3Use System Manager Guided Setup to conﬁgure your cluster

4Completing setup

1. Verify the health of your system by running Conﬁg Advisor.

2. After you have completed the initial conﬁguration, go to the NetApp ONTAP Resources page for information

about conﬁguring additional features in ONTAP.

micro USB console cable

Ethernet cable

If your system has one or more external drive shelves,

set the shelf IDs:

1. Power on the drive shelf, and then remove the end cap on the left of the shelf.

2. Press and hold the orange button until the ﬁrst digit blinks, and then press the button to advance

the ﬁrst digit (0-9) to the desired number. The ﬁrst digit continues to blink.

3. Press and hold the button until the second digit blinks, and then press the button to advance

the second digit (0-9) to the desired number. The ﬁrst digit stops blinking, and the second digit continues to blink.

4. Press and hold the button until the second digit stops blinking, and then replace the end cap on the shelf.

5. Wait about 10 seconds for both digits to start blinking again and for the LED to illuminate,

and then power-cycle the drive shelf to make the shelf ID take eect.

6. Repeat these steps for any remaining drive shelves.

Complete system setup and conﬁguration |Stage 4

FAS26xx series system

Management subnet 2

AC AC

Laptop

Dieses Handbuch passt für folgende Modelle

Andere NetApp Lagerung Handbücher

NetApp

NetApp E Series Bedienungsanleitung

NetApp

NetApp E Series Bedienungsanleitung

NetApp

NetApp AFF A400 Handbuch

NetApp

NetApp E Series Bedienungsanleitung

NetApp

NetApp FAS2800 Handbuch

NetApp

NetApp FAS2500 Gebrauchs- und Pflegehandbuch

NetApp

NetApp FAS8300 Bedienungsanleitung

NetApp

NetApp DiskShelf14mk4 FC Bedienungsanleitung

NetApp

NetApp EF550 Bedienungsanleitung

NetApp

NetApp H410S Handbuch

NetApp

NetApp H410S Betriebsanleitung

NetApp

NetApp E Series Bedienungsanleitung

NetApp

NetApp DS460C Bedienungsanleitung

NetApp

NetApp FAS8200 Series Bedienungsanleitung

NetApp

NetApp NearStore R100 Bedienungsanleitung

NetApp

NetApp AFF A400 Bedienungsanleitung

NetApp

NetApp SteelStore 30 Series Bedienungsanleitung

NetApp

NetApp StorageGRID Webscale SG5700 Series Betriebsanleitung

NetApp

NetApp FAS2700 Series Handbuch

NetApp

NetApp E Series Gebrauchsanweisung

NetApp

NetApp StorageGRID Webscale SG6000 Series Bedienungsanleitung

NetApp

NetApp FAS9500 Handbuch

NetApp

NetApp StorageGRID SD100 Bedienungsanleitung

NetApp

NetApp FAS2700 Series Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung