NetComm Wireless NTC-140 Bedienungsanleitung

Quick Start Guide

4G M2M Router

NTC-140

| Industrial IoT

Quick start guide

This quick start guide is designed to get you up and running quickly with your new

NTC-140 router. More advanced set up instructions are provided in the user guide

which can be opened by clicking on the Help tab on the web user interface, or

can be downloaded from

https://www.netcommwireless.com/product/4g-m2m-router

Package contents

All NTC-140 packages include:

1 x NetComm NTC-140 router

2 x 3G/4G antennas

1 x 1.5m Black Ethernet cable

1 x DIN rail mounting bracket

1 x Quick start guide

1 x Power supply cable with tted Molex connector

| Industrial IoT

NTC-140 - 4G M2M Router

I/O

GPS

USB LAN LAN/WAN

Cellular Main

SIM

µSD

Cellular AUX

Device overview

ITEM DESCRIPTION

13G/4G antenna connectors SMA female connector for 3G/4G antennas.

2GPS antenna connector SMA female connector for GPS antenna.

3SIM card slot Insert SIM card here.

4MicroSD card slot Insert a MicroSD card here to provide additional storage

(Optional).

NTC-140-01

I/O

USB LAN LAN/WAN

Cellular Main

SIM

µSD Cellular AUX

NTC-140-02

| Industrial IoT

ITEM DESCRIPTION

1Mini USB 2.0

OTG port

Provides connectivity for optional external storage or a USB Ethernet

dongle. Supplies up to 0.5A to connected device.

2Reset button Press and hold for less than 5 seconds to reboot to normal mode.

The LEDs are green and extinguish in sequence to indicate that the

router will reboot normally if the button is released during this period.

Press and hold for 5 to 15 seconds to reboot to recovery mode.

The LEDs are amber and extinguish in sequence to indicate that the

router will reboot to recovery mode if the button is released during

this period.

Press and hold for 15 to 20 seconds to reset the router to factory

default settings. The LEDs are red and extinguish in sequence to

indicate that the router will reset to factory default settings if the

button is released during this period.

3Molex Mini-Fit™

receptacle

Connect the provided power supply here. The Molex receptacle

provides:

• Ground (−)

• Power (+)

• I/O terminal

• (i) ignition input detection terminal.

4LAN port LAN port for wired Ethernet clients.

5LAN/WAN port LAN or WAN port for wired Ethernet clients or to bridge another

network connection.

I/O

GPS

USB LAN LAN/WAN

Cellular Main

SIM

µSD

Cellular AUX

NTC-140-01 / NTC-140-02

| Industrial IoT

NTC-140 - 4G M2M Router

Overview of LED indicators

LED

ICON

NAME

COLOR

STATE DESCRIPTION

Power Off Power off

Double ash Powering up

On Power on

On Power on in recovery mode

Slow ashing Hardware error, such as SIM not inserted.

GPS1/

Customisable

LED

Off GPS function disabled

Slow ashing GPS function is enabled but no satellite

detected

On Satellite detected, location acquired

Network Off Radio Off

On Connected via WWAN

Blinking2Trafc via WWAN

Slow ashing Connecting PDP

On Registered on Network

Slow ashing Registering network

Slow ashing SIM PIN locked

Fast ashing SIM PUK locked

On Can’t connect

Signal

strength

On LTE signal

On WCDMA signal

On GSM signal

1 GPS is only available on the NTC-140-02

2 The term “blinking” means that the LED may pulse, with the intervals that the LED is on and off not being equal. The

term “ashing” means that the LED turns on and off at equal intervals.

| Industrial IoT

Power supply cable

The included power supply cable has colour-coded breakout wires which can be

terminated to provide power, ignition detection and input/output functionality.

The picture below outlines the polarity and functions of the wires.

Power

(+) Ground

(−)

I/O

Ignition

| Industrial IoT

NTC-140 - 4G M2M Router

I/O

GPS

USB LAN LAN/WAN

Cellular Main

SIM

µSD

Cellular AUX

Installing your device

Step 1: Insert the SIM card

Using a paper clip, press the SIM Eject button to eject the SIM card tray. Place the

SIM card in the tray and then insert the loaded tray into the SIM slot with the gold

side facing up, as shown below.

Insert

SIM

Card

Press the SIM

Eject Button

| Industrial IoT

I/O

GPS

USB LAN LAN/WAN

Cellular Main

SIM

µSD

Cellular AUX

Step 2: Attach the antennas

The NTC-140 router is shipped with caps on the LTE and GPS* antenna sockets.

To attach the supplied antennas, rst remove the antenna socket caps from the

Main and Auxiliary antenna sockets by turning them in an anti-clockwise direction,

then screw the antennas onto the sockets by turning them in a clockwise direction.

Please refer to the Device overview section for the antenna socket layout. If you

have purchased a GPS antenna, remove the socket cap from the GPS antenna

socket and attach the antenna to the socket in the same manner.

Remove caps

then screw

antennas on

*GPS is only available on the NTC-140-02

| Industrial IoT

NTC-140 - 4G M2M Router

Step 3: Connect the power and Ethernet cables

Connect the included power supply cable to the Molex Mini-Fit™ receptacle

and then connect the green and white breakout wires to the ignition and I/O

connections as required. Connect the Power (red) and the Ground (black) wires to

your power source. The power LED on the router lights up when a power source

is connected.

Attach the supplied Black Ethernet cable to the LAN Ethernet port on your router

and the other end to your computer.

I/O

GPS

USB LAN LAN/WAN

Cellular Main

SIM

µSD

Cellular AUX

I/O

GPS

USB LAN LAN/WAN

Cellular Main

SIM

µSD

Cellular AUX

Connect

Ethernet

Cable

Ground

Power

Molex Mini-Fit™

I/O

Ignition

| Industrial IoT

Step 4: Access the router’s web interface

In your web browser’s address bar enter http://192.168.1.1/ or http://my.router/.

The login page is displayed.

There are two system management accounts (Root Manager and Admin) with

different management capabilities.

Root Manager account

Grants full privileges such as rmware upgrades, device conguration, backup

and restore, and reset to factory default settings. To access the Root Manager

account, use these login details.

http://192.168.1.1 or http://my.router

Username root

Password admin

Admin account

Allows updates to general settings. To access the Admin account, use these

http://192.168.1.1 or http://my.router

Username admin

Password admin

Enter the username and password for the admin or root manager account and

click Log in. The Status page is displayed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NetComm Wireless Netzwerk-Router Handbücher

NetComm Wireless

NetComm Wireless NTC-400 Series Bedienungsanleitung

NetComm Wireless

NetComm Wireless NWL-12 Series Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF18ACV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NB304n Bedienungsanleitung

NetComm Wireless

NetComm Wireless NP124 Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-140W Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-220 Series Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF10WV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NB304n Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-6200 Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-400 Series Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF10W Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-6908 Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-6200-01 Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-225 Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-221 Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-6908 Montageanleitung

NetComm Wireless

NetComm Wireless NB16DG Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF10WV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-140-01 Bedienungsanleitung

NetComm Wireless

NetComm Wireless NWL-25 Kurzanleitung

NetComm Wireless

NetComm Wireless WSG-NF5 Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF10WV Bedienungsanleitung

NetComm Wireless

NetComm Wireless Vodafone MachineLink 3G Kurzanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise