NetComm NB6Plus4 Bedienungsanleitung

NB6Plus4 - 1

This User Guide provides basic instructions for connecting your NB6Plus4 to an Apple

Macintosh computer and to the Internet.

1. Ethernet Installation

2. Modem Set-up Before you can use this Quick Start Guide, you must have already

established an ADSL service with your Internet Service Provider (ISP).

These instructions provide a basic set-up conﬁguration that should get home or small ofﬁce

Macs up and running. This will be sufﬁcient for most users. If you need to perform more

advanced conﬁgurations, please see the comprehensive User Guide on the supplied CD-

ROM for additional instructions.

NOTE: NetComm Technical Support for this product only covers the essential installation and features outlined in this Quick Start

Guide. For detailed information regarding the advanced features of this product, please see the conﬁguring sections in the

NB6Plus4 User Guide on the supplied CD-ROM.

Connecting your NB6Plus4

The NetComm NB6Plus4 Modem can be connected directly to your Mac via an Ethernet

interface. In addition, you can use your Mac’s Airport to connect to the NB6Plus4 wirelessly.

Warning: Before you begin, turn the power off for all devices. These include your Mac and your NB6Plus4 Modem.

Start Here

ADSL2+ Router

Mac User Guide

ADSL2+ Router

Mac User Guide

2 - NB6Plus4

Step 1 – Install the Hardware

To connect your modem using the Ethernet cable, follow these step-by-step instructions:

1. Connect the ADSL cable.

Connect one end of the telephone cable provided to the port labeled ADSL on the rear

panel of your NB6Plus4 Modem. Connect the other end to your wall phone jack.

2. Connect the Ethernet cable.

Connect one end of the Ethernet cable provided to the Ethernet port on your Mac and the

other end of the cable to the Ethernet port of your NB6Plus4 ADSL Modem.

3. Attach the power connector.

Connect the AC power adapter to the Power connector on the back of the NB6Plus4 and

plug in the adapter into a wall outlet or power strip.

4. Switch on the power. Your NB6Plus4 will start up. Turn on your Mac.

Hardware

Installation

ADSL2+ Router

Mac User Guide

NB6Plus4 - 3

Step 2 – Set up your Mac

This is how to conﬁgure your Mac to work with your NB6Plus4 ADSL Modem. Mac OS

10.2.2

1. From the Apple menu, select System Preferences.

2. The Systems Preferences window opens.

Mac

Set-up

ADSL2+ Router

Mac User Guide

4 - NB6Plus4

3. In the Systems Preferences window, locate the “Internet and Network” heading and

click once on the Network icon. The Network window opens.

4. If you want to use this Mac in more than place (perhaps at home as well as at your

workplace) or on more than one network, you can achieve this easily by setting up

a Location for each place or network. Swapping Locations then becomes a simple

matter of selecting the appropriate Location. If you wish to do this, you will need to

click on the “Location” pop-up menu and select “New Location…”. You will be asked

to name your new location.

5. Give your New Location a meaningful name and click OK. Make sure that the

Location you have just created is displayed in the Location pop-up menu.

6. If you do not wish to set up more than one Location, make sure that the Location

pop-upmenu is set to “Automatic”.

7. Click on the “Show” pop-up menu and select “Built in Ethernet”. Click on the TCP/

IP tab.The TCP/IP settings will be displayed. Click on the “Conﬁgure” pop-up menu

Mac

Set-up

(cont)

ADSL2+ Router

Mac User Guide

NB6Plus4 - 5

(“Conﬁgure iPV4” if you’re using Mac OS 10.3) and select “Using DHCP”. Click on

Apply Now to save the changes.

Your dialog box should now look like this:

8. If your Mac does not accept an IP address from the DHCP server in your NB6Plus4

and the IP address ﬁeld remains blank, try selecting “Using DHCP with manual

address” from the “Conﬁgure” pop-up menu (“Conﬁgure iPV4” if you’re using Mac

OS 10.3) and entering 192.168.1.3 in the “IP address” ﬁeld.

Mac

Set-up

(cont)

ADSL2+ Router

Mac User Guide

6 - NB6Plus4

9. Click on the “Show” pop-up menu and select “Network Status”. Check to see that

the bullet alongside “Built-in Ethernet” is green.

10. Close the Network window by clicking the red close button (System 10.3) or select

“Quit System Preferences” under the “System Preferences” menu (System 10.2 or

earlier).

Mac

Set-up

(cont)

ADSL2+ Router

Mac User Guide

NB6Plus4 - 7

Modem

Set-up

To conﬁgure your NB6Plus4 ADSL Modem, follow the steps below:

1. Open a web browser such as Safari or Internet Explorer.

2. In the Location Bar, type 192.168.1.1 and press Enter.

3. Enter the username and password. The default username is “admin”. The default

password is “admin”. Click on OK.

4. The NB6Plus4 conﬁguration page will be displayed. Enter the username and

password that your ISP has provided and click on “connect”.

5. After a few seconds, router will restart and lights will get stable. Once connected, PPP

light on front panel of the modem will come on. You will see this screen on your Mac.

ADSL2+ Router

Mac User Guide

8 - NB6Plus4

6. You have now completed the set-up which will be sufﬁcient for most uses. You

should now be able to access the Internet by selecting one of your Favorites or

Bookmarks or by entering a URL in the Location Bar.

9. You may need to change the settings in Mail, Outlook Express or whatever email

application you use. Your ISP will supply these settings.

10. If you need to perform more advanced conﬁgurations, please see the comprehensive

User Guide on the supplied CD-ROM for additional instructions.

Modem

Set-up

(cont)

Andere Handbücher für NB6Plus4

Inhaltsverzeichnis

Andere NetComm Netzwerk-Router Handbücher

NetComm

NetComm 3G42W-M Bedienungsanleitung

NetComm

NetComm NB4 Bedienungsanleitung

NetComm

NetComm Liberty Series 3G18Wn Bedienungsanleitung

NetComm

NetComm NP740n Bedienungsanleitung

NetComm

NetComm Freshtel NB9 Bedienungsanleitung

NetComm

NetComm NB9WMAXX Bedienungsanleitung

NetComm

NetComm NB3 Bedienungsanleitung

NetComm

NetComm Smart Hub 4G Bedienungsanleitung

NetComm

NetComm 3G25W-R Bedienungsanleitung

NetComm

NetComm HSPA+ M2M Kurzanleitung

NetComm

NetComm Freshtel NB9 Bedienungsanleitung

NetComm

NetComm G.SHDSL 4-port Security Modem Routers NB712 Bedienungsanleitung

NetComm

NetComm NF2 Betriebshandbuch

NetComm

NetComm N3G007W Bedienungsanleitung

NetComm

NetComm Gateway NB6-QSG Bedienungsanleitung

NetComm

NetComm 3G27WV-02 Bedienungsanleitung

NetComm

NetComm NCT-1000 Bedienungsanleitung

NetComm

NetComm V100 Bedienungsanleitung

NetComm

NetComm CF40MESH Bedienungsanleitung

NetComm

NetComm NP2005HS Bedienungsanleitung

NetComm

NetComm NB1300 Montage- und Wartungsanleitung

NetComm

NetComm NB5PLUS4 Bedienungsanleitung

NetComm

NetComm MyWay YMLO-3G8WV Bedienungsanleitung

NetComm

NetComm Liberty 3GM2WN Betriebshandbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise