NetComm NL1901ACV Service-Handbuch

Restore Factory Defaults Settings Guide

NL1901ACV

NL1901ACV – Restore Factory Defaults Settings Guide

1 of 4

FQ01131 v. 1.1 March 2019

About Factory Resets

A factory reset on the NL1901ACV returns all settings to the default settings as it was when shipped from the

factory.

Important

– It is particularly important to perform a factory reset after upgrading the NL1901ACV firmware to ensure the firmware

installation is completed correctly.

Factory Reset Methods

There are two methods that can be used to perform a successful factory reset:

Use the NL1901ACV's graphical user interface (GUI) to complete a factory reset.

Manually perform a factory reset using the reset pinhole at the back of the NL1901ACV.

This guide will explain both methods to complete a successful factory reset.

NL1901ACV – Restore Factory Defaults Settings Guide

2 of 4

FQ01131 v. 1.1 March 2019

Web Interface Factory reset

Connect a computer and the NL1901ACV using an Ethernet cable. (A yellow Ethernet cable was provided with your

NL1901ACV).

1Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address

bar and press Enter.

http://192.168.20.1

2Enter the following credentials in the User Name and Password fields:

User Name: admin

Password: The serial number found on the label on the back of the device

3Click the Login button.

Note

– If no authentication prompt is displayed or you see a request time out message, refer to the What if I cannot access Web User

Interface guide from FAQs section.

NL1901ACV – Restore Factory Defaults Settings Guide

3 of 4

FQ01131 v. 1.1 March 2019

Restore Default Settings from Web interface

1From the Management menu on the left-hand side of the screen select the Settings option and then select

the Factory Reset option from its sub-menu.

2The Tools -- Restore Default Settings screen displays:

Tools – Restore Default Settings screen

3To reset the NL1901ACV to its factory settings, click the Restore Default Settings button.

4A pop-up dialog box will prompt: “Are you sure you want to restore factory default settings?”

Reset command confirmation dialog

5Click OK to confirm the reset.

6The NL1901ACV will reboot.

7After the NL1901ACV has rebooted you will need to log in to the NL1901ACV and re-enter your broadband

connection settings such as your ADSL/VDSL User ID and Password, etc.

NL1901ACV – Restore Factory Defaults Settings Guide

4 of 4

FQ01131 v. 1.1 March 2019

Manual Factory Reset

1Ensure the NL1901ACV is powered on.

2On the back side of the NL1901ACV, there is a small hole in the plastic with the word “Reset” printed at the

bottom.

This is the recessed reset button:

Back panel of NL1901ACV showing Reset pinhole

3Insert the end of a paper-clip or other rigid, thin piece of metal into the Reset pinhole and depress and hold

in for 10-12 seconds.

If this does not happen:

aDisconnect the power supply cable for 30 seconds and then reconnect it.

bThen depress the Reset button and hold in for 10-12 seconds.

4The NL1901ACV is back to its factory defaults, you now need to reconfigure the broadband settings via the

user interface.

Note

– If you have backed up your configuration, then you can restore your settings by uploading your

.config

file.

To reconfigure:

1. Open a web browser (such as Internet Explorer, Google Chrome or Firefox),

2. Type http://192.168.20.1 into the address bar, and

3. Press

Enter.

5At the login screen, type the username/password and click Log In. The Default username and password are

printed on the sticker attached to the back of the router.

Andere Handbücher für NL1901ACV

Inhaltsverzeichnis

Andere NetComm Netzwerk-Router Handbücher

NetComm

NetComm Dynalink MyZone 3G24W Bedienungsanleitung

NetComm

NetComm 3G27WV-02 Bedienungsanleitung

NetComm

NetComm NTC-6000 SERIES Bedienungsanleitung

NetComm

NetComm NB6PLUS4W Bedienungsanleitung

NetComm

NetComm HSPA+ M2M Kurzanleitung

NetComm

NetComm NF20 Bedienungsanleitung

NetComm

NetComm NTC-6200-01 Bedienungsanleitung

NetComm

NetComm 3G38WV Bedienungsanleitung

NetComm

NetComm NB1300 Montage- und Wartungsanleitung

NetComm

NetComm 3G27WV-R Bedienungsanleitung

NetComm

NetComm NF10W Bedienungsanleitung

NetComm

NetComm NB5PLUS4W Kurzanleitung

NetComm

NetComm NTC-40WV Bedienungsanleitung

NetComm

NetComm 3GM1WN Bedienungsanleitung

NetComm

NetComm NB6PLUS4WN Bedienungsanleitung

NetComm

NetComm NB6 Bedienungsanleitung

NetComm

NetComm Poe01 Bedienungsanleitung

NetComm

NetComm NTC-220 Bedienungsanleitung

NetComm

NetComm NB4 Bedienungsanleitung

NetComm

NetComm Roadster V.92 AM5698 Bedienungsanleitung

NetComm

NetComm NB16WV-02 Bedienungsanleitung

NetComm

NetComm NB6PLUS4WN Bedienungsanleitung

NetComm

NetComm LIBERTY 3G22WV Bedienungsanleitung

NetComm

NetComm NF18ACV Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise