NETGEAR WNCE3001 Bedienungsanleitung

350 East Plumeria Drive

San Jose, CA 95134

USA

November 2011

202-10876-01

v1.0

Universal Dual Band WiFi

Internet Adapter

(WNCE3001)

User Manual

Universal Dual Band WiFi Internet Adapter (WNCE3001)

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form or by any means without the written permission of NETGEAR, Inc.

Technical Support

Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online, or

for more information about the topics covered in this manual, visit the Support website at:

http://support.netgear.com

Phone (US & Canada only): 1-888-NETGEAR

Phone (Other Countries): Check the list of phone numbers at:

http://support.netgear.com/app/answers/detail/a_id/984

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change

without notice. Other brand and product names are registered trademarks or trademarks of their respective

Statement of Conditions

To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes

to the products described in this document without notice. NETGEAR does not assume any liability that may occur

due to the use, or application of, the product(s) or circuit layout(s) described herein.

Table of Contents

Chapter 1 Getting Started

Unpack Your Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Top Panel with LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Power Connection Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Prepare to Change Your Internet Adapter Settings . . . . . . . . . . . . . . . . . . .9

Use the Smart Wizard to Change the Setup . . . . . . . . . . . . . . . . . . . . . . .10

Chapter 2 Advanced Settings

Device Status Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Show Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

DHCP Connection Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Manage Your Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Back Up Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Restore Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Erase the Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Advanced Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Use Push 'N' Connect (WPS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Chapter 3 Troubleshooting

Using the USB Power Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Connect to http://www.mywifiext.net. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Connect to Wireless Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Appendix A Factory Settings and Technical Specifications

Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Appendix B Notification of Compliance

1. Getting Started

Unpack Your Adapter

Open the box and remove the Internet adapter, cables, and installation guide.

WNCE3001

Ethernet cable USB power cable Power adapter

Stand Wall-mount sticker

Figure 1. Package contents

Your box should contain the following items:

• Universal Dual Band WiFi Internet Adapter (WNCE3001)

• Stand

• USB power cable

• Power adapter (plug varies by region)

• Flat Ethernet cable

• Wall-mount sticker

• Installation guide with cabling and Internet adapter setup instructions

If any parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the

carton and original packing materials in case you need to return the product for repair.

Getting Started

Universal Dual Band WiFi Internet Adapter (WNCE3001)

Hardware Features

Top Panel with LED

The WNCE3001 has one LED, which indicates the power and wireless connection status.

Top panel LED status Activity

Off Unit is not powered on.

Solid red Link quality is poor, based on the link rate, or the USB does not

supply enough power.

Blinking red If the LED blinks red at the rate of 0.5 seconds on, 0.5 seconds

off, the firmware is corrupt.

Solid amber Link quality is fair, based on the link rate.

Blinking amber System is booting up, or has been reset. The LED starts to blink

amber after the Reset button has been pressed for more than 5

seconds. The LED also blinks amber during a firmware upgrade.

Solid green Unit is powered on, and the link quality is good, based on the link

rate.

Blinking green Boot-up is complete, but no wireless connection is established,

so no IP address is obtained.

Rear Panel

Ethernet port Reset

button WPS

button

USB port

Figure 2. Rear panel

Getting Started

Universal Dual Band WiFi Internet Adapter (WNCE3001)

Power Connection Options

You can power on your Internet adapter using either of these methods:

• Connect the WNCE3001 to an electrical outlet with the included power adapter.

Figure 3. Power adapter

• Connect the WNCE3001 to any USB port with the included USB power cable:

Figure 4. USB power cable

Note: Make sure that the device where you connect the USB power cable

is powered on. Some USB ports on consumer electronic devices

cannot provide the power that the Internet adapter requires. In such

cases, the LED turns solid red, and the Internet adapter might reset

itself or turn itself off. Even if the Internet adapter is powered on

successfully, you might experience continuous disconnection during

file transfer. If this happens, try connecting the USB cable to a

different device, or use the Internet adapter power adapter instead.

Installation

The Universal Dual Band WiFi Internet Adapter (WNCE3001) Installation Guide, included in

the package, explains how to install your Internet adapter. The steps are summarized in this

section.

Getting Started

Universal Dual Band WiFi Internet Adapter (WNCE3001)

To install your Internet adapter:

1. Carefully peel off the protective film covering your adapter.

Figure 5. Peel off the protective film

2. You use a computer to set up the Internet adapter. During setup, make sure that your

computer is not connected to a router. You can restore the connection after the Internet

adapter installation is complete.

• Disconnect the Ethernet cable from your computer if you use it for a wired network

connection.

• If your computer is wirelessly connected to a network, stop your wireless connection.

3. Connect the Internet adapter to your computer.

Figure 6. Connect the Internet adapter to your computer

• Use an Ethernet cable (included) to connect the Internet adapter to your computer.

• Use either the USB power cable or the power adapter to provide power to the Internet

adapter. See Power Connection Options on page 6.

4. Open your Internet browser. It automatically displays the setup page. If the setup page is not

displayed, type either http://www.mywifiext.net, http://www.mywifiext.com,

http://mywifiext.net, or http://mywifiext.com as the browser address. You can use any of

these four browser addresses to log in to the Internet adapter.

Note: Internet Explorer records the browser address. If the Internet adapter's IP address

subsequently changes and you are still using Internet Explorer, you have to use one of

the other browser addresses to access the device.

5. Follow the instructions on the Setup page.

Getting Started

Universal Dual Band WiFi Internet Adapter (WNCE3001)

6. Disconnect the Ethernet and USB cables from your computer.

7. Connect the Internet adapter to your TV, XBox, or Blu-ray player.

If your device does not have a USB port, then use the power adapter cable that came

with your Internet adapter, and plug it into an electrical outlet. See Power Connection

Options on page 6.

8. Place your adapter at its permanent location.

You can either mount your adapter to a wall or other flat surface, or you can mount it

vertically on its stand.

Note: To ensure correct heat dissipation and for router stability, it is

important that you place your router in an upright position.

• Wall mounting. If mounting the Internet adapter to a wall or flat surface, paste the

sticker above the product label on the back of the unit, and then attach the unit to the

surface.

Figure 7. Wall-mount the Internet adapter

• Stand mounting. If mounting the Internet adapter on its stand, attach the stand as

shown.

Figure 8. Attach the stand to the Internet adapter

For optimal performance, install the stand.

Getting Started

Universal Dual Band WiFi Internet Adapter (WNCE3001)

9. Congratulations! Your installation is complete. You can return your computer to its usual

setup and begin using the Internet adapter.

Prepare to Change Your Internet Adapter Settings

If you want to change the settings for the Internet adapter after installation, then you need to

connect it to a computer while you are making changes.

Note: If your Internet adapter is mounted on its stand, remove the stand

before disconnecting any cables.

To change your Internet adapter settings:

1. Connect your Internet adapter to a computer with an Ethernet cable.

2. Connect either the USB power cable or the power adapter cable that came in the product

package tothe rear panel of your Internet adapter.

To supply power to your Internet adapter, use whichever method is more convenient for

you. See Power Connection Options on page 6.

Figure 9. Connect the WNCE3001 to a laptop

3. Launch an Internet browser such as Mozilla Firefox or Microsoft Internet Explorer. In the

address field, type http://www.mywifiext.net.

Getting Started

Universal Dual Band WiFi Internet Adapter (WNCE3001)

Unless you changed the settings on the Firmware Upgrade screen (see Upgrade the

Firmware on page 17), the software automatically checks for new firmware at the

NETGEAR website. Then the following screen displays:

The Device Status screen shows what the current settings are for the Internet adapter. A

menu in the left pane allows you to view or change the settings.

Use the Smart Wizard to Change the Setup

The Smart Wizard helps you set up your Internet adapter. For information about advanced

configuration, see Chapter 2, Advanced Settings.

The Universal Dual Band WiFi Internet Adapter (WNCE3001) Installation Guide, included in

the package, explains how to install your Internet adapter. During installation, when you

launch your Internet browser, the Smart Wizard automatically displays.

After installation, to use the Smart Wizard again:

1. Connect the Internet adapter to a computer, and go to http://www.mywifiext.net as

described in Prepare to Change Your Internet Adapter Settings on page 9.

Andere Handbücher für WNCE3001

Inhaltsverzeichnis

Andere NETGEAR Adapter Handbücher

NETGEAR

NETGEAR XAV1301v1/XAVB1301v1 Bedienungsanleitung

NETGEAR

NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0... Bedienungsanleitung

NETGEAR

NETGEAR 85 Mbps Wall-Plugged Ethernet Adapter XE103 Bedienungsanleitung

NETGEAR

NETGEAR A6210 Bedienungsanleitung

NETGEAR

NETGEAR XAVB1501 Bedienungsanleitung

NETGEAR

NETGEAR FA511 - 32-bit CardBus PC Card Mobile Bedienungsanleitung

NETGEAR

NETGEAR EA101 Bedienungsanleitung

NETGEAR

NETGEAR XAVB2602 Bedienungsanleitung

NETGEAR

NETGEAR XAV1601 Bedienungsanleitung

NETGEAR

NETGEAR WG111T - 108 Mbps Wireless USB 2.0 Adapter Bedienungsanleitung

NETGEAR

NETGEAR WNA3100 - Wireless-N 300 USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR RangeMax WN111v2 Bedienungsanleitung

NETGEAR

NETGEAR WNCE2001 - Ethernet to Wireless Adapter Bedienungsanleitung

NETGEAR

NETGEAR GA311 - Gigabit PCI Adapter Bedienungsanleitung

NETGEAR

NETGEAR WN111v1 - RangeMax Next Wireless USB 2.0... Bedienungsanleitung

NETGEAR

NETGEAR WG111v1 - 54 Mbps Wireless USB 2.0 Adapter Bedienungsanleitung

NETGEAR

NETGEAR WG111UNA - DOUBLE 108MBPS WRLS USB 2.0 Bedienungsanleitung

NETGEAR

NETGEAR MA111v1 - 802.11b Wireless USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR WNA1000 - Wireless-N 150 USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR WG121 - 54 Mbps Wireless USB 2.0 Adapter Bedienungsanleitung

NETGEAR

NETGEAR XAV101 - Powerline AV EN Adapter Bridge Bedienungsanleitung

NETGEAR

NETGEAR WNDA4100 Bedienungsanleitung

NETGEAR

NETGEAR Powerline 1200 Bedienungsanleitung

NETGEAR

NETGEAR PA101 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung

Koolatron

Koolatron AC16 Bedienungsanleitung