NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Bedienungsanleitung

Andere Handbücher für SSL312 - ProSafe SSL VPN Concentrator 25

4

Inhaltsverzeichnis

Andere NETGEAR Tor Handbücher

NETGEAR

NETGEAR CG3100Dv3 Bedienungsanleitung

NETGEAR

NETGEAR Sprint 6100D Technisches Datenblatt

NETGEAR

NETGEAR FVS318 - ProSafe VPN Firewall Router Bedienungsanleitung

NETGEAR

NETGEAR CG814WG Bedienungsanleitung

NETGEAR

NETGEAR ADT Pulse Gateway PGZNG1 Bedienungsanleitung

NETGEAR

NETGEAR DG814 - DSL Modem Internet Gateway Bedienungsanleitung

NETGEAR

NETGEAR CG814WG Bedienungsanleitung

NETGEAR

NETGEAR DEVG2020 DOT Bedienungsanleitung

NETGEAR

NETGEAR Sprint 6100D Bedienungsanleitung

NETGEAR

NETGEAR supernet Bedienungsanleitung

NETGEAR

NETGEAR CGD24N Bedienungsanleitung

NETGEAR

NETGEAR DG824M - 802.11b Wireless ADSL Modem Bedienungsanleitung

NETGEAR

NETGEAR CG814W Bedienungsanleitung

NETGEAR

NETGEAR CG3300CMR Bedienungsanleitung

NETGEAR

NETGEAR CG814M Bedienungsanleitung

NETGEAR

NETGEAR DG824M - 802.11b Wireless ADSL Modem Bedienungsanleitung

NETGEAR

NETGEAR D2200D-1FRNAS Bedienungsanleitung

NETGEAR

NETGEAR DVG834G Bedienungsanleitung

NETGEAR

NETGEAR C3000 Bedienungsanleitung

NETGEAR

NETGEAR CG4500BDv2 Bedienungsanleitung

NETGEAR

NETGEAR CG3000D Bedienungsanleitung

NETGEAR

NETGEAR CG814W Bedienungsanleitung

NETGEAR

NETGEAR CVG824G Bedienungsanleitung

NETGEAR

NETGEAR DVG834N Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt

Troubleshooting Guide for SSL312 LDAP configuration

This guide will provide some tips on what you should check for before configuring the SSL312 to

authenticate through the LDAP Server.

NOTE: SSL312 does not currently support search for users within subtrees of a configured

BaseDN

Quick LDAP background:

LDAP = Lightweight Direct Access Protocol

Controls in a very fine-grained manner -- “who can do what to the data”

Extension of Active Directory which queries for additional information such as groups,

organizations,

DN = Distinguished Name

•Think of the DN as a full filename i.e.: dn: cn=John,dc=example,dc=com

CN = Common Name

•Username, group name or container that stores all the user/group names –i.e.:

Marketing, Users, etc…

DC = Domain Component

•Domain name –i.e.: NETGEAR.COM or NETGEAR.LOCAL

OU = Organization Unit

•Organization unit –i.e.: OU=marketing

Before you begin setting up the SSL312 for LDAP configuration, you should check to verify that

your LDAP server and its users are working properly. Below are some of the built-in commands

on Windows 2003 Server that you can use to verify the status of your LDAP server.

In the examples below, we have configured an LDAP server with the following settings:

•Windows 2003 Server

•Domain = NETGEAR.LOCAL

•Organization Unit = Marketing

1) List ALL the users under the “Users” group or container under the domain “Netgear.local”

At the MS-DOS prompt, type “dsquery user cn=users,dc=netgear,dc=local”(without quotes)

•Dsquery is theWindows built-in command to begin the LDAP query

•User indicate the name of the container where you want to do the query

2) To list ALL the users with the username begins with “user” – this is helpful to verify what

group or container a user belong to and whether or not the user has been added to the LDAP

properly.

At the MS-DOS prompt, type “dsquery user –name user*” (without quotes)

•-name tells the server to run the query by name matches to what has been

specified, in this case, search for user with name begins with “user”

•* (asterisk) signifies wildcard

3) To list ALL users in the “Market” Organizational Unit (OU) – this is helpful to verify if a

particular user belongs to a specified OU.

At the MS-DOS prompt, type “dsquery user ou=marketing,dc=netgear,dc=local” (without

quotes)

4) To list all the Organization Unit (OU) that has name starting with “mark” – this is helpful to

verify all the OU in the local domain.

At the MS-DOS prompt, type “dsquery ou –name mark*” (without quotes)

5) To list all group or container that has name starting with “SSL”

At the MS-DOS prompt, type “dsquery group –name SSL*” (without quotes)

How to configure the SSL312 to authenticate through the LDAP server

1) Using the commands and examples above, you should be able to verify and confirm that

your LDAP server and users have been configured and added properly

2) Use one of the DSQUERY commands above to find out the LDAP BaseN string that you

will need to configure the SSL312. In the example below, we will list all the users belong

to the “Marketing” Organization Unit in the NETGEAR.LOCAL domain.

At the MS-DOS prompt, type “dsquery user ou=marketing,dc=Netgear,dc=local”

(without quotes)

3) Copy the string listed, to the LDAP BaseN field on the SSL312

4) Click Apply and reboot your SSL312 for changes to take effect. All users login onto this

domain in the future will be authenticated by the LDAP server.

Copy this string to the LDAP BaseN field on the

SSL312