NETGEAR DG632 - ADSL Modem Router Bedienungsanleitung

If software usually logs you in to the Internet, do not run it.

The Internet Explorer Tools Internet Options Connections page should be set to

“Never dial a connection.”

g. Install a filter on each phone device that shares the phone line with your router.

Note: Use one-line filters for connecting additional phones.

2Log in to the DG632

Note: Your computer needs to be configured for DHCP. For help with this, see the

Reference Manual or tutorials on the ADSL Modem Router Resource CD.

a. Connect to the router by typing http://192.168.0.1 in the address field of

Internet Explorer or Netscape®Navigator.

b. When prompted, enter admin for the user name and password for the password,

both in lower case letters. After logging in, you will see the menu below.

If you do not see the menu above, click the Setup Wizard link on the upper left

of the main menu.

Start Here

Follow these instructions to set up your ADSL Modem Router.

Before you begin, locate the ADSL configuration information from your Internet Service

Provider (ISP). Also, if you purchased the DG632 in a country where a microfilter is not

included, you must acquire one.

1Connect the DG632 to the ADSL Line

ADSL signals degrade phone sound quality. Microfilters block such problems and are

required for each phone or fax. There are two types: one-line microfilters; and two-

line microfilters which include a built-in splitter. Sharing a phone outlet with two

devices requires a splitter.

The procedure below illustrates using a two-line combo

microfilter/splitter. You can accomplish the same result

using a one-line microfilter with a separate phone line

splitter.

a. Insert the filter into the phone outlet and connect

the phone to the phone connector (A).

b. Turn off your computer.

c. Connect the ADSL port (B) of the DG632 to the ADSL connector of the

two-line filter.

Note: Improperly connecting a filter to your DG632 will block ADSL signals

and prevent connecting to the Internet.

d. Connect the Ethernet cable (C) from a LAN port of your DG632 to the

Ethernet adapter in your computer.

e. Plug in the router and verify the following:

The power light is lit after applying power to the router.

The ADSL link light is solid green, indicating a link has been

established to the ADSL network.

f. Now, turn on your computer and verify the following:

The local lights are lit for any connected computers.

ADSL Modem Router DG632

Installation Guide

Phone

DSL

Line

Phone

DSL

Line

Two-Line Combo

Microfilter/Splitter

One-Line Microfilter Splitter

Phone

DSL

Line

DG632 ADSL Modem Router

Phone

DSL

Line

DG632 ADSL

Modem Router

3Connect to the Internet

a. Choose your country. Click Next to let the Setup Wizard detect the type of

Internet connection your have.

b. Follow the steps in the Setup Wizard to input the Internet configuration

parameters from your ISP.

Note: If you were unable to connect to the router, please refer to the

Troubleshooting Chapter in the Reference Manua on the ADSL Modem Router

Resource CD which came with the router.

*201-10090-01*

201-10090-01 February 2004

trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered

trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product

names are trademarks or registered trademarks of their respective holders. Information is subject to change

Technical Support

PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED

WITH YOUR PRODUCT.

By registering your product at www.NETGEAR.com/register, we can provide you with

faster expert technical support and timely notices of product and software upgrades.

Andere Handbücher für DG632 - ADSL Modem Router

Inhaltsverzeichnis

Andere NETGEAR Netzwerk-Router Handbücher

NETGEAR

NETGEAR MR814V2 - 802.11b Cable/DSL Wireless Router Bedienungsanleitung

NETGEAR

NETGEAR VPN Bedienungsanleitung

NETGEAR

NETGEAR WNDR4500 Bedienungsanleitung

NETGEAR

NETGEAR AC1450 Bedienungsanleitung

NETGEAR

NETGEAR XEB1004 - 85 Mbps Powerline EN Switch Bedienungsanleitung

NETGEAR

NETGEAR Orbi RBK23 Bedienungsanleitung

NETGEAR

NETGEAR DG834Gv3 - 54 Mbps Wireless ADSL Firewall... Bedienungsanleitung

NETGEAR

NETGEAR RT210 Bedienungsanleitung

NETGEAR

NETGEAR XS512EM Bedienungsanleitung

NETGEAR

NETGEAR DM111PSP - ADSL2+ Ethernet Modem Bedienungsanleitung

NETGEAR

NETGEAR RangeMax WNR834B Bedienungsanleitung

NETGEAR

NETGEAR C3000v2 Bedienungsanleitung

NETGEAR

NETGEAR DG834Gv1 - 54 Mbps Wireless ADSL Firewall... Bedienungsanleitung

NETGEAR

NETGEAR MR814 - 802.11b Cable/DSL Wireless Router Bedienungsanleitung

NETGEAR

NETGEAR XE102 - Wall-Plugged EN Bridge Bedienungsanleitung

NETGEAR

NETGEAR LG2200-1USNAS Bedienungsanleitung

NETGEAR

NETGEAR GS750E Bedienungsanleitung

NETGEAR

NETGEAR RBRE960 Bedienungsanleitung

NETGEAR

NETGEAR RT338 Bedienungsanleitung

NETGEAR

NETGEAR RAX45 Bedienungsanleitung

NETGEAR

NETGEAR ORBI PRO Bedienungsanleitung

NETGEAR

NETGEAR GS908E Bedienungsanleitung

NETGEAR

NETGEAR R6260 Bedienungsanleitung

NETGEAR

NETGEAR RBR760 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung