NETGEAR Super-G WGT624 Bedienungsanleitung
Installation Guide
Note: Be sure to take advantage of the new software update feature of
your WGT624. After you connect the WGT624 to the Internet, it will
automatically check for new software updates. When you get the message
that new software is available, click Yes to update your router with the
latest software enhancements.
Follow these quick steps to install your router.
Before you begin, locate the broadband Internet configuration settings
from your cable company. You can also consult the Install Assistant on the
Resource CD for 108 Mbps Wireless Firewall Router.
1
1Connect the Router
a. Turn off your computer and cable or DSL modem.
b. Disconnect the Ethernet cable from your computer (A) which
connects to your cable or DSL modem.
c. Connect the Ethernet cable from your cable or DSL modem to
the Internet port (A) on the WGT624.
d. Connect the Ethernet cable which came with the router from a
Local port on the router (B) to your computer.
e. Turn on the cable or DSL modem and wait about 30 seconds for
the lights to stop blinking.
f. Now, turn on your computer. If software usually logs you in to
your Internet connection, do not run that software or cancel it if
it starts automatically.
g. Verify the following:
When you turn the router on, the power light goes on.
The local lights are lit for any connected computers.
The Internet light is lit, indicating a link has been
established to the cable or DSL modem.
Note: For wireless placement and range guidelines, and wireless
configuration instructions, please see the Reference Manual on
the Netgear web site at
http://www.NETGEAR.com/docs/wgt624/index.htm.
Cable or DSL modem
2
2Log In to the Router
Note: To connect to the router, your computer needs to be
configured to obtain an IP address automatically via DHCP. For
instructions on how to do this, please see the Windows TCP/IP
Configuration Tutorials section of the Reference Manual on the
Netgear web site at http://www.NETGEAR.com/docs/wgt624/index.htm.
a. Connect to the router by typing http://192.168.0.1 in the address
field of Internet Explorer or Netscape®Navigator.
b. For security reasons, the router has its own user name and
password. When prompted, enter admin for the router user
name and password for the router password, both in lower
case letters.
Note: The user name and password are not the same as any user
name or password you may use to log in to the Internet.
3
3Connect to the Internet
a. You are now connected to the router. If you do not see the menu
above, click the Smart Wizard link on the upper left of the
main menu.
b. Click Next to follow the steps in the Smart Wizard to input the
router configuration settings. See the green ISP Guide for help
with identifying your ISP settings.
A
108 Mbps Wireless Firewall Router WGT624
4
108 Mbps Wireless
Firewall Router WGT624
Cable or DSL modem
108 Mbps Wireless
Firewall Router WGT624
Cable or DSL modem
B
A
Attention: When you configure the wireless
settings of the device please make sure to select
the correct country settings. Due to EU-law the
country settings must be identical to the country, where the device is
operating (important due to non-harmonized frequencies in the EU).
802.11b Restrictions: European standards dictate maximum radiated
transmit power of 100mW EIRP and frequency range 2.400 - 2.4835
GHz. In France, the equipment must be restricted to the 2.4465 - 2.4835
GHz frequency range and must be restricted to indoor use.
*M-10153-01*
M-10153-01 July 2003
Technical Support
PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT
SHIPPED WITH YOUR PRODUCT.
By registering your product at www.NETGEAR.com/register, we can
provide you with faster expert technical support and timely notices of
product and software upgrades.
NETGEAR, INC.
Support Information
Phone: 1-888-NETGEAR (For US & Canada only) - 24 x 7 phone support
See Support information card for other countries.
www.NETGEAR.com
©2003 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy and Everybody's
Connecting are trademarks or registered trademarks of Netgear, Inc. in the United States
and/or other countries. Microsoft and Windows are registered trademarks of Microsoft
Corporation in the United States and/or other countries. Other brand and product names
are trademarks or registered trademarks of their respective holders. Information is subject to
change without notice. All rights reserved.
c. When prompted with the message that new software is available,
click Yes to update your router with the latest software enhance-
ments for your router.
d. At the end of the Smart Wizard, click the Test button to verify
your Internet connection and register your product.
Note: If you are unable to connect to the router, please refer to
the Troubleshooting Tips section on the Resource CD for 108
Mbps Wireless Firewall Router.
!
0984
Andere Handbücher für Super-G WGT624
5
Inhaltsverzeichnis
Andere NETGEAR Netzwerk-Router Handbücher
NETGEAR
NETGEAR DG834 - ADSL Firewall Router Bedienungsanleitung
NETGEAR
NETGEAR ProSafe JFS524 Bedienungsanleitung
NETGEAR
NETGEAR FSM7328SNA Bedienungsanleitung
NETGEAR
NETGEAR XR500 Nighthawk Bedienungsanleitung
NETGEAR
NETGEAR N450 WNR2500 Bedienungsanleitung
NETGEAR
NETGEAR MR90 Bedienungsanleitung
NETGEAR
NETGEAR R6300 Bedienungsanleitung
NETGEAR
NETGEAR Nighthawk AX4 Bedienungsanleitung
NETGEAR
NETGEAR Nighthawk X4SAC2600 Bedienungsanleitung
NETGEAR
NETGEAR AC1200 JR6100 Bedienungsanleitung
NETGEAR
NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall... Bedienungsanleitung
NETGEAR
NETGEAR WGR614v2 Bedienungsanleitung
NETGEAR
NETGEAR Nighthawk X10 Fehlerbehebungshandbuch
NETGEAR
NETGEAR WNHDE111 Bedienungsanleitung
NETGEAR
NETGEAR WGT624 v3 Bedienungsanleitung
NETGEAR
NETGEAR Nighthawk AC2600 Bedienungsanleitung
NETGEAR
NETGEAR RH348 Bedienungsanleitung
NETGEAR
NETGEAR RP614 v2 Bedienungsanleitung
NETGEAR
NETGEAR RBRE960B Bedienungsanleitung
NETGEAR
NETGEAR D6220 Merkblatt
